What is the Makeblock XTool D1? 1000w Fiber Laser Cutting Machine Factories
XTool D1 is a laser cutter that has been produced by Makeblock. 1000w Fiber Laser Cutting Machine Factories
The company was developed in 2012 by Jasen Wang, that studied aircraft layout at Northwestern Polytechnic University. The firm is committed to developing cutting-edge products to aid people express themselves via creation. Since its production, Makeblock has released several instructional robots, along with a coding system for children. It additionally introduced the MakeX Robotic Competition.
The XTool D1 is a mobile laser engraver that is capable of reducing as well as engraving a selection of products. Its laser can remove detailed forms much faster than a scroll saw or jigsaw, and also can be utilized for various tasks. In addition to inscription, the D1 can additionally be utilized for other jobs, including producing jewelry as well as lamp tones.
The D1 is a DIY kit that can be set up in just about half a hr. Its unit is foldable, allowing for simple mobility and reliable air flow. It is additionally constructed from flame-retardant polyester, making it safe from dirt particles. The room likewise protects the functioning surface under the machine.
The XTool D1 is equipped with a laser module that is capable of engrave on steels and also numerous various other materials. It has an ultra-fine compressed laser area of 0.08 x 0.08 mm. This enables finer inscription as well as higher precision.
The D1 likewise has a high resolution of 1000 DPI, which makes it feasible to engrave on a variety of materials. The D1 additionally has an integrated smart device application that can be downloaded and install from the Android Shop or the Apple App Shop. The app can be utilized to import laser designs from complimentary vector sites, including Etsy. The D1 can likewise be connected to a computer through USB or WiFi. It can likewise move data through Wi-Fi or a huge capacity TF card.
The D1 is capable of etching on Poplar plywood, which is one of one of the most commonly utilized woods for laser cutters. The D1 can also cut on various other woods, consisting of hard maple, walnut, and rosewood. Its laser head is adjustable, enabling a 50mm array. It can additionally process products approximately 10mm thick, which means that it has the ability to etch on a wide array of materials. The D1 is developed for both residence and company usage.
The XTool D1 comes in two designs: the 20W version as well as the 5W design. The 20W variation has a larger laser head, and also a smaller sized working location. The 5W design has a workplace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, which makes it a faster machine. 1000w Fiber Laser Cutting Machine Factories
The D1 includes a steel structure, which supplies maximum security as well as toughness. It likewise has a concurrent belt to boost motion precision. The belt’s moderate stress is required for accuracy, specifically when relocating at high speeds. The synchronous belt can likewise help the device stay steady and lessen resonance. It can also get rid of the movement gap, allowing for great vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most effective diode laser on the marketplace. It generates clear lines to 0.06 mm. This makes it an excellent choice for mostly all etching tasks. Its style is safe and also trustworthy. It is optimal for small companies and also hobbyists.
It can inscribe various sorts of steel and also wood. It has the ability to reduce eight to tenmm plywood in one pass. It likewise has the capacity to reduce natural leather as well as acrylic.
It includes a variety of accessories. You can acquire the package pack that includes the Air Assist Set as well as Honeycomb Working Panel. It costs $119 and also $269, respectively. You can additionally obtain a 1064nm laser head. This head minimizes melt marks in plastic and is particularly helpful for delicate jewelry styles. It additionally has a movement sensing unit and fire discovery sensing unit.
It also features an emergency situation stop button. It can be managed through Wi-fi and can import laser layouts from cost-free vector sites like Etsy. You can also control it via the Makeblock XTool D1 app on Android and iOS.
It has a great emphasis system. The laser crosshairs move as required and transfer to the framework of the art work. This makes the inscribing very precise. It can likewise be made use of to create a thickening result, which can be valuable when etching huge products.
The XTool D1 Pro has improved features as well as laser power. It utilizes a 20W laser module to create a beam of light that reduces objects in one pass. It can cut through 8mm black acrylic and 10mm basswood. It additionally has a greater speed. It can reach etching accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating method on this equipment is extremely brilliant. Next to the laser module, there is a pivoting arm which you take out when you intend to concentrate the laser. It guarantees that you go down the directly the proper range from the product. Then you tighten up the thumb screw and also pivot the arm back up. 1000w Fiber Laser Cutting Machine Factories
XTool D1 Special Features
Here are some of the leading Unique Functions of the XTool D1:
Wireless Connectivity
Maker can be attached by means of USB or a Wi-fi. And you can likewise regulate with a mobile phone application on Android or iOS.
Trimming as well as Engraving Different Materials
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Layer Metal, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Cloth, Slate.
The Makeblock XTool D1 is additionally a very qualified laser cutter.
Cut: Cardboard, Non-woven Fabric, Timber Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can cut more than 10mm thick things with this laser engraver. The machine can reduce wood, specifically Poplar plywood which is soft as well as it is the recommended wood for all laser cutters.
I would certainly stay clear of some plastics like PVC as well as plastic given that it releases hydrogen chloride gas while being reduced. This gas is harmful and extremely destructive (your equipment will certainly rust quickly).
We have evaluated the maker with engraving as well as cutting different products. You will certainly discover the results of our tests couple of chapters lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have seen on all other makers. This need to enable more precision and much less mechanical wobble when engraving at high speeds. 1000w Fiber Laser Cutting Machine Factories
Advanced Stepper Motor Drivers
The machine has a very advanced controller board. It has Trinamic stepper motor drivers which drive the electric motors with a pure sine wave. In this manner the electric motors are very precise and also silent. The drivers also sustain homing procedure without making use of limit switches as the motorists gauge current through motors and also find the limit this way. This is why this equipment does not need physical limitation switches over for homing.
The maker has chauffeurs for 3 axis– so you can plug in the roller system as a Z axis rather than having to disconnect among the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be controlled using Wi-Fi or USB. The laser engraver device immediately quits if an accidental touch takes place. This is great for individuals who are concerned concerning safety. The device is likewise compatible with Windows and Mac OS systems.
The XTool D1 software application is very easy to use. Once you have the artwork prepared, you can make use of the app to set up the laser. You can also customize the laser settings as well as create custom-made artwork. The application additionally includes a materials listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing machine that can etch over 100 materials. The laser engraver device is easy to use and also features a protective cover. The equipment has a guarantee of year.
XTool D1 Engraving
The XTool D1 is a really flexible engraving equipment. It cam be used to engrave on all types of materials/.
Below is a checklist of materials and features that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a very well considered device. Exact, quick and sturdily built. It comes at a premium price, but it deserves it for someone that desires a great and almost a commercial grade table top laser engraver efficient in quick cutting as well as specific engraving thanks to an effective 10W laser component.
Is XTool better than Glowforge?
The initial laser engraving and also cutting device on our list is XTool D1 pro, the best option to Glowforge. It remains in top place since it has actually gotten the Red Dot Design 2022 Award. The outstanding design and also advanced innovation established this machine in addition to other equipments on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, and also XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm timber board at once, as well as XTool D1-10W can reduce 10mm wood board at one time.
Can XTool D1 cut leather?
XTool can reduce and etch a massive range of products, from something as slim as cells paper to something as thick as natural leather and wood panels.
XTool D1 is a diode laser engraving and cutting device that is compatible with a large range of products, including various sorts of wood. Its effective as well as extremely focused laser can conveniently cut and etched timber with ultimate accuracy as well as precision.
Can the XTool D1 engrave alliminum?
You can likewise get the infrared laser module, which is specifically made for steel and also plastic inscription. It can inscribe numerous metals, including aluminum as well as precious metals. It can also do tinted inscribing on numerous metals, consisting of light weight aluminum.
1000w Fiber Laser Cutting Machine Factories 1000w Fiber Laser Cutting Machine Factories