What is the Makeblock XTool D1? 20000w Laser Cutting Machine
XTool D1 is a laser cutter that has actually been produced by Makeblock. 20000w Laser Cutting Machine
The firm was established in 2012 by Jasen Wang, who researched airplane design at Northwestern Polytechnic College. The business is committed to developing cutting-edge products to assist individuals reveal themselves with development. Since its production, Makeblock has launched numerous instructional robots, along with a coding system for kids. It also released the MakeX Robotic Competition.
The XTool D1 is a portable laser engraver that is capable of cutting and engraving a selection of materials. Its laser can eliminate elaborate forms much faster than a scroll saw or jigsaw, and can be used for many different tasks. In addition to inscription, the D1 can also be used for other projects, including developing jewelry as well as light tones.
The D1 is a DIY set that can be put together in only concerning half a hr. Its unit is foldable, allowing for easy transportability and effective air flow. It is additionally made from flame-retardant polyester, making it secure from dirt fragments. The enclosure additionally secures the functioning surface under the device.
The XTool D1 is equipped with a laser module that can engrave on metals and several other materials. It has actually an ultra-fine compressed laser place of 0.08 x 0.08 mm. This allows for finer inscription as well as higher accuracy.
The D1 also has a high resolution of 1000 DPI, that makes it possible to engrave on a large range of materials. The D1 additionally has an integrated smartphone application that can be downloaded and install from the Android Shop or the Apple Application Store. The app can be utilized to import laser designs from cost-free vector websites, consisting of Etsy. The D1 can additionally be connected to a computer system using USB or WiFi. It can additionally move information via Wi-Fi or a big ability TF card.
The D1 is capable of inscribing on Poplar plywood, which is one of one of the most typically made use of timbers for laser cutters. The D1 can also cut on other timbers, consisting of hard maple, walnut, and also rosewood. Its laser head is flexible, enabling a 50mm range. It can likewise refine products up to 10mm thick, which means that it has the ability to engrave on a wide range of materials. The D1 is made for both home as well as service use.
The XTool D1 comes in two models: the 20W version and also the 5W design. The 20W variation has a bigger laser head, as well as a smaller working location. The 5W version has a working area of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, that makes it a much faster device. 20000w Laser Cutting Machine
The D1 includes a steel structure, which gives maximum security and resilience. It also has a concurrent belt to boost movement accuracy. The belt’s modest tension is needed for precision, particularly when relocating at high speeds. The concurrent belt can likewise aid the machine stay stable as well as decrease vibration. It can also remove the motion space, allowing for fine vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most effective diode laser on the marketplace. It produces clear lines to 0.06 mm. This makes it an exceptional selection for mostly all etching jobs. Its style is secure and trustworthy. It is perfect for small companies and enthusiasts.
It can engrave various types of steel as well as timber. It has the capability to cut eight to tenmm plywood in one pass. It likewise has the capacity to cut leather as well as acrylic.
It features a number of accessories. You can buy the bundle pack that includes the Air Assist Set and Honeycomb Working Panel. It costs $119 as well as $269, specifically. You can additionally get a 1064nm laser head. This head minimizes shed marks in plastic as well as is specifically valuable for delicate jewelry layouts. It likewise has a motion sensor and also fire detection sensor.
It likewise includes an emergency situation stop button. It can be controlled with WiFi and can import laser styles from free vector sites like Etsy. You can additionally manage it through the Makeblock XTool D1 application on Android and iOS.
It has an excellent focus device. The laser crosshairs move as required and also relocate to the framework of the artwork. This makes the inscribing really accurate. It can additionally be made use of to create a thickening effect, which can be beneficial when inscribing huge products.
The XTool D1 Pro has actually enhanced functions and laser power. It uses a 20W laser module to produce a beam that reduces objects in one pass. It can cut through 8mm black acrylic and 10mm basswood. It also has a greater speed. It can reach etching accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating technique on this machine is extremely smart. Alongside the laser component, there is a rotating arm which you pull out when you wish to focus the laser. It ensures that you drop the head on the right distance from the product. Then you tighten up the thumb screw and also swivel the arm back up. 20000w Laser Cutting Machine
XTool D1 Special Features
Right here are some of the leading Unique Functions of the XTool D1:
Wireless Connectivity
Device can be attached through USB or a WiFi. And also you can additionally control with a mobile phone application on Android or iphone.
Cutting and also Inscription Different Materials
Engrave: Timber, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Area Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is additionally a really capable laser cutter.
Cut: Cardboard, Non-woven Material, Timber Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can reduce greater than 10mm thick things with this laser engraver. The maker can reduce wood, particularly Poplar plywood which is soft and it is the recommended timber for all laser cutters.
I would stay clear of some plastics like PVC as well as plastic since it launches hydrogen chloride gas while being reduced. This gas is toxic and extremely destructive (your device will rust quickly).
We have checked the maker with engraving and cutting different materials. You will locate the results of our tests couple of phases lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have actually seen on all other equipments. This need to allow for even more precision and also less mechanical wobble when etching at broadband. 20000w Laser Cutting Machine
Advanced Stepper Electric Motor Drivers
The machine has an extremely advanced controller board. It has Trinamic stepper electric motor motorists which drive the motors with a pure sine wave. In this manner the motors are extremely exact and silent. The motorists likewise sustain homing procedure without using limit switches as the chauffeurs gauge existing through motors and spot the limit this way. This is why this equipment does not need physical limitation changes for homing.
The device has drivers for 3 axis– so you can connect in the roller system as a Z axis rather than having to detach one of the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be regulated by means of Wi-Fi or USB. The laser engraver device automatically quits if an unexpected touch occurs. This is terrific for individuals who are worried about security. The device is additionally suitable with Windows and Mac OS systems.
The XTool D1 software program is really easy to use. As soon as you have actually the artwork prepared, you can make use of the application to set up the laser. You can also tailor the laser setups and also develop personalized artwork. The application additionally consists of a materials checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting device that can engrave over 100 products. The laser engraver device is easy to use and also comes with a protective cover. The maker has a service warranty of 12 months.
XTool D1 Engraving
The XTool D1 is a really flexible inscribing equipment. It cam be used to inscribe on all sorts of materials/.
Below is a checklist of materials and features that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a very well considered machine. Exact, fast as well as sturdily built. It comes with a costs rate, yet it deserves it for someone that wants a good as well as practically an industrial grade table top laser engraver with the ability of fast cutting and also specific inscription thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The first laser engraving and also cutting device on our list is XTool D1 pro, the most effective choice to Glowforge. It remains in top place since it has actually obtained the Red Dot Design 2022 Award. The exceptional design and also advanced innovation set this equipment aside from other equipments on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, and XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm timber board at once, and also XTool D1-10W can cut 10mm timber board at one time.
Can XTool D1 cut leather?
XTool can reduce and engrave a big range of materials, from something as slim as tissue paper to something as thick as leather and also timber panels.
XTool D1 is a diode laser inscription as well as reducing maker that is compatible with a variety of materials, including various sorts of wood. Its effective and also very focused laser can conveniently cut as well as engraved timber with ultimate precision and also accuracy.
Can the XTool D1 engrave alliminum?
You can likewise get the infrared laser component, which is particularly created steel and plastic engraving. It can inscribe various metals, consisting of aluminum as well as precious metals. It can additionally do colored etching on different metals, consisting of light weight aluminum.