What is the Makeblock XTool D1? 3 Axis 3018 Grbl Control + 500mw Laser Diy Cnc Router Milling Engraving Machine
XTool D1 is a laser cutter that has actually been developed by Makeblock. 3 Axis 3018 Grbl Control + 500mw Laser Diy Cnc Router Milling Engraving Machine
The firm was developed in 2012 by Jasen Wang, that researched aircraft layout at Northwestern Polytechnic University. The firm is dedicated to creating cutting-edge items to help individuals express themselves with development. Because its development, Makeblock has actually launched several educational robots, along with a coding system for youngsters. It also launched the MakeX Robot Competitors.
The XTool D1 is a mobile laser engraver that can cutting as well as etching a selection of materials. Its laser can eliminate complex forms much faster than a scroll saw or jigsaw, and can be used for several tasks. Along with inscription, the D1 can also be made use of for other projects, consisting of creating precious jewelry as well as lamp tones.
The D1 is a DIY package that can be set up in just about half an hour. Its unit is collapsible, allowing for simple transportability and also effective ventilation. It is additionally made from flame-retardant polyester, making it secure from dirt bits. The room additionally shields the functioning surface under the maker.
The XTool D1 is furnished with a laser component that is capable of engrave on steels and also numerous other materials. It has actually an ultra-fine pressed laser spot of 0.08 x 0.08 mm. This permits finer engraving and also higher accuracy.
The D1 also has a high resolution of 1000 DPI, that makes it feasible to inscribe on a vast array of products. The D1 additionally has a built-in smart device app that can be downloaded from the Android Store or the Apple App Shop. The app can be utilized to import laser designs from complimentary vector sites, consisting of Etsy. The D1 can additionally be connected to a computer using USB or WiFi. It can also move information by means of Wi-Fi or a large capability TF card.
The D1 is capable of engraving on Poplar plywood, which is just one of the most commonly used woods for laser cutters. The D1 can also reduce on various other timbers, including tough maple, walnut, and also rosewood. Its laser head is flexible, allowing for a 50mm array. It can additionally process materials as much as 10mm thick, which means that it has the ability to etch on a wide range of products. The D1 is made for both residence as well as service use.
The XTool D1 is available in two designs: the 20W variation and also the 5W model. The 20W version has a bigger laser head, as well as a smaller working area. The 5W model has a workplace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, which makes it a faster device. 3 Axis 3018 Grbl Control + 500mw Laser Diy Cnc Router Milling Engraving Machine
The D1 includes a steel frame, which provides maximum security and resilience. It also has a concurrent belt to boost motion precision. The belt’s moderate stress is required for accuracy, especially when moving at broadband. The concurrent belt can also assist the equipment stay steady and also minimize vibration. It can additionally eliminate the movement void, allowing for great vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most powerful diode laser on the market. It produces clear lines to 0.06 mm. This makes it an excellent option for almost all etching jobs. Its style is safe and trusted. It is suitable for small businesses and also hobbyists.
It can inscribe different sorts of steel and also timber. It has the capability to reduce eight to tenmm plywood in one pass. It additionally has the capacity to cut natural leather and also acrylic.
It comes with a number of accessories. You can get the package pack that includes the Air Help Establish and also Honeycomb Working Panel. It sets you back $119 and $269, respectively. You can additionally get a 1064nm laser head. This head reduces burn marks in plastic and also is particularly helpful for fragile jewelry designs. It likewise has a motion sensing unit as well as flame detection sensing unit.
It likewise features an emergency stop switch. It can be regulated through WiFi and also can import laser designs from complimentary vector sites like Etsy. You can also regulate it via the Makeblock XTool D1 app on Android as well as iphone.
It has an excellent focus system. The laser crosshairs move as required and also move to the structure of the art work. This makes the engraving extremely specific. It can additionally be utilized to create a thickening result, which can be valuable when engraving big items.
The XTool D1 Pro has improved functions as well as laser power. It uses a 20W laser component to develop a light beam that reduces things in one pass. It can puncture 8mm black acrylic and also 10mm basswood. It also has a greater speed. It can get to engraving accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing technique on this equipment is very clever. Alongside the laser component, there is a swivelling arm which you take out when you wish to concentrate the laser. It ensures that you go down the head on the proper range from the product. Then you tighten the thumb screw and also rotate the arm back up. 3 Axis 3018 Grbl Control + 500mw Laser Diy Cnc Router Milling Engraving Machine
XTool D1 Special Features
Right here are several of the top Unique Features of the XTool D1:
Wireless Connection
Machine can be connected using USB or a WiFi. And you can additionally regulate with a smartphone app on Android or iOS.
Trimming and also Engraving Different Materials
Engrave: Timber, Bamboo, Cardboard, Plastic, Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Area Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is additionally a really capable laser cutter.
Cut: Cardboard, Non-woven Fabric, Timber Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can cut more than 10mm thick stuff with this laser engraver. The maker can reduce wood, particularly Poplar plywood which is soft as well as it is the favored timber for all laser cutters.
I would certainly avoid some plastics like PVC and also vinyl because it releases hydrogen chloride gas while being reduced. This gas is poisonous as well as extremely destructive (your device will certainly corrosion rapidly).
We have actually checked the machine with engraving as well as reducing different products. You will find the results of our examinations couple of chapters lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have actually seen on all various other devices. This should allow for even more accuracy and also less mechanical wobble when etching at high speeds. 3 Axis 3018 Grbl Control + 500mw Laser Diy Cnc Router Milling Engraving Machine
Advanced Stepper Motor Drivers
The maker has a very sophisticated controller board. It has Trinamic stepper motor drivers which drive the electric motors with a pure sine wave. By doing this the electric motors are extremely precise and silent. The motorists additionally sustain homing treatment without using limitation changes as the chauffeurs gauge existing through motors as well as identify the limit by doing this. This is why this device does not need physical limit switches for homing.
The device has vehicle drivers for 3 axis– so you can connect in the roller system as a Z axis instead of needing to detach among the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be regulated using Wi-Fi or USB. The laser engraver device immediately stops if an unintentional touch occurs. This is great for people who are worried concerning safety and security. The device is also suitable with Windows and Mac OS systems.
The XTool D1 software program is very easy to use. When you have the artwork prepared, you can utilize the app to set up the laser. You can additionally customize the laser settings and develop custom artwork. The application additionally includes a products list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting equipment that can engrave over 100 materials. The laser engraver device is easy to use and features a protective cover. The device has a warranty of one year.
XTool D1 Engraving
The XTool D1 is a very versatile inscribing device. It cam be utilized to etch on all sorts of materials/.
Below is a checklist of materials as well as functions that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a quite possibly thought out equipment. Specific, fast and also sturdily built. It comes at a premium price, but it deserves it for someone that wants a good as well as virtually an industrial quality table top laser engraver with the ability of rapid cutting and specific inscription thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The first laser engraving and cutting machine on our list is XTool D1 pro, the most effective alternative to Glowforge. It is in top place due to the fact that it has actually gotten the Red Dot Design 2022 Award. The exceptional layout as well as state-of-the-art technology established this equipment in addition to other equipments on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, as well as XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm wood board at one time, and XTool D1-10W can reduce 10mm wood board at once.
Can XTool D1 cut leather?
XTool can cut and inscribe a huge variety of materials, from something as slim as cells paper to something as thick as natural leather as well as wood panels.
XTool D1 is a diode laser engraving and also cutting maker that works with a wide variety of materials, including various kinds of wood. Its powerful as well as extremely concentrated laser can conveniently cut and also engraved wood with utmost precision as well as precision.
Can the XTool D1 engrave alliminum?
You can additionally obtain the infrared laser component, which is specifically made for steel as well as plastic engraving. It can etch various metals, including light weight aluminum and also precious metals. It can also do colored engraving on various metals, consisting of light weight aluminum.
3 Axis 3018 Grbl Control + 500mw Laser Diy Cnc Router Milling Engraving Machine 3 Axis 3018 Grbl Control + 500mw Laser Diy Cnc Router Milling Engraving Machine