What is the Makeblock XTool D1? 3kw Co2 Laser Cutting Machine
XTool D1 is a laser cutter that has been produced by Makeblock. 3kw Co2 Laser Cutting Machine
The business was developed in 2012 by Jasen Wang, that researched airplane layout at Northwestern Polytechnic College. The business is dedicated to creating innovative products to assist individuals express themselves via development. Given that its creation, Makeblock has launched a number of educational robotics, along with a coding system for youngsters. It likewise introduced the MakeX Robot Competitors.
The XTool D1 is a mobile laser engraver that can reducing and etching a selection of products. Its laser can remove elaborate shapes much faster than a scroll saw or jigsaw, and can be utilized for various tasks. Along with inscription, the D1 can likewise be utilized for various other tasks, consisting of creating jewelry and also lamp tones.
The D1 is a do it yourself kit that can be assembled in just regarding half a hr. Its enclosure is collapsible, permitting simple portability as well as reliable air flow. It is additionally made from flame-retardant polyester, making it safe from dust bits. The room additionally shields the functioning surface area under the device.
The XTool D1 is outfitted with a laser component that can engrave on metals as well as numerous other products. It has an ultra-fine pressed laser area of 0.08 x 0.08 mm. This enables finer engraving and higher precision.
The D1 additionally has a high resolution of 1000 DPI, that makes it feasible to inscribe on a large range of products. The D1 additionally has a built-in mobile phone application that can be downloaded and install from the Android Store or the Apple Application Store. The application can be made use of to import laser styles from totally free vector websites, consisting of Etsy. The D1 can additionally be linked to a computer system using USB or WiFi. It can likewise transfer information using Wi-Fi or a big capability TF card.
The D1 is capable of inscribing on Poplar plywood, which is one of the most commonly made use of woods for laser cutters. The D1 can also reduce on various other woods, consisting of hard maple, walnut, as well as rosewood. Its laser head is adjustable, allowing for a 50mm range. It can additionally process materials approximately 10mm thick, which means that it has the ability to etch on a wide variety of materials. The D1 is designed for both home and also organization usage.
The XTool D1 comes in 2 models: the 20W version as well as the 5W design. The 20W variation has a larger laser head, and a smaller sized working area. The 5W model has a working area of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a much faster device. 3kw Co2 Laser Cutting Machine
The D1 includes a steel frame, which offers maximum stability as well as toughness. It likewise has a concurrent belt to boost movement accuracy. The belt’s moderate stress is required for accuracy, specifically when relocating at broadband. The synchronous belt can likewise help the device keep steady and decrease vibration. It can also get rid of the movement space, allowing for great vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most effective diode laser on the market. It creates clear lines to 0.06 mm. This makes it an exceptional option for almost all engraving tasks. Its layout is safe as well as trustworthy. It is ideal for small businesses as well as enthusiasts.
It can inscribe different sorts of metal as well as timber. It has the ability to cut 8 to tenmm plywood in one pass. It also has the ability to cut leather as well as acrylic.
It comes with a variety of accessories. You can purchase the package pack that includes the Air Assist Set as well as Honeycomb Working Panel. It costs $119 as well as $269, respectively. You can likewise get a 1064nm laser head. This head decreases shed marks in plastic as well as is particularly helpful for fragile fashion jewelry designs. It also has an activity sensing unit as well as fire detection sensing unit.
It also includes an emergency stop switch. It can be controlled with WiFi as well as can import laser layouts from free vector websites like Etsy. You can additionally regulate it via the Makeblock XTool D1 app on Android and also iphone.
It has a great focus device. The laser crosshairs move as required and relocate to the framework of the art work. This makes the inscribing very precise. It can likewise be made use of to develop a thickening result, which can be useful when etching huge products.
The XTool D1 Pro has actually boosted attributes as well as laser power. It utilizes a 20W laser module to produce a beam that reduces things in one pass. It can cut through 8mm black acrylic as well as 10mm basswood. It additionally has a greater rate. It can get to etching precision of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing approach on this machine is really clever. Beside the laser module, there is a pivoting arm which you take out when you intend to focus the laser. It guarantees that you go down the head on the correct range from the material. After that you tighten the thumb screw and pivot the arm back up. 3kw Co2 Laser Cutting Machine
XTool D1 Special Features
Right here are several of the leading Special Functions of the XTool D1:
Wireless Connectivity
Maker can be attached through USB or a Wi-fi. As well as you can additionally manage with a mobile phone application on Android or iphone.
Cutting and Engraving Different Products
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Area Layer Steel, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is also an extremely capable laser cutter.
Cut: Cardboard, Non-woven Textile, Timber Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can cut greater than 10mm thick stuff with this laser engraver. The maker can reduce timber, especially Poplar plywood which is soft and it is the preferred wood for all laser cutters.
I would prevent some plastics like PVC and also plastic since it launches hydrogen chloride gas while being reduced. This gas is hazardous and very harsh (your maker will rust rapidly).
We have actually examined the equipment with engraving and also cutting different materials. You will locate the results of our tests couple of chapters lower.
The Makeblock XTool D1 has steel rollers on all axis rather than the plastic ones we have seen on all other makers. This need to allow for even more precision as well as less mechanical wobble when engraving at high speeds. 3kw Co2 Laser Cutting Machine
Advanced Stepper Electric Motor Drivers
The equipment has a really innovative controller board. It has Trinamic stepper motor chauffeurs which drive the motors with a pure sine wave. In this manner the motors are extremely precise as well as silent. The drivers additionally support homing procedure without utilizing limitation switches as the chauffeurs gauge current through electric motors and also spot the limit this way. This is why this device does not need physical restriction switches for homing.
The machine has drivers for 3 axis– so you can plug in the roller system as a Z axis rather than having to detach among the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be regulated through Wi-Fi or USB. The laser engraver device instantly quits if an unexpected touch takes place. This is wonderful for individuals that are concerned about safety and security. The device is also suitable with Windows and also Mac OS systems.
The XTool D1 software application is really easy to use. When you have the artwork prepared, you can use the app to set up the laser. You can also customize the laser setups and create custom art work. The application additionally includes a materials checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting maker that can engrave over 100 materials. The laser engraver tool is easy to use as well as includes a safety cover. The device has a service warranty of one year.
XTool D1 Engraving
The XTool D1 is a really flexible etching maker. It cam be made use of to etch on all kinds of products/.
Right here is a list of products and functions that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a quite possibly thought out machine. Precise, quick as well as solidly constructed. It comes with a costs rate, however it is worth it for a person that desires an excellent and virtually a commercial grade table top laser engraver capable of quick cutting and specific inscription thanks to a powerful 10W laser component.
Is XTool better than Glowforge?
The very first laser engraving and cutting maker on our checklist is XTool D1 pro, the most effective option to Glowforge. It remains in top place since it has received the Red Dot Layout 2022 Honor. The impressive design and advanced technology established this device aside from other devices on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, and also XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm wood board at once, and also XTool D1-10W can reduce 10mm wood board at once.
Can XTool D1 cut leather?
XTool can cut and also inscribe a big selection of products, from something as slim as tissue paper to something as thick as leather and also timber panels.
XTool D1 is a diode laser inscription and cutting equipment that is compatible with a large range of products, consisting of different sorts of timber. Its effective and also very concentrated laser can easily cut as well as inscribed timber with supreme accuracy and precision.
Can the XTool D1 engrave alliminum?
You can also obtain the infrared laser component, which is specifically created steel and also plastic inscription. It can etch various steels, consisting of light weight aluminum as well as rare-earth elements. It can additionally do colored inscribing on different steels, including light weight aluminum.