What is the Makeblock XTool D1? 40w Co2 Laser Engraving Cutting Machine User Manual
XTool D1 is a laser cutter that has actually been created by Makeblock. 40w Co2 Laser Engraving Cutting Machine User Manual
The firm was established in 2012 by Jasen Wang, who examined aircraft style at Northwestern Polytechnic College. The company is committed to creating ingenious products to help individuals express themselves through development. Given that its development, Makeblock has released a number of academic robots, in addition to a coding platform for children. It also released the MakeX Robotic Competition.
The XTool D1 is a portable laser engraver that is capable of cutting as well as inscribing a selection of materials. Its laser can remove complex shapes much faster than a scroll saw or jigsaw, and can be made use of for many different tasks. Along with engraving, the D1 can also be made use of for various other projects, including producing jewelry and also light tones.
The D1 is a DIY package that can be set up in just about half an hour. Its room is collapsible, permitting simple portability and efficient air flow. It is likewise constructed from flame-retardant polyester, making it risk-free from dirt bits. The unit also secures the working surface under the equipment.
The XTool D1 is outfitted with a laser component that can engrave on metals and also several various other products. It has an ultra-fine pressed laser spot of 0.08 x 0.08 mm. This enables finer inscription and greater precision.
The D1 likewise has a high resolution of 1000 DPI, that makes it possible to etch on a variety of products. The D1 also has an integrated smart device application that can be downloaded from the Android Store or the Apple Application Shop. The app can be used to import laser designs from cost-free vector sites, consisting of Etsy. The D1 can additionally be linked to a computer system via USB or WiFi. It can additionally move data via Wi-Fi or a big capacity TF card.
The D1 can etching on Poplar plywood, which is among one of the most typically used woods for laser cutters. The D1 can also reduce on other timbers, including difficult maple, walnut, and also rosewood. Its laser head is flexible, allowing for a 50mm variety. It can likewise refine materials approximately 10mm thick, which indicates that it is able to etch on a variety of products. The D1 is developed for both residence and also service use.
The XTool D1 can be found in 2 versions: the 20W version and the 5W version. The 20W variation has a bigger laser head, and also a smaller sized working area. The 5W model has a workplace of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, which makes it a quicker maker. 40w Co2 Laser Engraving Cutting Machine User Manual
The D1 features a steel framework, which supplies maximum stability and also toughness. It also has a simultaneous belt to improve motion accuracy. The belt’s moderate stress is needed for accuracy, especially when relocating at broadband. The synchronous belt can additionally help the device stay steady and reduce resonance. It can likewise eliminate the movement void, allowing for great vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most powerful diode laser on the market. It creates clear lines to 0.06 mm. This makes it an excellent selection for mostly all engraving jobs. Its style is risk-free and reliable. It is perfect for small companies as well as enthusiasts.
It can etch different sorts of metal as well as timber. It has the capacity to reduce eight to tenmm plywood in one pass. It also has the capacity to reduce natural leather as well as polymer.
It features a variety of devices. You can get the bundle pack that consists of the Air Help Establish and also Honeycomb Working Panel. It sets you back $119 and also $269, respectively. You can also get a 1064nm laser head. This head reduces burn marks in plastic as well as is specifically useful for delicate precious jewelry layouts. It also has a movement sensing unit as well as flame discovery sensor.
It also features an emergency situation stop button. It can be regulated via Wi-fi and also can import laser layouts from free vector sites like Etsy. You can likewise control it by means of the Makeblock XTool D1 application on Android and also iOS.
It has a great focus mechanism. The laser crosshairs relocate as needed as well as relocate to the structure of the artwork. This makes the engraving very accurate. It can also be made use of to develop a thickening effect, which can be helpful when engraving huge things.
The XTool D1 Pro has actually improved functions and laser power. It makes use of a 20W laser module to develop a beam that cuts things in one pass. It can puncture 8mm black acrylic and 10mm basswood. It likewise has a greater speed. It can reach etching precision of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing approach on this device is very clever. Alongside the laser module, there is a rotating arm which you take out when you intend to concentrate the laser. It assures that you go down the directly the right distance from the material. After that you tighten the thumb screw as well as rotate the arm back up. 40w Co2 Laser Engraving Cutting Machine User Manual
XTool D1 Special Features
Here are a few of the top Unique Functions of the XTool D1:
Wireless Connection
Equipment can be linked using USB or a Wi-fi. And also you can likewise control with a smart device application on Android or iphone.
Cutting as well as Engraving Different Materials
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate.
The Makeblock XTool D1 is additionally a very qualified laser cutter.
Cut: Cardboard, Non-woven Textile, Wood Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can cut greater than 10mm thick stuff with this laser engraver. The machine can cut timber, specifically Poplar plywood which is soft as well as it is the recommended timber for all laser cutters.
I would prevent some plastics like PVC and vinyl given that it releases hydrogen chloride gas while being cut. This gas is hazardous as well as really destructive (your device will certainly rust promptly).
We have actually evaluated the maker with inscription as well as cutting different products. You will certainly find the outcomes of our examinations few phases lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have seen on all various other machines. This need to allow for more precision and less mechanical wobble when engraving at high speeds. 40w Co2 Laser Engraving Cutting Machine User Manual
Advanced Stepper Motor Drivers
The equipment has a really advanced controller board. It has Trinamic stepper motor drivers which drive the motors with a pure sine wave. In this manner the motors are very exact as well as silent. The vehicle drivers likewise support homing treatment without using limit changes as the drivers measure existing through motors and spot the limit this way. This is why this maker does not require physical limit changes for homing.
The maker has motorists for 3 axis– so you can plug in the roller system as a Z axis rather than having to separate among the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be controlled via Wi-Fi or USB. The laser engraver device instantly stops if an accidental touch happens. This is wonderful for individuals who are concerned about safety. The tool is also compatible with Windows as well as Mac OS systems.
The XTool D1 software program is really easy to use. As soon as you have actually the art work prepared, you can utilize the app to set up the laser. You can likewise personalize the laser settings and produce custom-made artwork. The application likewise includes a materials checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting equipment that can etch over 100 materials. The laser engraver device is easy to use and comes with a safety cover. The maker has a service warranty of twelve month.
XTool D1 Engraving
The XTool D1 is a very versatile engraving maker. It cam be used to inscribe on all types of products/.
Here is a listing of materials and attributes that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an extremely well considered maker. Accurate, quick and also well constructed. It comes at a costs rate, yet it deserves it for a person that desires a great and practically an industrial quality table top laser engraver efficient in rapid cutting and also accurate inscription thanks to a powerful 10W laser component.
Is XTool better than Glowforge?
The initial laser engraving and also reducing equipment on our list is XTool D1 pro, the very best alternative to Glowforge. It remains in top place due to the fact that it has received the Red Dot Layout 2022 Award. The superior layout and also cutting edge innovation established this equipment besides various other machines on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, and also XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm timber board at one time, and also XTool D1-10W can reduce 10mm wood board at once.
Can XTool D1 cut leather?
XTool can cut and also inscribe a big selection of materials, from something as slim as tissue paper to something as thick as leather as well as wood panels.
XTool D1 is a diode laser engraving and cutting maker that works with a wide variety of materials, consisting of various types of wood. Its powerful and extremely focused laser can quickly reduce and also engraved wood with ultimate precision and also accuracy.
Can the XTool D1 engrave alliminum?
You can also get the infrared laser module, which is particularly made for steel as well as plastic inscription. It can inscribe numerous metals, including aluminum and precious metals. It can additionally do colored inscribing on various steels, including light weight aluminum.
40w Co2 Laser Engraving Cutting Machine User Manual 40w Co2 Laser Engraving Cutting Machine User Manual