What is the Makeblock XTool D1? Advanced Engraving Machine
XTool D1 is a laser cutter that has actually been produced by Makeblock. Advanced Engraving Machine
The firm was established in 2012 by Jasen Wang, that researched airplane layout at Northwestern Polytechnic University. The firm is devoted to developing ingenious products to help individuals reveal themselves through creation. Considering that its development, Makeblock has actually released a number of academic robots, as well as a coding platform for children. It also released the MakeX Robotic Competitors.
The XTool D1 is a mobile laser engraver that is capable of cutting and also inscribing a selection of materials. Its laser can eliminate elaborate shapes much faster than a scroll saw or jigsaw, and also can be made use of for many different tasks. In addition to inscription, the D1 can additionally be utilized for other tasks, including developing fashion jewelry and lamp shades.
The D1 is a do it yourself set that can be set up in just about half an hour. Its room is foldable, allowing for easy transportability as well as effective ventilation. It is additionally made from flame-retardant polyester, making it secure from dust particles. The unit also secures the functioning surface under the equipment.
The XTool D1 is equipped with a laser component that can engrave on metals and many other products. It has an ultra-fine compressed laser area of 0.08 x 0.08 mm. This allows for finer inscription as well as higher accuracy.
The D1 also has a high resolution of 1000 DPI, which makes it feasible to engrave on a vast array of products. The D1 likewise has an integrated smart device app that can be downloaded from the Android Store or the Apple App Store. The app can be used to import laser layouts from free vector sites, including Etsy. The D1 can likewise be linked to a computer system by means of USB or WiFi. It can also move information using Wi-Fi or a large capability TF card.
The D1 is capable of engraving on Poplar plywood, which is among one of the most typically utilized timbers for laser cutters. The D1 can additionally cut on various other timbers, consisting of tough maple, walnut, and also rosewood. Its laser head is adjustable, permitting a 50mm range. It can likewise process materials up to 10mm thick, which implies that it is able to etch on a wide variety of materials. The D1 is created for both residence and also company use.
The XTool D1 comes in two models: the 20W variation and also the 5W design. The 20W version has a larger laser head, as well as a smaller sized working area. The 5W model has a working area of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a quicker maker. Advanced Engraving Machine
The D1 includes a steel frame, which gives maximum stability as well as durability. It also has a simultaneous belt to boost movement accuracy. The belt’s moderate tension is required for accuracy, particularly when relocating at broadband. The simultaneous belt can additionally assist the machine stay steady and decrease vibration. It can additionally remove the motion void, enabling great vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most effective diode laser on the marketplace. It generates clear lines down to 0.06 mm. This makes it an exceptional choice for almost all inscribing jobs. Its design is safe and also trusted. It is optimal for small companies as well as hobbyists.
It can engrave various types of metal and also wood. It has the capability to cut 8 to tenmm plywood in one pass. It additionally has the capacity to reduce natural leather and also polymer.
It comes with a number of devices. You can acquire the bundle pack that includes the Air Assist Set and also Honeycomb Working Panel. It costs $119 as well as $269, respectively. You can additionally obtain a 1064nm laser head. This head reduces burn marks in plastic and also is especially helpful for delicate precious jewelry layouts. It also has a movement sensor and also fire discovery sensing unit.
It additionally features an emergency situation stop switch. It can be regulated via Wi-fi and can import laser designs from cost-free vector sites like Etsy. You can additionally regulate it via the Makeblock XTool D1 application on Android and iOS.
It has a great focus mechanism. The laser crosshairs relocate as required and also relocate to the frame of the artwork. This makes the inscribing very specific. It can also be utilized to create a thickening effect, which can be useful when etching huge products.
The XTool D1 Pro has improved functions and laser power. It utilizes a 20W laser module to develop a light beam that cuts things in one pass. It can cut through 8mm black acrylic as well as 10mm basswood. It likewise has a greater speed. It can get to engraving precision of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing method on this equipment is very clever. Alongside the laser module, there is a swivelling arm which you take out when you want to concentrate the laser. It guarantees that you drop the directly the correct range from the material. Then you tighten up the thumb screw as well as swivel the arm back up. Advanced Engraving Machine
XTool D1 Special Features
Below are a few of the top Special Features of the XTool D1:
Wireless Connection
Machine can be connected via USB or a Wi-fi. As well as you can additionally control with a smart device app on Android or iOS.
Trimming and Engraving Different Materials
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is additionally a really qualified laser cutter.
Cut: Cardboard, Non-woven Material, Timber Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can cut more than 10mm thick stuff with this laser engraver. The equipment can reduce wood, particularly Poplar plywood which is soft as well as it is the preferred timber for all laser cutters.
I would prevent some plastics like PVC and vinyl given that it launches hydrogen chloride gas while being reduced. This gas is poisonous and also very corrosive (your maker will corrosion rapidly).
We have tested the machine with inscription as well as cutting various materials. You will certainly find the results of our examinations few phases lower.
The Makeblock XTool D1 has steel rollers on all axis rather than the plastic ones we have actually seen on all other equipments. This should allow for even more accuracy and less mechanical wobble when engraving at high speeds. Advanced Engraving Machine
Advanced Stepper Electric Motor Drivers
The equipment has a really sophisticated controller board. It has Trinamic stepper electric motor chauffeurs which drive the motors with a pure sine wave. By doing this the motors are really precise and quiet. The drivers likewise support homing procedure without making use of limitation switches as the chauffeurs measure present via motors as well as spot the limit by doing this. This is why this machine does not require physical limit switches over for homing.
The maker has chauffeurs for 3 axis– so you can plug in the roller system as a Z axis instead of needing to separate one of the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be regulated through Wi-Fi or USB. The laser engraver tool automatically stops if an unexpected touch takes place. This is fantastic for individuals that are worried regarding security. The device is likewise compatible with Windows and Mac OS systems.
The XTool D1 software is really easy to use. As soon as you have the artwork prepared, you can utilize the app to set up the laser. You can likewise personalize the laser settings and also create personalized artwork. The app also includes a products listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing equipment that can inscribe over 100 materials. The laser engraver tool is easy to use and includes a protective cover. The equipment has a guarantee of one year.
XTool D1 Engraving
The XTool D1 is a very versatile engraving device. It cam be used to inscribe on all sorts of products/.
Here is a checklist of products and also attributes that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an effectively considered machine. Precise, rapid and well developed. It comes at a costs rate, yet it deserves it for a person that desires a good as well as almost a commercial grade table leading laser engraver with the ability of quick cutting and also specific inscription thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The first laser engraving and also cutting maker on our listing is XTool D1 pro, the best alternative to Glowforge. It is in starting point due to the fact that it has actually gotten the Red Dot Style 2022 Award. The superior style as well as advanced technology established this maker apart from various other devices on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, as well as XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm wood board at one time, and also XTool D1-10W can cut 10mm timber board at one time.
Can XTool D1 cut leather?
XTool can cut as well as etch a massive selection of products, from something as slim as tissue paper to something as thick as leather as well as timber panels.
XTool D1 is a diode laser engraving as well as cutting maker that is compatible with a vast array of materials, consisting of different sorts of wood. Its powerful and extremely focused laser can easily reduce and inscribed wood with ultimate accuracy as well as accuracy.
Can the XTool D1 engrave alliminum?
You can additionally obtain the infrared laser component, which is especially produced steel as well as plastic engraving. It can inscribe different metals, consisting of aluminum as well as precious metals. It can likewise do tinted etching on different steels, consisting of light weight aluminum.