What is the Makeblock XTool D1? Box Engraving Machine
XTool D1 is a laser cutter that has been produced by Makeblock. Box Engraving Machine
The firm was developed in 2012 by Jasen Wang, that researched aircraft layout at Northwestern Polytechnic University. The company is committed to producing ingenious products to help people reveal themselves with development. Given that its development, Makeblock has actually released numerous educational robotics, along with a coding platform for kids. It likewise introduced the MakeX Robot Competitors.
The XTool D1 is a portable laser engraver that can cutting as well as etching a selection of materials. Its laser can cut out detailed shapes much faster than a scroll saw or jigsaw, as well as can be utilized for various projects. Along with engraving, the D1 can also be utilized for various other projects, including creating jewelry as well as light shades.
The D1 is a do it yourself set that can be constructed in just regarding half an hour. Its unit is foldable, allowing for easy transportability and reliable air flow. It is additionally constructed from flame-retardant polyester, making it risk-free from dirt particles. The enclosure likewise shields the working surface under the device.
The XTool D1 is geared up with a laser component that can engrave on steels and also lots of other materials. It has an ultra-fine pressed laser area of 0.08 x 0.08 mm. This enables finer inscription and also higher precision.
The D1 also has a high resolution of 1000 DPI, that makes it possible to etch on a wide range of products. The D1 also has a built-in mobile phone application that can be downloaded and install from the Android Shop or the Apple App Shop. The application can be utilized to import laser styles from cost-free vector sites, including Etsy. The D1 can also be attached to a computer by means of USB or WiFi. It can likewise move information by means of Wi-Fi or a big capability TF card.
The D1 can inscribing on Poplar plywood, which is among one of the most typically used woods for laser cutters. The D1 can additionally reduce on various other timbers, consisting of difficult maple, walnut, and rosewood. Its laser head is adjustable, enabling a 50mm variety. It can also process materials as much as 10mm thick, which implies that it is able to engrave on a wide variety of materials. The D1 is created for both house as well as organization use.
The XTool D1 is available in two models: the 20W version and the 5W design. The 20W variation has a larger laser head, as well as a smaller sized working location. The 5W design has a working area of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, that makes it a faster machine. Box Engraving Machine
The D1 includes a steel structure, which supplies maximum security and sturdiness. It also has a synchronous belt to boost movement precision. The belt’s modest stress is required for accuracy, specifically when relocating at broadband. The synchronous belt can additionally help the maker stay secure and also decrease resonance. It can additionally get rid of the motion space, enabling great vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most powerful diode laser on the market. It produces clear lines to 0.06 mm. This makes it an exceptional option for almost all engraving jobs. Its layout is secure and also dependable. It is optimal for small businesses as well as enthusiasts.
It can etch various kinds of metal as well as timber. It has the capability to reduce 8 to tenmm plywood in one pass. It additionally has the capability to reduce leather as well as polymer.
It comes with a variety of accessories. You can acquire the package pack that includes the Air Assist Establish and Honeycomb Working Panel. It costs $119 as well as $269, specifically. You can also obtain a 1064nm laser head. This head reduces burn marks in plastic as well as is specifically helpful for fragile fashion jewelry designs. It also has an activity sensing unit and also flame detection sensor.
It likewise features an emergency situation stop switch. It can be controlled through Wi-fi and can import laser designs from totally free vector websites like Etsy. You can additionally regulate it via the Makeblock XTool D1 application on Android and also iOS.
It has a very good emphasis mechanism. The laser crosshairs move as needed and move to the framework of the art work. This makes the inscribing extremely specific. It can also be utilized to create a thickening impact, which can be beneficial when inscribing big products.
The XTool D1 Pro has actually enhanced attributes as well as laser power. It uses a 20W laser module to develop a light beam that reduces things in one pass. It can cut through 8mm black acrylic and also 10mm basswood. It additionally has a greater rate. It can reach inscribing precision of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing method on this device is very clever. Next to the laser component, there is a swivelling arm which you pull out when you wish to concentrate the laser. It assures that you drop the head on the right range from the material. After that you tighten up the thumb screw and pivot the arm back up. Box Engraving Machine
XTool D1 Special Features
Here are a few of the leading Special Attributes of the XTool D1:
Wireless Connection
Device can be attached using USB or a WiFi. And also you can likewise regulate with a smart device application on Android or iOS.
Trimming and Engraving Different Materials
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Area Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate.
The Makeblock XTool D1 is likewise an extremely qualified laser cutter.
Cut: Cardboard, Non-woven Fabric, Timber Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can reduce greater than 10mm thick things with this laser engraver. The machine can cut timber, especially Poplar plywood which is soft as well as it is the favored timber for all laser cutters.
I would avoid some plastics like PVC as well as plastic given that it releases hydrogen chloride gas while being cut. This gas is toxic and also very corrosive (your machine will rust swiftly).
We have actually examined the device with inscription and also cutting various materials. You will certainly locate the outcomes of our examinations few chapters lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have actually seen on all other machines. This ought to enable more precision and also less mechanical wobble when etching at broadband. Box Engraving Machine
Advanced Stepper Motor Drivers
The maker has an extremely innovative controller board. It has Trinamic stepper motor motorists which drive the electric motors with a pure sine wave. This way the motors are extremely exact and also silent. The drivers also sustain homing procedure without making use of restriction changes as the drivers measure current through electric motors and detect the limit in this manner. This is why this machine does not need physical limit switches over for homing.
The equipment has drivers for 3 axis– so you can connect in the roller system as a Z axis instead of having to separate among the axis when working with a roller system.
XTool D1 Software
XTool D1 can be controlled by means of Wi-Fi or USB. The laser engraver device automatically quits if an unintentional touch takes place. This is excellent for people that are worried regarding safety and security. The tool is additionally compatible with Windows as well as Mac OS systems.
The XTool D1 software is very easy to use. When you have actually the art work prepared, you can use the application to set up the laser. You can also personalize the laser setups and develop personalized art work. The application likewise includes a products checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting machine that can etch over 100 materials. The laser engraver tool is easy to use and also comes with a safety cover. The equipment has a guarantee of 12 months.
XTool D1 Engraving
The XTool D1 is an extremely versatile etching maker. It cam be utilized to engrave on all sorts of materials/.
Here is a list of products and also attributes that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an effectively thought out maker. Accurate, fast and also sturdily developed. It comes at a costs rate, yet it deserves it for a person that wants a great and also virtually an industrial grade table top laser engraver capable of quick cutting and exact engraving thanks to an effective 10W laser component.
Is XTool better than Glowforge?
The first laser inscription and also cutting device on our listing is XTool D1 pro, the most effective option to Glowforge. It remains in top place since it has gotten the Red Dot Style 2022 Award. The exceptional layout and also advanced technology set this maker besides other machines on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, as well as XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm timber board at one time, as well as XTool D1-10W can cut 10mm wood board at once.
Can XTool D1 cut leather?
XTool can cut and also inscribe a huge range of materials, from something as slim as cells paper to something as thick as leather and timber panels.
XTool D1 is a diode laser inscription and also cutting maker that is compatible with a wide variety of materials, including various sorts of timber. Its powerful and also very concentrated laser can quickly cut and also inscribed wood with supreme accuracy as well as precision.
Can the XTool D1 engrave alliminum?
You can likewise obtain the infrared laser component, which is specifically made for steel and also plastic engraving. It can inscribe various steels, consisting of light weight aluminum and also rare-earth elements. It can likewise do tinted engraving on various steels, including aluminum.