What is the Makeblock XTool D1? Co2 Laser Acrylic Engraving Machine Supplier
XTool D1 is a laser cutter that has been created by Makeblock. Co2 Laser Acrylic Engraving Machine Supplier
The firm was developed in 2012 by Jasen Wang, that researched aircraft layout at Northwestern Polytechnic University. The business is committed to producing ingenious products to assist individuals reveal themselves through development. Since its development, Makeblock has released several educational robots, as well as a coding system for kids. It also launched the MakeX Robot Competitors.
The XTool D1 is a portable laser engraver that is capable of cutting and also etching a variety of products. Its laser can eliminate detailed shapes much faster than a scroll saw or jigsaw, and can be utilized for various tasks. In addition to engraving, the D1 can additionally be used for other projects, consisting of creating jewelry and also lamp tones.
The D1 is a DIY package that can be set up in only concerning half an hour. Its unit is foldable, allowing for easy mobility as well as reliable ventilation. It is also made from flame-retardant polyester, making it risk-free from dirt particles. The unit likewise shields the working surface area under the device.
The XTool D1 is geared up with a laser module that can engrave on steels and also many other products. It has actually an ultra-fine pressed laser area of 0.08 x 0.08 mm. This permits finer inscription and also greater accuracy.
The D1 additionally has a high resolution of 1000 DPI, which makes it possible to etch on a variety of products. The D1 likewise has a built-in smartphone app that can be downloaded from the Android Store or the Apple App Shop. The application can be utilized to import laser layouts from cost-free vector sites, including Etsy. The D1 can also be connected to a computer system through USB or WiFi. It can additionally move data through Wi-Fi or a big capability TF card.
The D1 can etching on Poplar plywood, which is just one of one of the most commonly made use of timbers for laser cutters. The D1 can likewise cut on various other timbers, including difficult maple, walnut, as well as rosewood. Its laser head is flexible, enabling a 50mm array. It can likewise refine products up to 10mm thick, which means that it has the ability to engrave on a wide range of materials. The D1 is created for both house as well as business usage.
The XTool D1 is available in 2 designs: the 20W variation and the 5W design. The 20W variation has a larger laser head, as well as a smaller working location. The 5W version has a workspace of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, that makes it a faster maker. Co2 Laser Acrylic Engraving Machine Supplier
The D1 features a steel frame, which provides optimum stability and sturdiness. It also has a simultaneous belt to enhance activity accuracy. The belt’s moderate tension is required for precision, particularly when relocating at broadband. The synchronous belt can also assist the maker remain secure and reduce vibration. It can additionally remove the motion gap, allowing for fine vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most effective diode laser on the marketplace. It generates clear lines to 0.06 mm. This makes it an excellent choice for mostly all etching tasks. Its style is safe and also dependable. It is ideal for local business and also hobbyists.
It can inscribe various kinds of metal and timber. It has the capability to reduce eight to tenmm plywood in one pass. It likewise has the capability to reduce leather and acrylic.
It features a number of devices. You can purchase the bundle pack that includes the Air Help Establish and Honeycomb Working Panel. It sets you back $119 as well as $269, specifically. You can additionally get a 1064nm laser head. This head reduces melt marks in plastic as well as is specifically helpful for delicate jewelry styles. It also has an activity sensor and also flame detection sensing unit.
It additionally includes an emergency situation stop switch. It can be controlled with Wi-fi and also can import laser designs from totally free vector websites like Etsy. You can also regulate it using the Makeblock XTool D1 app on Android and iphone.
It has an excellent focus system. The laser crosshairs move as needed as well as relocate to the structure of the art work. This makes the inscribing extremely exact. It can likewise be made use of to produce a thickening effect, which can be useful when inscribing large things.
The XTool D1 Pro has enhanced functions and laser power. It utilizes a 20W laser component to develop a beam of light that reduces things in one pass. It can puncture 8mm black acrylic as well as 10mm basswood. It likewise has a higher speed. It can get to engraving precision of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing approach on this device is really smart. Beside the laser component, there is a pivoting arm which you pull out when you want to concentrate the laser. It assures that you go down the head on the correct distance from the product. Then you tighten up the thumb screw and also swivel the arm back up. Co2 Laser Acrylic Engraving Machine Supplier
XTool D1 Special Features
Right here are a few of the top Special Attributes of the XTool D1:
Wireless Connectivity
Maker can be connected by means of USB or a WiFi. And you can likewise control with a mobile phone application on Android or iphone.
Trimming and also Engraving Different Materials
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate.
The Makeblock XTool D1 is additionally a very capable laser cutter.
Cut: Cardboard, Non-woven Material, Timber Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can reduce greater than 10mm thick stuff with this laser engraver. The machine can cut wood, specifically Poplar plywood which is soft and also it is the preferred timber for all laser cutters.
I would certainly prevent some plastics like PVC and also vinyl since it launches hydrogen chloride gas while being reduced. This gas is hazardous and extremely harsh (your equipment will corrosion promptly).
We have tested the device with inscription as well as reducing different materials. You will certainly find the results of our tests few chapters lower.
The Makeblock XTool D1 has steel rollers on all axis rather than the plastic ones we have seen on all various other equipments. This ought to enable even more accuracy and also less mechanical wobble when engraving at broadband. Co2 Laser Acrylic Engraving Machine Supplier
Advanced Stepper Electric Motor Drivers
The device has a very sophisticated controller board. It has Trinamic stepper electric motor vehicle drivers which drive the electric motors with a pure sine wave. In this manner the motors are very accurate as well as quiet. The chauffeurs also sustain homing procedure without making use of limit switches over as the drivers measure present with motors as well as identify the limit this way. This is why this equipment does not require physical limitation switches over for homing.
The device has drivers for 3 axis– so you can connect in the roller system as a Z axis instead of needing to separate among the axis when working with a roller system.
XTool D1 Software
XTool D1 can be managed through Wi-Fi or USB. The laser engraver tool instantly stops if an unintended touch occurs. This is terrific for individuals that are worried regarding safety. The device is also compatible with Windows and also Mac OS systems.
The XTool D1 software is really easy to use. As soon as you have actually the art work prepared, you can make use of the app to set up the laser. You can likewise personalize the laser settings and create custom artwork. The app also includes a products checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting machine that can etch over 100 materials. The laser engraver tool is easy to use and also comes with a protective cover. The device has a guarantee of year.
XTool D1 Engraving
The XTool D1 is a very versatile inscribing device. It cam be used to engrave on all sorts of materials/.
Here is a checklist of products as well as features that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an effectively considered maker. Accurate, rapid and also solidly constructed. It comes with a costs price, however it is worth it for somebody that wants a great as well as practically a commercial quality table leading laser engraver capable of quick cutting and specific inscription thanks to an effective 10W laser component.
Is XTool better than Glowforge?
The very first laser inscription as well as cutting maker on our list is XTool D1 pro, the very best alternative to Glowforge. It remains in first place since it has obtained the Red Dot Style 2022 Award. The superior layout and also state-of-the-art innovation established this equipment besides other makers on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, as well as XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm timber board at once, as well as XTool D1-10W can cut 10mm timber board at once.
Can XTool D1 cut leather?
XTool can reduce and also engrave a substantial selection of materials, from something as slim as tissue paper to something as thick as leather and wood panels.
XTool D1 is a diode laser inscription and also cutting device that is compatible with a large range of products, consisting of different types of wood. Its powerful and also highly concentrated laser can easily reduce as well as etched timber with utmost precision and precision.
Can the XTool D1 engrave alliminum?
You can also obtain the infrared laser module, which is specifically created steel and plastic inscription. It can engrave numerous metals, including light weight aluminum and also precious metals. It can also do colored inscribing on different steels, including aluminum.
Co2 Laser Acrylic Engraving Machine Supplier Co2 Laser Acrylic Engraving Machine Supplier