What is the Makeblock XTool D1? Dongda Ts Series Engraving Machine
XTool D1 is a laser cutter that has been developed by Makeblock. Dongda Ts Series Engraving Machine
The firm was established in 2012 by Jasen Wang, that researched airplane layout at Northwestern Polytechnic University. The company is committed to creating ingenious products to help people express themselves via development. Since its development, Makeblock has actually released several academic robots, as well as a coding system for kids. It likewise released the MakeX Robotic Competitors.
The XTool D1 is a mobile laser engraver that is capable of cutting and inscribing a range of materials. Its laser can eliminate complex forms much faster than a scroll saw or jigsaw, as well as can be made use of for several projects. Along with inscription, the D1 can also be made use of for various other tasks, consisting of producing fashion jewelry and light tones.
The D1 is a do it yourself kit that can be assembled in only about half an hour. Its room is foldable, permitting simple transportability and effective ventilation. It is additionally made of flame-retardant polyester, making it safe from dirt bits. The enclosure additionally safeguards the working surface area under the equipment.
The XTool D1 is geared up with a laser module that can engrave on steels and also several other materials. It has actually an ultra-fine compressed laser area of 0.08 x 0.08 mm. This permits finer inscription and greater accuracy.
The D1 additionally has a high resolution of 1000 DPI, which makes it feasible to inscribe on a large range of products. The D1 additionally has a built-in smart device application that can be downloaded and install from the Android Store or the Apple Application Shop. The app can be made use of to import laser styles from totally free vector sites, including Etsy. The D1 can also be connected to a computer system through USB or WiFi. It can likewise transfer information via Wi-Fi or a big capability TF card.
The D1 can engraving on Poplar plywood, which is just one of the most commonly made use of timbers for laser cutters. The D1 can additionally cut on other woods, including tough maple, walnut, as well as rosewood. Its laser head is flexible, permitting a 50mm variety. It can also process products approximately 10mm thick, which means that it is able to etch on a wide variety of products. The D1 is created for both residence and also company use.
The XTool D1 is available in two designs: the 20W version as well as the 5W version. The 20W version has a bigger laser head, and also a smaller sized working area. The 5W version has a workspace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, which makes it a faster device. Dongda Ts Series Engraving Machine
The D1 includes a steel structure, which provides maximum stability and resilience. It likewise has a synchronous belt to boost motion accuracy. The belt’s moderate tension is required for accuracy, particularly when relocating at broadband. The concurrent belt can additionally aid the device stay secure and minimize vibration. It can additionally remove the motion void, permitting great vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most powerful diode laser on the marketplace. It produces clear lines down to 0.06 mm. This makes it an excellent option for nearly all engraving tasks. Its design is secure and dependable. It is excellent for small companies and enthusiasts.
It can inscribe various kinds of steel and wood. It has the ability to cut 8 to tenmm plywood in one pass. It also has the capability to reduce leather and acrylic.
It includes a variety of accessories. You can purchase the bundle pack that includes the Air Help Set and also Honeycomb Working Panel. It sets you back $119 as well as $269, specifically. You can additionally get a 1064nm laser head. This head minimizes melt marks in plastic and also is specifically beneficial for delicate precious jewelry layouts. It also has an activity sensing unit and also fire detection sensing unit.
It likewise includes an emergency quit button. It can be managed via WiFi and can import laser designs from complimentary vector websites like Etsy. You can additionally manage it via the Makeblock XTool D1 application on Android as well as iphone.
It has a very good focus system. The laser crosshairs move as needed and also move to the structure of the art work. This makes the etching really accurate. It can also be made use of to produce a thickening impact, which can be useful when etching large things.
The XTool D1 Pro has enhanced functions as well as laser power. It utilizes a 20W laser component to produce a beam of light that cuts things in one pass. It can puncture 8mm black acrylic as well as 10mm basswood. It also has a greater speed. It can reach inscribing precision of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating technique on this maker is very clever. Alongside the laser module, there is a pivoting arm which you take out when you intend to focus the laser. It guarantees that you drop the head on the correct distance from the product. Then you tighten up the thumb screw and pivot the arm back up. Dongda Ts Series Engraving Machine
XTool D1 Special Features
Below are some of the leading Special Attributes of the XTool D1:
Wireless Connectivity
Device can be connected via USB or a WiFi. As well as you can also manage with a mobile phone app on Android or iOS.
Cutting and Inscription Different Materials
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Area Layer Steel, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Cloth, Slate.
The Makeblock XTool D1 is likewise an extremely qualified laser cutter.
Cut: Cardboard, Non-woven Textile, Timber Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can reduce greater than 10mm thick stuff with this laser engraver. The equipment can reduce timber, especially Poplar plywood which is soft and it is the recommended timber for all laser cutters.
I would stay clear of some plastics like PVC as well as plastic because it releases hydrogen chloride gas while being reduced. This gas is hazardous and extremely corrosive (your maker will certainly rust quickly).
We have examined the device with inscription and also reducing various materials. You will certainly discover the outcomes of our examinations few phases lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have actually seen on all various other equipments. This need to enable more accuracy and also much less mechanical wobble when etching at broadband. Dongda Ts Series Engraving Machine
Advanced Stepper Motor Drivers
The equipment has a really innovative controller board. It has Trinamic stepper motor vehicle drivers which drive the electric motors with a pure sine wave. This way the motors are extremely specific as well as silent. The vehicle drivers additionally sustain homing treatment without utilizing limit changes as the drivers determine current through electric motors and also find the limit this way. This is why this maker does not need physical limit changes for homing.
The device has chauffeurs for 3 axis– so you can plug in the roller system as a Z axis instead of needing to separate among the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be regulated via Wi-Fi or USB. The laser engraver tool instantly stops if an unexpected touch occurs. This is fantastic for individuals that are concerned regarding safety. The device is additionally suitable with Windows and also Mac OS systems.
The XTool D1 software program is extremely easy to use. Once you have actually the art work prepared, you can utilize the application to establish the laser. You can also tailor the laser setups and also develop customized artwork. The app additionally includes a materials checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing equipment that can engrave over 100 materials. The laser engraver device is easy to use as well as comes with a safety cover. The equipment has a service warranty of 12 months.
XTool D1 Engraving
The XTool D1 is a really functional engraving machine. It cam be made use of to etch on all types of materials/.
Below is a checklist of materials as well as attributes that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a quite possibly thought out device. Accurate, fast as well as well developed. It comes with a costs rate, yet it deserves it for a person that desires an excellent and also almost an industrial grade table leading laser engraver capable of quick cutting and specific inscription thanks to a powerful 10W laser component.
Is XTool better than Glowforge?
The very first laser inscription and also cutting maker on our checklist is XTool D1 pro, the very best choice to Glowforge. It remains in first place because it has obtained the Red Dot Layout 2022 Award. The exceptional design as well as state-of-the-art technology established this equipment besides other makers on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, and also XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm timber board at once, and also XTool D1-10W can reduce 10mm timber board at one time.
Can XTool D1 cut leather?
XTool can cut as well as inscribe a significant variety of products, from something as slim as tissue paper to something as thick as leather and timber panels.
XTool D1 is a diode laser inscription and cutting machine that works with a variety of materials, consisting of different types of timber. Its powerful as well as highly concentrated laser can quickly reduce and also inscribed wood with supreme precision as well as precision.
Can the XTool D1 engrave alliminum?
You can also obtain the infrared laser component, which is particularly made for steel and also plastic engraving. It can engrave various steels, consisting of aluminum as well as precious metals. It can likewise do colored inscribing on different steels, consisting of light weight aluminum.
Dongda Ts Series Engraving Machine Dongda Ts Series Engraving Machine