What is the Makeblock XTool D1? Fiber Laser Cutting Machine For Pipe / Tube
XTool D1 is a laser cutter that has been created by Makeblock. Fiber Laser Cutting Machine For Pipe / Tube
The firm was developed in 2012 by Jasen Wang, that researched aircraft layout at Northwestern Polytechnic University. The firm is dedicated to developing cutting-edge products to help people express themselves with development. Because its development, Makeblock has launched a number of educational robots, as well as a coding system for youngsters. It additionally released the MakeX Robot Competition.
The XTool D1 is a portable laser engraver that can cutting and inscribing a variety of materials. Its laser can remove complex shapes much faster than a scroll saw or jigsaw, and also can be used for many different projects. In addition to inscription, the D1 can likewise be used for various other projects, including developing precious jewelry and lamp tones.
The D1 is a do it yourself kit that can be assembled in only about half a hr. Its unit is collapsible, allowing for simple portability as well as reliable air flow. It is additionally made from flame-retardant polyester, making it risk-free from dirt particles. The enclosure also shields the functioning surface area under the maker.
The XTool D1 is outfitted with a laser module that can engrave on steels as well as lots of various other products. It has an ultra-fine pressed laser area of 0.08 x 0.08 mm. This permits finer inscription as well as greater precision.
The D1 likewise has a high resolution of 1000 DPI, which makes it feasible to inscribe on a large range of products. The D1 additionally has a built-in mobile phone application that can be downloaded and install from the Android Shop or the Apple Application Shop. The application can be used to import laser layouts from complimentary vector sites, including Etsy. The D1 can likewise be linked to a computer system through USB or WiFi. It can likewise move data using Wi-Fi or a huge ability TF card.
The D1 is capable of inscribing on Poplar plywood, which is one of one of the most typically used woods for laser cutters. The D1 can also cut on other timbers, consisting of hard maple, walnut, and rosewood. Its laser head is adjustable, permitting a 50mm variety. It can additionally refine products approximately 10mm thick, which indicates that it is able to etch on a wide variety of materials. The D1 is created for both residence and also company use.
The XTool D1 can be found in two versions: the 20W version and also the 5W design. The 20W version has a bigger laser head, as well as a smaller working location. The 5W design has a workspace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a faster device. Fiber Laser Cutting Machine For Pipe / Tube
The D1 features a steel frame, which offers optimum stability as well as resilience. It likewise has a simultaneous belt to improve activity precision. The belt’s moderate tension is required for accuracy, particularly when relocating at high speeds. The concurrent belt can also aid the maker stay secure as well as lessen resonance. It can additionally get rid of the movement gap, enabling fine vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most effective diode laser on the market. It generates clear lines to 0.06 mm. This makes it an excellent option for almost all etching tasks. Its style is safe and also dependable. It is perfect for local business as well as hobbyists.
It can inscribe different types of steel and also timber. It has the capacity to reduce eight to tenmm plywood in one pass. It additionally has the capacity to reduce leather and acrylic.
It features a number of devices. You can acquire the package pack that consists of the Air Assist Establish as well as Honeycomb Working Panel. It costs $119 and $269, specifically. You can likewise get a 1064nm laser head. This head minimizes shed marks in plastic and is particularly helpful for fragile fashion jewelry designs. It additionally has a movement sensor as well as fire discovery sensor.
It additionally features an emergency situation quit button. It can be regulated through Wi-fi and also can import laser styles from cost-free vector sites like Etsy. You can also control it by means of the Makeblock XTool D1 application on Android and iphone.
It has an excellent focus mechanism. The laser crosshairs relocate as needed and relocate to the frame of the art work. This makes the inscribing extremely precise. It can additionally be utilized to create a thickening impact, which can be beneficial when engraving huge products.
The XTool D1 Pro has actually boosted features as well as laser power. It uses a 20W laser component to produce a beam that reduces objects in one pass. It can puncture 8mm black acrylic and also 10mm basswood. It additionally has a greater rate. It can reach engraving precision of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating approach on this machine is extremely brilliant. Beside the laser component, there is a swivelling arm which you take out when you wish to focus the laser. It guarantees that you drop the directly the proper range from the product. After that you tighten the thumb screw and also swivel the arm back up. Fiber Laser Cutting Machine For Pipe / Tube
XTool D1 Special Features
Here are a few of the top Special Attributes of the XTool D1:
Wireless Connectivity
Device can be connected via USB or a Wi-fi. And also you can likewise manage with a mobile phone application on Android or iphone.
Cutting and Engraving Different Products
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Area Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate.
The Makeblock XTool D1 is likewise a really capable laser cutter.
Cut: Cardboard, Non-woven Textile, Wood Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can reduce greater than 10mm thick stuff with this laser engraver. The equipment can reduce timber, especially Poplar plywood which is soft as well as it is the recommended wood for all laser cutters.
I would avoid some plastics like PVC and also vinyl given that it launches hydrogen chloride gas while being reduced. This gas is hazardous as well as really corrosive (your device will corrosion swiftly).
We have actually examined the equipment with engraving and reducing different materials. You will certainly locate the outcomes of our tests couple of phases lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have actually seen on all other devices. This must allow for even more accuracy and much less mechanical wobble when inscribing at high speeds. Fiber Laser Cutting Machine For Pipe / Tube
Advanced Stepper Electric Motor Drivers
The machine has an extremely sophisticated controller board. It has Trinamic stepper electric motor motorists which drive the motors with a pure sine wave. By doing this the electric motors are very precise as well as quiet. The drivers additionally sustain homing procedure without making use of limit switches as the vehicle drivers measure present with electric motors and also spot the limit by doing this. This is why this machine does not need physical limit switches for homing.
The device has vehicle drivers for 3 axis– so you can plug in the roller system as a Z axis instead of having to disconnect one of the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be managed by means of Wi-Fi or USB. The laser engraver tool instantly stops if an accidental touch occurs. This is fantastic for people who are concerned regarding security. The device is likewise compatible with Windows and also Mac OS systems.
The XTool D1 software application is very easy to use. Once you have the art work prepared, you can utilize the application to set up the laser. You can additionally personalize the laser setups and create personalized artwork. The application likewise consists of a products list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing device that can engrave over 100 materials. The laser engraver device is easy to use and also comes with a protective cover. The equipment has a guarantee of year.
XTool D1 Engraving
The XTool D1 is an extremely flexible engraving machine. It cam be used to inscribe on all types of products/.
Here is a list of products and functions that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a very well thought out maker. Exact, rapid as well as solidly built. It comes at a premium cost, but it is worth it for someone that wants a great and also practically an industrial quality table leading laser engraver capable of fast cutting and precise engraving thanks to an effective 10W laser component.
Is XTool better than Glowforge?
The initial laser engraving and also reducing maker on our listing is XTool D1 pro, the best alternative to Glowforge. It is in starting point since it has actually received the Red Dot Layout 2022 Award. The exceptional style and also advanced innovation set this equipment besides other devices on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, as well as XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm timber board at one time, and also XTool D1-10W can cut 10mm timber board at one time.
Can XTool D1 cut leather?
XTool can reduce as well as engrave a substantial selection of products, from something as slim as cells paper to something as thick as leather as well as wood panels.
XTool D1 is a diode laser inscription and reducing device that works with a wide range of materials, consisting of various types of timber. Its effective and extremely focused laser can conveniently reduce and also inscribed wood with utmost precision and also accuracy.
Can the XTool D1 engrave alliminum?
You can additionally obtain the infrared laser module, which is especially created steel and plastic engraving. It can engrave numerous metals, including aluminum as well as rare-earth elements. It can additionally do colored engraving on numerous metals, including light weight aluminum.
Fiber Laser Cutting Machine For Pipe / Tube Fiber Laser Cutting Machine For Pipe / Tube