What is the Makeblock XTool D1? Fiber Laser Cutting Metal Machine
XTool D1 is a laser cutter that has been produced by Makeblock. Fiber Laser Cutting Metal Machine
The business was developed in 2012 by Jasen Wang, who researched airplane design at Northwestern Polytechnic University. The business is dedicated to developing ingenious products to help individuals share themselves with creation. Since its development, Makeblock has actually launched a number of instructional robots, as well as a coding system for children. It also introduced the MakeX Robot Competitors.
The XTool D1 is a mobile laser engraver that is capable of cutting and engraving a range of materials. Its laser can remove elaborate forms much faster than a scroll saw or jigsaw, as well as can be utilized for many different jobs. Along with inscription, the D1 can also be used for various other jobs, consisting of creating jewelry and also lamp tones.
The D1 is a DIY kit that can be assembled in only regarding half a hr. Its unit is foldable, allowing for easy transportability and efficient ventilation. It is additionally made from flame-retardant polyester, making it secure from dirt particles. The unit also secures the working surface under the machine.
The XTool D1 is outfitted with a laser component that is capable of engrave on steels and also numerous other products. It has actually an ultra-fine compressed laser place of 0.08 x 0.08 mm. This enables finer engraving as well as greater accuracy.
The D1 also has a high resolution of 1000 DPI, which makes it feasible to etch on a variety of products. The D1 additionally has an integrated smart device application that can be downloaded and install from the Android Shop or the Apple App Shop. The app can be made use of to import laser styles from cost-free vector sites, including Etsy. The D1 can likewise be connected to a computer system by means of USB or WiFi. It can likewise transfer information through Wi-Fi or a large ability TF card.
The D1 is capable of engraving on Poplar plywood, which is one of the most commonly made use of woods for laser cutters. The D1 can additionally reduce on various other timbers, consisting of tough maple, walnut, and rosewood. Its laser head is adjustable, permitting a 50mm array. It can likewise process materials as much as 10mm thick, which suggests that it is able to etch on a variety of materials. The D1 is made for both residence and company usage.
The XTool D1 comes in 2 versions: the 20W variation as well as the 5W model. The 20W version has a bigger laser head, as well as a smaller sized working location. The 5W design has a workplace of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, which makes it a quicker device. Fiber Laser Cutting Metal Machine
The D1 includes a steel structure, which supplies maximum stability as well as longevity. It likewise has a synchronous belt to enhance movement precision. The belt’s modest tension is needed for precision, especially when relocating at high speeds. The simultaneous belt can additionally aid the equipment stay secure and minimize vibration. It can additionally eliminate the motion void, allowing for great vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most effective diode laser on the market. It creates clear lines to 0.06 mm. This makes it an exceptional selection for almost all inscribing tasks. Its layout is safe and trustworthy. It is suitable for local business and also enthusiasts.
It can inscribe different sorts of steel and also timber. It has the capability to cut 8 to tenmm plywood in one pass. It also has the ability to cut leather as well as polymer.
It comes with a variety of devices. You can purchase the package pack that includes the Air Help Set and Honeycomb Working Panel. It costs $119 and $269, specifically. You can likewise get a 1064nm laser head. This head reduces burn marks in plastic and also is specifically useful for fragile fashion jewelry styles. It likewise has a motion sensor and also flame detection sensing unit.
It additionally features an emergency stop button. It can be managed with Wi-fi and also can import laser layouts from totally free vector websites like Etsy. You can additionally control it via the Makeblock XTool D1 application on Android as well as iphone.
It has a very good focus system. The laser crosshairs move as needed and transfer to the framework of the art work. This makes the etching very specific. It can likewise be used to create a thickening impact, which can be helpful when etching big things.
The XTool D1 Pro has actually enhanced attributes and laser power. It utilizes a 20W laser component to produce a light beam that reduces objects in one pass. It can puncture 8mm black acrylic as well as 10mm basswood. It additionally has a greater rate. It can reach engraving accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating technique on this machine is extremely smart. Beside the laser component, there is a swivelling arm which you take out when you intend to focus the laser. It guarantees that you go down the head on the correct distance from the material. Then you tighten the thumb screw and also rotate the arm back up. Fiber Laser Cutting Metal Machine
XTool D1 Special Features
Right here are a few of the leading Unique Features of the XTool D1:
Wireless Connection
Machine can be connected through USB or a Wi-fi. And you can also control with a mobile phone application on Android or iphone.
Trimming and Engraving Different Materials
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Area Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is likewise a very capable laser cutter.
Cut: Cardboard, Non-woven Material, Wood Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can reduce more than 10mm thick stuff with this laser engraver. The machine can reduce timber, particularly Poplar plywood which is soft and it is the recommended wood for all laser cutters.
I would certainly avoid some plastics like PVC as well as vinyl because it launches hydrogen chloride gas while being cut. This gas is hazardous and also extremely corrosive (your equipment will certainly rust rapidly).
We have actually examined the machine with engraving and also reducing various products. You will discover the outcomes of our tests couple of chapters lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have actually seen on all various other machines. This need to allow for even more accuracy as well as much less mechanical wobble when engraving at broadband. Fiber Laser Cutting Metal Machine
Advanced Stepper Electric Motor Drivers
The device has an extremely sophisticated controller board. It has Trinamic stepper electric motor motorists which drive the electric motors with a pure sine wave. This way the motors are really accurate and silent. The chauffeurs additionally sustain homing treatment without utilizing limit switches over as the vehicle drivers gauge present via motors and detect the limit in this manner. This is why this maker does not need physical restriction switches for homing.
The equipment has motorists for 3 axis– so you can plug in the roller system as a Z axis as opposed to having to disconnect among the axis when working with a roller system.
XTool D1 Software
XTool D1 can be controlled using Wi-Fi or USB. The laser engraver tool automatically stops if an accidental touch happens. This is terrific for people that are worried about safety and security. The device is also compatible with Windows as well as Mac OS systems.
The XTool D1 software is very easy to use. As soon as you have actually the art work prepared, you can make use of the application to set up the laser. You can additionally tailor the laser settings and also develop custom-made art work. The app likewise includes a materials checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing equipment that can inscribe over 100 products. The laser engraver tool is easy to use and also comes with a safety cover. The maker has a service warranty of twelve month.
XTool D1 Engraving
The XTool D1 is a very versatile inscribing device. It cam be used to etch on all types of materials/.
Right here is a listing of products and also features that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a quite possibly thought out device. Precise, quick as well as solidly built. It comes at a costs price, yet it is worth it for a person that wants a great and also virtually a commercial grade table top laser engraver efficient in quick cutting and also specific inscription thanks to an effective 10W laser component.
Is XTool better than Glowforge?
The first laser engraving and also reducing maker on our checklist is XTool D1 pro, the best choice to Glowforge. It is in starting point due to the fact that it has gotten the Red Dot Style 2022 Award. The outstanding layout and advanced modern technology set this device besides various other devices on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, and also XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm timber board at one time, and also XTool D1-10W can cut 10mm timber board at one time.
Can XTool D1 cut leather?
XTool can cut and also inscribe a massive range of materials, from something as slim as tissue paper to something as thick as natural leather and timber panels.
XTool D1 is a diode laser engraving and cutting device that is compatible with a vast array of materials, consisting of different kinds of timber. Its effective and extremely focused laser can easily cut as well as inscribed wood with ultimate precision as well as accuracy.
Can the XTool D1 engrave alliminum?
You can additionally get the infrared laser component, which is especially produced metal as well as plastic engraving. It can inscribe numerous metals, consisting of aluminum and rare-earth elements. It can additionally do tinted inscribing on various steels, consisting of aluminum.
Fiber Laser Cutting Metal Machine Fiber Laser Cutting Metal Machine