What is the Makeblock XTool D1? G-weike Fiber Lasers Engraving Machine
XTool D1 is a laser cutter that has been developed by Makeblock. G-weike Fiber Lasers Engraving Machine
The company was established in 2012 by Jasen Wang, that studied airplane design at Northwestern Polytechnic College. The company is dedicated to developing innovative products to assist individuals express themselves through development. Since its production, Makeblock has released several educational robotics, along with a coding platform for youngsters. It likewise released the MakeX Robotic Competition.
The XTool D1 is a mobile laser engraver that is capable of reducing and also inscribing a selection of products. Its laser can eliminate complex forms much faster than a scroll saw or jigsaw, and can be utilized for several jobs. Along with inscription, the D1 can also be utilized for other tasks, consisting of creating jewelry and light shades.
The D1 is a DIY package that can be put together in just about half a hr. Its room is collapsible, permitting simple portability and reliable air flow. It is also made of flame-retardant polyester, making it risk-free from dust particles. The enclosure likewise shields the working surface under the machine.
The XTool D1 is equipped with a laser component that is capable of engrave on steels and many other products. It has an ultra-fine compressed laser spot of 0.08 x 0.08 mm. This allows for finer engraving and higher accuracy.
The D1 additionally has a high resolution of 1000 DPI, which makes it possible to engrave on a vast array of products. The D1 likewise has a built-in mobile phone app that can be downloaded from the Android Store or the Apple Application Store. The app can be used to import laser styles from complimentary vector sites, consisting of Etsy. The D1 can additionally be connected to a computer system using USB or WiFi. It can also move information via Wi-Fi or a big capacity TF card.
The D1 can inscribing on Poplar plywood, which is among the most frequently used woods for laser cutters. The D1 can additionally cut on various other timbers, including tough maple, walnut, and also rosewood. Its laser head is adjustable, allowing for a 50mm array. It can likewise process materials as much as 10mm thick, which implies that it has the ability to etch on a wide range of materials. The D1 is created for both home and organization use.
The XTool D1 is available in 2 models: the 20W variation as well as the 5W design. The 20W variation has a larger laser head, and a smaller sized working area. The 5W model has a workspace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, which makes it a faster device. G-weike Fiber Lasers Engraving Machine
The D1 features a steel structure, which provides maximum stability as well as longevity. It additionally has a simultaneous belt to boost motion accuracy. The belt’s modest stress is needed for accuracy, specifically when moving at broadband. The synchronous belt can additionally aid the maker remain secure as well as lessen resonance. It can likewise eliminate the activity gap, permitting great vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most effective diode laser on the market. It produces clear lines down to 0.06 mm. This makes it a superb selection for mostly all etching tasks. Its layout is safe as well as dependable. It is optimal for small businesses and hobbyists.
It can inscribe various sorts of metal and also wood. It has the ability to reduce eight to tenmm plywood in one pass. It also has the ability to cut natural leather and acrylic.
It includes a number of accessories. You can acquire the package pack that includes the Air Assist Set and Honeycomb Working Panel. It sets you back $119 as well as $269, specifically. You can likewise get a 1064nm laser head. This head decreases melt marks in plastic and also is specifically useful for fragile jewelry layouts. It also has a motion sensing unit as well as fire discovery sensor.
It also features an emergency situation quit button. It can be managed with Wi-fi and also can import laser styles from free vector sites like Etsy. You can also control it via the Makeblock XTool D1 application on Android and also iphone.
It has a very good emphasis system. The laser crosshairs move as needed and move to the structure of the art work. This makes the engraving extremely specific. It can also be made use of to develop a thickening result, which can be beneficial when engraving huge products.
The XTool D1 Pro has enhanced features and also laser power. It utilizes a 20W laser module to produce a light beam that cuts items in one pass. It can cut through 8mm black acrylic and also 10mm basswood. It additionally has a higher speed. It can reach etching precision of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing technique on this machine is very smart. Beside the laser module, there is a rotating arm which you pull out when you intend to focus the laser. It ensures that you drop the head on the correct range from the material. After that you tighten up the thumb screw as well as swivel the arm back up. G-weike Fiber Lasers Engraving Machine
XTool D1 Special Features
Right here are a few of the top Special Features of the XTool D1:
Wireless Connection
Device can be linked through USB or a Wi-fi. As well as you can also regulate with a mobile phone application on Android or iphone.
Trimming and also Inscription Different Products
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is additionally a really qualified laser cutter.
Cut: Cardboard, Non-woven Textile, Timber Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can cut greater than 10mm thick stuff with this laser engraver. The device can reduce timber, especially Poplar plywood which is soft and also it is the preferred wood for all laser cutters.
I would certainly stay clear of some plastics like PVC as well as plastic because it releases hydrogen chloride gas while being reduced. This gas is hazardous as well as really destructive (your machine will certainly rust quickly).
We have actually checked the machine with engraving and cutting various materials. You will locate the results of our examinations couple of phases lower.
The Makeblock XTool D1 has steel rollers on all axis rather than the plastic ones we have seen on all various other equipments. This should permit even more precision and also much less mechanical wobble when inscribing at high speeds. G-weike Fiber Lasers Engraving Machine
Advanced Stepper Motor Drivers
The maker has an extremely advanced controller board. It has Trinamic stepper motor drivers which drive the electric motors with a pure sine wave. In this manner the electric motors are extremely specific and silent. The motorists likewise sustain homing procedure without utilizing limitation switches as the motorists gauge present with electric motors and also discover the limit by doing this. This is why this maker does not require physical restriction switches for homing.
The device has drivers for 3 axis– so you can connect in the roller system as a Z axis instead of having to separate among the axis when working with a roller system.
XTool D1 Software
XTool D1 can be controlled through Wi-Fi or USB. The laser engraver device instantly quits if an unexpected touch occurs. This is great for people that are worried regarding security. The device is also compatible with Windows and Mac OS systems.
The XTool D1 software program is extremely easy to use. Once you have actually the art work prepared, you can use the application to establish the laser. You can likewise personalize the laser setups and also produce personalized art work. The app likewise includes a materials list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting device that can inscribe over 100 materials. The laser engraver tool is easy to use as well as includes a protective cover. The maker has a guarantee of year.
XTool D1 Engraving
The XTool D1 is a very flexible inscribing equipment. It cam be used to inscribe on all sorts of products/.
Right here is a listing of materials and functions that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a quite possibly thought out device. Specific, fast as well as solidly constructed. It comes at a premium price, yet it deserves it for somebody that desires an excellent as well as virtually an industrial grade table top laser engraver with the ability of rapid cutting and also exact inscription thanks to a powerful 10W laser module.
Is XTool better than Glowforge?
The very first laser engraving and also cutting maker on our listing is XTool D1 pro, the most effective option to Glowforge. It remains in starting point because it has actually gotten the Red Dot Design 2022 Award. The exceptional style and also cutting edge innovation set this device aside from other machines on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, and also XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm wood board at one time, and also XTool D1-10W can reduce 10mm wood board at once.
Can XTool D1 cut leather?
XTool can cut as well as etch a substantial selection of products, from something as slim as tissue paper to something as thick as natural leather and timber panels.
XTool D1 is a diode laser inscription and also cutting device that works with a variety of materials, including various kinds of timber. Its effective and also very focused laser can easily cut as well as engraved timber with ultimate precision as well as precision.
Can the XTool D1 engrave alliminum?
You can additionally obtain the infrared laser module, which is specifically produced steel and also plastic inscription. It can inscribe various metals, consisting of aluminum and precious metals. It can likewise do tinted engraving on numerous steels, including aluminum.
G-weike Fiber Lasers Engraving Machine G-weike Fiber Lasers Engraving Machine