What is the Makeblock XTool D1? Gold Jewellery Engraving Machine
XTool D1 is a laser cutter that has been developed by Makeblock. Gold Jewellery Engraving Machine
The firm was established in 2012 by Jasen Wang, that studied aircraft layout at Northwestern Polytechnic University. The firm is dedicated to developing cutting-edge items to aid people share themselves via production. Because its development, Makeblock has launched several educational robotics, in addition to a coding system for children. It likewise launched the MakeX Robot Competition.
The XTool D1 is a mobile laser engraver that can cutting as well as inscribing a variety of materials. Its laser can cut out elaborate forms much faster than a scroll saw or jigsaw, and also can be utilized for several tasks. Along with inscription, the D1 can likewise be utilized for other tasks, including producing jewelry as well as lamp shades.
The D1 is a DIY kit that can be set up in just concerning half an hour. Its enclosure is foldable, allowing for very easy transportability and also effective air flow. It is additionally made from flame-retardant polyester, making it safe from dust fragments. The enclosure additionally protects the working surface under the machine.
The XTool D1 is geared up with a laser module that is capable of engrave on steels as well as numerous other materials. It has actually an ultra-fine pressed laser spot of 0.08 x 0.08 mm. This allows for finer inscription as well as greater precision.
The D1 also has a high resolution of 1000 DPI, that makes it possible to engrave on a wide variety of materials. The D1 likewise has a built-in mobile phone app that can be downloaded and install from the Android Shop or the Apple App Shop. The app can be used to import laser designs from complimentary vector websites, including Etsy. The D1 can also be attached to a computer through USB or WiFi. It can likewise transfer information by means of Wi-Fi or a huge ability TF card.
The D1 can etching on Poplar plywood, which is among the most typically used timbers for laser cutters. The D1 can additionally cut on various other timbers, consisting of hard maple, walnut, and rosewood. Its laser head is adjustable, allowing for a 50mm range. It can additionally process products approximately 10mm thick, which suggests that it has the ability to inscribe on a wide range of products. The D1 is developed for both house and company use.
The XTool D1 comes in two versions: the 20W variation and the 5W design. The 20W variation has a bigger laser head, and a smaller working location. The 5W model has a workplace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, which makes it a much faster equipment. Gold Jewellery Engraving Machine
The D1 features a steel framework, which provides optimum security and longevity. It likewise has a simultaneous belt to enhance activity accuracy. The belt’s moderate stress is needed for accuracy, particularly when moving at high speeds. The concurrent belt can additionally assist the equipment stay steady as well as decrease resonance. It can also eliminate the movement space, permitting great vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most effective diode laser on the market. It produces clear lines down to 0.06 mm. This makes it a superb selection for mostly all inscribing tasks. Its style is risk-free as well as reliable. It is excellent for local business as well as enthusiasts.
It can inscribe different sorts of steel as well as timber. It has the ability to reduce 8 to tenmm plywood in one pass. It likewise has the ability to cut leather and also polymer.
It includes a variety of devices. You can get the bundle pack that consists of the Air Assist Establish and Honeycomb Working Panel. It costs $119 as well as $269, specifically. You can also get a 1064nm laser head. This head minimizes shed marks in plastic and also is specifically helpful for fragile precious jewelry styles. It likewise has a motion sensor and also flame discovery sensing unit.
It likewise includes an emergency situation quit switch. It can be managed through WiFi and can import laser styles from totally free vector sites like Etsy. You can also manage it via the Makeblock XTool D1 application on Android as well as iphone.
It has a very good focus system. The laser crosshairs move as needed and move to the structure of the artwork. This makes the etching extremely accurate. It can also be made use of to develop a thickening effect, which can be helpful when etching big items.
The XTool D1 Pro has actually enhanced attributes and laser power. It utilizes a 20W laser module to develop a beam that reduces objects in one pass. It can puncture 8mm black acrylic and also 10mm basswood. It likewise has a higher speed. It can get to engraving precision of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing method on this device is extremely smart. Next to the laser component, there is a pivoting arm which you pull out when you wish to concentrate the laser. It guarantees that you go down the directly the appropriate range from the material. Then you tighten the thumb screw and also swivel the arm back up. Gold Jewellery Engraving Machine
XTool D1 Special Features
Right here are some of the top Special Features of the XTool D1:
Wireless Connectivity
Maker can be linked via USB or a WiFi. And you can additionally manage with a mobile phone application on Android or iphone.
Trimming as well as Engraving Different Materials
Engrave: Timber, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Area Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is likewise a really capable laser cutter.
Cut: Cardboard, Non-woven Material, Timber Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can cut greater than 10mm thick stuff with this laser engraver. The equipment can reduce wood, especially Poplar plywood which is soft and it is the favored timber for all laser cutters.
I would certainly stay clear of some plastics like PVC and also vinyl given that it launches hydrogen chloride gas while being cut. This gas is hazardous as well as very corrosive (your equipment will rust promptly).
We have actually examined the machine with inscription and also cutting different products. You will certainly locate the results of our tests couple of chapters lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have seen on all various other equipments. This should permit more precision and also much less mechanical wobble when inscribing at broadband. Gold Jewellery Engraving Machine
Advanced Stepper Motor Drivers
The equipment has a really advanced controller board. It has Trinamic stepper motor motorists which drive the motors with a pure sine wave. In this manner the electric motors are very precise and also quiet. The chauffeurs likewise support homing treatment without utilizing limitation switches as the motorists gauge present via motors and also identify the limit this way. This is why this machine does not need physical limit switches over for homing.
The equipment has vehicle drivers for 3 axis– so you can connect in the roller system as a Z axis rather than having to disconnect among the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be regulated via Wi-Fi or USB. The laser engraver tool instantly quits if an unexpected touch takes place. This is excellent for people that are worried regarding safety and security. The tool is also compatible with Windows and also Mac OS systems.
The XTool D1 software application is very easy to use. Once you have actually the artwork prepared, you can utilize the application to set up the laser. You can likewise customize the laser settings and also produce customized art work. The app additionally includes a materials list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing device that can etch over 100 materials. The laser engraver tool is easy to use and also comes with a safety cover. The device has a service warranty of one year.
XTool D1 Engraving
The XTool D1 is a really functional inscribing machine. It cam be utilized to engrave on all types of products/.
Below is a listing of materials as well as attributes that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an effectively thought out machine. Precise, quick and also well constructed. It comes with a premium cost, however it deserves it for a person that desires a great as well as almost an industrial grade table leading laser engraver with the ability of quick cutting as well as precise inscription thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The very first laser inscription and cutting maker on our listing is XTool D1 pro, the very best option to Glowforge. It is in starting point since it has obtained the Red Dot Design 2022 Award. The superior style and also state-of-the-art modern technology set this maker apart from various other machines on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, and XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm timber board at one time, and also XTool D1-10W can reduce 10mm wood board at once.
Can XTool D1 cut leather?
XTool can cut as well as engrave a massive range of materials, from something as slim as cells paper to something as thick as natural leather and wood panels.
XTool D1 is a diode laser inscription as well as cutting device that is compatible with a large range of products, consisting of different kinds of wood. Its powerful and also very focused laser can quickly reduce and also engraved timber with best accuracy and also precision.
Can the XTool D1 engrave alliminum?
You can also obtain the infrared laser module, which is especially produced steel and plastic engraving. It can engrave different steels, including light weight aluminum and also precious metals. It can also do tinted etching on numerous metals, including light weight aluminum.
Gold Jewellery Engraving Machine Gold Jewellery Engraving Machine