What is the Makeblock XTool D1? High Quality Metal-non Metal Laser Cutting Machine Factories
XTool D1 is a laser cutter that has actually been produced by Makeblock. High Quality Metal-non Metal Laser Cutting Machine Factories
The firm was developed in 2012 by Jasen Wang, who examined airplane layout at Northwestern Polytechnic College. The firm is dedicated to creating innovative products to help individuals share themselves with development. Because its production, Makeblock has actually launched a number of academic robots, in addition to a coding platform for kids. It likewise released the MakeX Robotic Competitors.
The XTool D1 is a portable laser engraver that can cutting and etching a variety of materials. Its laser can remove elaborate forms much faster than a scroll saw or jigsaw, and also can be used for various jobs. Along with engraving, the D1 can additionally be made use of for other jobs, consisting of creating fashion jewelry and also light shades.
The D1 is a DIY set that can be assembled in just concerning half a hr. Its enclosure is foldable, permitting simple mobility and also efficient ventilation. It is likewise constructed from flame-retardant polyester, making it secure from dirt particles. The room likewise shields the working surface under the equipment.
The XTool D1 is furnished with a laser component that can engrave on metals and lots of various other materials. It has an ultra-fine pressed laser place of 0.08 x 0.08 mm. This permits finer engraving and also higher accuracy.
The D1 also has a high resolution of 1000 DPI, that makes it feasible to etch on a variety of materials. The D1 additionally has a built-in smartphone application that can be downloaded and install from the Android Store or the Apple App Shop. The application can be utilized to import laser layouts from cost-free vector sites, consisting of Etsy. The D1 can also be linked to a computer via USB or WiFi. It can likewise transfer information via Wi-Fi or a huge ability TF card.
The D1 can etching on Poplar plywood, which is among the most commonly made use of woods for laser cutters. The D1 can additionally reduce on various other timbers, including tough maple, walnut, and also rosewood. Its laser head is flexible, permitting a 50mm variety. It can additionally refine products up to 10mm thick, which indicates that it is able to inscribe on a wide array of materials. The D1 is made for both residence as well as organization use.
The XTool D1 is available in two models: the 20W variation and also the 5W model. The 20W variation has a bigger laser head, and also a smaller sized working area. The 5W version has a working area of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, which makes it a much faster machine. High Quality Metal-non Metal Laser Cutting Machine Factories
The D1 includes a steel frame, which gives maximum security as well as durability. It likewise has a simultaneous belt to boost motion accuracy. The belt’s modest tension is needed for precision, specifically when moving at broadband. The simultaneous belt can additionally help the machine remain steady as well as minimize resonance. It can also remove the activity gap, allowing for great vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most powerful diode laser on the market. It creates clear lines down to 0.06 mm. This makes it a superb choice for nearly all inscribing tasks. Its layout is secure and also reliable. It is ideal for small companies as well as hobbyists.
It can inscribe various types of steel as well as timber. It has the capability to cut eight to tenmm plywood in one pass. It also has the capability to reduce natural leather and polymer.
It features a variety of devices. You can get the package pack that includes the Air Help Set and Honeycomb Working Panel. It costs $119 and also $269, respectively. You can likewise obtain a 1064nm laser head. This head reduces burn marks in plastic and is specifically valuable for delicate fashion jewelry designs. It also has a motion sensing unit and flame detection sensing unit.
It also includes an emergency quit switch. It can be controlled via Wi-fi and can import laser designs from cost-free vector websites like Etsy. You can additionally control it using the Makeblock XTool D1 application on Android as well as iOS.
It has an excellent emphasis system. The laser crosshairs relocate as required and also relocate to the structure of the art work. This makes the etching extremely specific. It can likewise be utilized to create a thickening result, which can be beneficial when engraving big products.
The XTool D1 Pro has enhanced features and laser power. It uses a 20W laser component to develop a beam of light that reduces things in one pass. It can puncture 8mm black acrylic as well as 10mm basswood. It likewise has a higher speed. It can get to etching precision of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing technique on this device is really clever. Next to the laser module, there is a swivelling arm which you pull out when you wish to focus the laser. It assures that you go down the head on the proper range from the material. After that you tighten up the thumb screw and also pivot the arm back up. High Quality Metal-non Metal Laser Cutting Machine Factories
XTool D1 Special Features
Right here are some of the top Special Attributes of the XTool D1:
Wireless Connection
Device can be attached via USB or a Wi-fi. And you can also regulate with a mobile phone application on Android or iphone.
Cutting and Engraving Different Materials
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is additionally a very capable laser cutter.
Cut: Cardboard, Non-woven Textile, Wood Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can reduce more than 10mm thick things with this laser engraver. The equipment can cut wood, particularly Poplar plywood which is soft as well as it is the preferred timber for all laser cutters.
I would stay clear of some plastics like PVC as well as plastic since it releases hydrogen chloride gas while being cut. This gas is toxic and really destructive (your equipment will rust quickly).
We have checked the maker with engraving and cutting various materials. You will certainly locate the outcomes of our tests couple of chapters lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have actually seen on all other equipments. This must enable more accuracy and also less mechanical wobble when inscribing at broadband. High Quality Metal-non Metal Laser Cutting Machine Factories
Advanced Stepper Motor Drivers
The equipment has a really sophisticated controller board. It has Trinamic stepper electric motor chauffeurs which drive the electric motors with a pure sine wave. In this manner the electric motors are extremely exact and silent. The drivers likewise sustain homing treatment without utilizing restriction changes as the chauffeurs gauge current through motors and also find the limit this way. This is why this device does not need physical limitation changes for homing.
The machine has vehicle drivers for 3 axis– so you can connect in the roller system as a Z axis as opposed to having to detach among the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be controlled using Wi-Fi or USB. The laser engraver device immediately stops if an unintentional touch happens. This is great for people who are worried about security. The tool is also suitable with Windows and also Mac OS systems.
The XTool D1 software program is very easy to use. Once you have actually the art work prepared, you can utilize the app to set up the laser. You can also personalize the laser setups as well as create personalized artwork. The app also consists of a products list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting machine that can etch over 100 materials. The laser engraver tool is easy to use and includes a protective cover. The maker has a warranty of 12 months.
XTool D1 Engraving
The XTool D1 is a very flexible engraving device. It cam be used to engrave on all kinds of products/.
Below is a listing of materials and features that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an effectively considered maker. Exact, quick as well as sturdily constructed. It comes at a costs price, but it is worth it for somebody that wants a great and also virtually an industrial grade table leading laser engraver capable of quick cutting and precise engraving thanks to a powerful 10W laser module.
Is XTool better than Glowforge?
The initial laser engraving and reducing equipment on our checklist is XTool D1 pro, the best option to Glowforge. It is in first place because it has actually received the Red Dot Style 2022 Honor. The outstanding design and also cutting edge technology established this machine in addition to other equipments on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, and XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm timber board at one time, and also XTool D1-10W can cut 10mm wood board at one time.
Can XTool D1 cut leather?
XTool can cut as well as inscribe a big range of materials, from something as slim as tissue paper to something as thick as leather and wood panels.
XTool D1 is a diode laser engraving as well as cutting equipment that is compatible with a wide variety of products, including various kinds of wood. Its powerful and very focused laser can easily reduce and inscribed wood with ultimate precision and also precision.
Can the XTool D1 engrave alliminum?
You can additionally get the infrared laser module, which is specifically produced steel as well as plastic inscription. It can inscribe different metals, including aluminum as well as rare-earth elements. It can also do tinted etching on different metals, including light weight aluminum.
High Quality Metal-non Metal Laser Cutting Machine Factories High Quality Metal-non Metal Laser Cutting Machine Factories