What is the Makeblock XTool D1? K40 Laser Cutter X Axis Off
XTool D1 is a laser cutter that has been produced by Makeblock. K40 Laser Cutter X Axis Off
The firm was established in 2012 by Jasen Wang, that researched airplane style at Northwestern Polytechnic University. The firm is committed to creating ingenious products to aid people share themselves via production. Since its development, Makeblock has actually launched several academic robotics, as well as a coding system for children. It also launched the MakeX Robotic Competition.
The XTool D1 is a portable laser engraver that can reducing and also etching a variety of materials. Its laser can cut out detailed shapes much faster than a scroll saw or jigsaw, as well as can be utilized for several jobs. Along with engraving, the D1 can likewise be used for other tasks, consisting of producing jewelry as well as lamp tones.
The D1 is a DIY kit that can be constructed in only concerning half a hr. Its room is foldable, permitting very easy mobility and effective ventilation. It is also made of flame-retardant polyester, making it risk-free from dirt fragments. The room likewise secures the working surface under the maker.
The XTool D1 is equipped with a laser component that can engrave on metals and also several various other materials. It has an ultra-fine pressed laser place of 0.08 x 0.08 mm. This enables finer engraving and higher precision.
The D1 also has a high resolution of 1000 DPI, that makes it possible to inscribe on a wide range of materials. The D1 likewise has an integrated smart device application that can be downloaded and install from the Android Store or the Apple App Store. The app can be used to import laser layouts from totally free vector websites, consisting of Etsy. The D1 can also be linked to a computer system using USB or WiFi. It can additionally transfer information using Wi-Fi or a large capacity TF card.
The D1 is capable of engraving on Poplar plywood, which is one of one of the most commonly used timbers for laser cutters. The D1 can also reduce on various other timbers, consisting of hard maple, walnut, as well as rosewood. Its laser head is adjustable, allowing for a 50mm variety. It can additionally refine materials approximately 10mm thick, which indicates that it has the ability to etch on a wide range of materials. The D1 is developed for both home and also service use.
The XTool D1 can be found in 2 designs: the 20W variation and also the 5W model. The 20W variation has a bigger laser head, and also a smaller working area. The 5W design has a workplace of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, which makes it a much faster maker. K40 Laser Cutter X Axis Off
The D1 features a steel structure, which offers optimum security and also toughness. It also has a concurrent belt to improve activity precision. The belt’s moderate tension is needed for accuracy, specifically when relocating at high speeds. The simultaneous belt can likewise aid the equipment stay secure and also lessen resonance. It can also remove the activity space, permitting fine vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most effective diode laser on the market. It generates clear lines down to 0.06 mm. This makes it a superb choice for mostly all inscribing jobs. Its layout is safe and also dependable. It is perfect for small companies as well as enthusiasts.
It can inscribe different sorts of steel as well as timber. It has the capability to cut 8 to tenmm plywood in one pass. It likewise has the ability to cut leather as well as polymer.
It includes a variety of devices. You can get the bundle pack that consists of the Air Assist Set and also Honeycomb Working Panel. It costs $119 and $269, respectively. You can also get a 1064nm laser head. This head reduces melt marks in plastic as well as is specifically helpful for delicate fashion jewelry layouts. It also has a motion sensing unit as well as fire discovery sensor.
It also includes an emergency situation stop button. It can be controlled via Wi-fi and can import laser layouts from totally free vector websites like Etsy. You can likewise control it by means of the Makeblock XTool D1 application on Android and also iOS.
It has a very good focus system. The laser crosshairs relocate as required and move to the framework of the art work. This makes the engraving very accurate. It can additionally be used to create a thickening impact, which can be helpful when etching large items.
The XTool D1 Pro has actually boosted features as well as laser power. It uses a 20W laser component to create a light beam that cuts things in one pass. It can puncture 8mm black acrylic and also 10mm basswood. It also has a higher rate. It can get to inscribing accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing approach on this equipment is extremely clever. Alongside the laser component, there is a rotating arm which you pull out when you wish to concentrate the laser. It assures that you go down the head on the appropriate distance from the product. After that you tighten the thumb screw and swivel the arm back up. K40 Laser Cutter X Axis Off
XTool D1 Special Features
Below are some of the top Special Functions of the XTool D1:
Wireless Connection
Machine can be connected using USB or a Wi-fi. And also you can additionally control with a mobile phone app on Android or iphone.
Trimming and also Engraving Different Materials
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is additionally an extremely qualified laser cutter.
Cut: Cardboard, Non-woven Material, Timber Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can reduce greater than 10mm thick things with this laser engraver. The device can cut timber, particularly Poplar plywood which is soft and also it is the preferred timber for all laser cutters.
I would certainly stay clear of some plastics like PVC and also plastic considering that it releases hydrogen chloride gas while being reduced. This gas is poisonous as well as very corrosive (your maker will certainly corrosion promptly).
We have evaluated the equipment with inscription as well as cutting different materials. You will locate the results of our examinations couple of phases lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have seen on all various other makers. This need to enable more accuracy and also much less mechanical wobble when etching at broadband. K40 Laser Cutter X Axis Off
Advanced Stepper Electric Motor Drivers
The machine has an extremely sophisticated controller board. It has Trinamic stepper motor vehicle drivers which drive the electric motors with a pure sine wave. This way the electric motors are very accurate as well as quiet. The motorists likewise sustain homing treatment without utilizing restriction switches over as the motorists gauge current via electric motors and detect the limit this way. This is why this device does not need physical restriction switches for homing.
The maker has vehicle drivers for 3 axis– so you can plug in the roller system as a Z axis instead of needing to separate one of the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be controlled by means of Wi-Fi or USB. The laser engraver tool instantly quits if an accidental touch occurs. This is fantastic for individuals who are worried regarding security. The tool is additionally suitable with Windows and also Mac OS systems.
The XTool D1 software application is extremely easy to use. When you have actually the artwork prepared, you can utilize the app to establish the laser. You can also customize the laser setups and also develop custom art work. The app additionally includes a materials checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting maker that can inscribe over 100 products. The laser engraver tool is easy to use as well as comes with a protective cover. The device has a warranty of twelve month.
XTool D1 Engraving
The XTool D1 is a very versatile inscribing machine. It cam be made use of to etch on all types of products/.
Below is a listing of products as well as functions that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an extremely well thought out device. Specific, quick and solidly developed. It comes with a costs rate, but it is worth it for somebody that desires a good and also virtually a commercial quality table leading laser engraver efficient in fast cutting and specific engraving thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The very first laser engraving and cutting maker on our list is XTool D1 pro, the best choice to Glowforge. It remains in first place due to the fact that it has actually gotten the Red Dot Design 2022 Honor. The exceptional layout and also advanced technology established this device in addition to other makers on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, and also XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm wood board at one time, and XTool D1-10W can reduce 10mm wood board at once.
Can XTool D1 cut leather?
XTool can cut and also inscribe a big range of materials, from something as slim as tissue paper to something as thick as natural leather and also timber panels.
XTool D1 is a diode laser inscription and also reducing equipment that is compatible with a wide variety of materials, including various sorts of timber. Its effective and also very concentrated laser can conveniently cut and also etched timber with utmost accuracy and also accuracy.
Can the XTool D1 engrave alliminum?
You can also get the infrared laser module, which is especially produced metal as well as plastic inscription. It can etch various metals, consisting of aluminum and rare-earth elements. It can likewise do tinted etching on different metals, including light weight aluminum.