What is the Makeblock XTool D1? K40 Laser Glass Engrave
XTool D1 is a laser cutter that has actually been developed by Makeblock. K40 Laser Glass Engrave
The company was developed in 2012 by Jasen Wang, who researched airplane design at Northwestern Polytechnic University. The company is dedicated to producing cutting-edge items to assist individuals express themselves with creation. Because its production, Makeblock has actually released a number of educational robots, in addition to a coding platform for youngsters. It also launched the MakeX Robotic Competitors.
The XTool D1 is a mobile laser engraver that is capable of cutting and also engraving a range of products. Its laser can eliminate elaborate forms much faster than a scroll saw or jigsaw, and also can be made use of for many different projects. In addition to inscription, the D1 can likewise be utilized for other jobs, consisting of developing jewelry and also lamp tones.
The D1 is a DIY set that can be set up in only about half an hour. Its room is foldable, enabling very easy mobility and also effective ventilation. It is likewise constructed from flame-retardant polyester, making it safe from dirt bits. The unit likewise secures the working surface under the device.
The XTool D1 is outfitted with a laser component that can engrave on metals as well as lots of other materials. It has an ultra-fine pressed laser place of 0.08 x 0.08 mm. This permits finer engraving as well as greater accuracy.
The D1 additionally has a high resolution of 1000 DPI, that makes it possible to inscribe on a variety of products. The D1 also has an integrated mobile phone app that can be downloaded and install from the Android Store or the Apple Application Store. The application can be used to import laser layouts from complimentary vector sites, including Etsy. The D1 can additionally be connected to a computer by means of USB or WiFi. It can also transfer data via Wi-Fi or a large ability TF card.
The D1 can inscribing on Poplar plywood, which is one of one of the most generally made use of timbers for laser cutters. The D1 can additionally cut on other timbers, including hard maple, walnut, and rosewood. Its laser head is flexible, enabling a 50mm range. It can additionally process materials up to 10mm thick, which implies that it is able to inscribe on a wide range of materials. The D1 is created for both house as well as company use.
The XTool D1 can be found in two models: the 20W variation as well as the 5W version. The 20W variation has a bigger laser head, and also a smaller working location. The 5W version has a workspace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a much faster machine. K40 Laser Glass Engrave
The D1 features a steel frame, which provides maximum security as well as resilience. It additionally has a concurrent belt to boost movement precision. The belt’s moderate tension is needed for precision, particularly when moving at high speeds. The synchronous belt can likewise assist the equipment remain secure as well as reduce resonance. It can additionally eliminate the movement space, allowing for fine vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most powerful diode laser on the marketplace. It creates clear lines to 0.06 mm. This makes it an outstanding choice for almost all engraving tasks. Its design is secure as well as trustworthy. It is ideal for small businesses and also hobbyists.
It can engrave different sorts of steel and also timber. It has the capability to reduce eight to tenmm plywood in one pass. It additionally has the capability to cut natural leather and also acrylic.
It features a variety of accessories. You can acquire the package pack that consists of the Air Assist Set as well as Honeycomb Working Panel. It costs $119 and also $269, specifically. You can additionally get a 1064nm laser head. This head lowers melt marks in plastic and also is specifically beneficial for fragile jewelry designs. It likewise has an activity sensing unit as well as fire discovery sensor.
It also features an emergency situation quit button. It can be regulated with WiFi as well as can import laser styles from cost-free vector sites like Etsy. You can likewise regulate it via the Makeblock XTool D1 app on Android and also iOS.
It has a very good focus system. The laser crosshairs relocate as needed and relocate to the frame of the art work. This makes the etching really accurate. It can additionally be used to produce a thickening result, which can be beneficial when etching big items.
The XTool D1 Pro has actually enhanced functions and also laser power. It makes use of a 20W laser module to create a beam that cuts items in one pass. It can puncture 8mm black acrylic as well as 10mm basswood. It also has a higher speed. It can get to engraving accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing approach on this device is very smart. Beside the laser component, there is a pivoting arm which you pull out when you wish to focus the laser. It ensures that you go down the head on the correct distance from the material. After that you tighten up the thumb screw as well as rotate the arm back up. K40 Laser Glass Engrave
XTool D1 Special Features
Below are some of the leading Unique Functions of the XTool D1:
Wireless Connection
Maker can be attached via USB or a WiFi. As well as you can likewise control with a smartphone app on Android or iOS.
Trimming as well as Engraving Different Products
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is additionally a really capable laser cutter.
Cut: Cardboard, Non-woven Fabric, Wood Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can cut more than 10mm thick things with this laser engraver. The equipment can cut wood, particularly Poplar plywood which is soft as well as it is the favored timber for all laser cutters.
I would certainly prevent some plastics like PVC and plastic considering that it launches hydrogen chloride gas while being reduced. This gas is toxic and very corrosive (your equipment will rust promptly).
We have checked the machine with engraving and cutting various products. You will find the outcomes of our tests few chapters lower.
The Makeblock XTool D1 has steel rollers on all axis rather than the plastic ones we have seen on all other makers. This ought to permit even more accuracy as well as much less mechanical wobble when inscribing at high speeds. K40 Laser Glass Engrave
Advanced Stepper Motor Drivers
The device has a very sophisticated controller board. It has Trinamic stepper electric motor chauffeurs which drive the electric motors with a pure sine wave. By doing this the motors are extremely exact as well as quiet. The motorists additionally support homing procedure without making use of limitation changes as the vehicle drivers gauge current through electric motors and identify the limit in this manner. This is why this machine does not need physical limit switches for homing.
The machine has drivers for 3 axis– so you can plug in the roller system as a Z axis instead of needing to separate one of the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be managed using Wi-Fi or USB. The laser engraver device instantly quits if an unintended touch takes place. This is terrific for people that are concerned regarding safety. The device is likewise compatible with Windows as well as Mac OS systems.
The XTool D1 software is very easy to use. As soon as you have actually the artwork prepared, you can make use of the application to establish the laser. You can additionally customize the laser settings and create custom-made art work. The application also includes a materials list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing machine that can engrave over 100 materials. The laser engraver device is easy to use and also features a safety cover. The equipment has a warranty of 12 months.
XTool D1 Engraving
The XTool D1 is a very functional etching machine. It cam be utilized to inscribe on all types of products/.
Right here is a listing of products and functions that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a very well considered maker. Accurate, rapid as well as well developed. It comes at a premium rate, but it is worth it for someone that wants a good as well as nearly an industrial quality table top laser engraver with the ability of fast cutting and also accurate engraving thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The first laser engraving as well as cutting machine on our list is XTool D1 pro, the best choice to Glowforge. It remains in top place because it has actually received the Red Dot Layout 2022 Honor. The superior layout and also advanced technology established this machine aside from various other makers on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, and XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm timber board at one time, and also XTool D1-10W can reduce 10mm wood board at one time.
Can XTool D1 cut leather?
XTool can cut as well as etch a massive range of products, from something as slim as tissue paper to something as thick as natural leather as well as wood panels.
XTool D1 is a diode laser inscription and cutting device that works with a vast array of materials, including various kinds of wood. Its effective and very concentrated laser can conveniently reduce as well as etched timber with utmost precision and accuracy.
Can the XTool D1 engrave alliminum?
You can likewise obtain the infrared laser component, which is specifically created steel as well as plastic inscription. It can inscribe numerous metals, consisting of aluminum and precious metals. It can additionally do colored engraving on various steels, consisting of light weight aluminum.