What is the Makeblock XTool D1? Metal Laser Cutting Machine
XTool D1 is a laser cutter that has actually been produced by Makeblock. Metal Laser Cutting Machine
The firm was developed in 2012 by Jasen Wang, that researched aircraft layout at Northwestern Polytechnic College. The firm is devoted to developing cutting-edge products to assist individuals share themselves through creation. Given that its production, Makeblock has actually released a number of educational robotics, as well as a coding platform for kids. It also introduced the MakeX Robot Competitors.
The XTool D1 is a mobile laser engraver that can reducing and also engraving a selection of products. Its laser can eliminate elaborate shapes much faster than a scroll saw or jigsaw, and can be used for many different jobs. Along with engraving, the D1 can additionally be utilized for various other jobs, consisting of producing fashion jewelry and also lamp shades.
The D1 is a do it yourself package that can be set up in only regarding half an hour. Its room is foldable, enabling simple transportability and also efficient air flow. It is likewise constructed from flame-retardant polyester, making it secure from dust bits. The enclosure likewise secures the functioning surface area under the device.
The XTool D1 is equipped with a laser module that is capable of engrave on steels and numerous various other products. It has actually an ultra-fine pressed laser spot of 0.08 x 0.08 mm. This allows for finer inscription and greater accuracy.
The D1 likewise has a high resolution of 1000 DPI, which makes it possible to engrave on a vast array of materials. The D1 additionally has an integrated smart device app that can be downloaded from the Android Store or the Apple Application Shop. The app can be used to import laser layouts from totally free vector sites, consisting of Etsy. The D1 can also be connected to a computer system through USB or WiFi. It can likewise transfer data by means of Wi-Fi or a huge capability TF card.
The D1 can engraving on Poplar plywood, which is just one of one of the most commonly utilized timbers for laser cutters. The D1 can also reduce on other timbers, consisting of tough maple, walnut, and rosewood. Its laser head is flexible, allowing for a 50mm array. It can also process products up to 10mm thick, which implies that it is able to engrave on a wide range of materials. The D1 is created for both home as well as organization use.
The XTool D1 can be found in two models: the 20W version and also the 5W version. The 20W version has a bigger laser head, and a smaller sized working location. The 5W model has a working area of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, which makes it a much faster equipment. Metal Laser Cutting Machine
The D1 includes a steel framework, which supplies maximum security and also durability. It likewise has a concurrent belt to enhance movement precision. The belt’s moderate stress is needed for precision, specifically when relocating at high speeds. The concurrent belt can also aid the equipment remain stable and also decrease vibration. It can likewise eliminate the motion space, allowing for great vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most powerful diode laser on the market. It creates clear lines down to 0.06 mm. This makes it an excellent selection for mostly all etching tasks. Its style is risk-free as well as dependable. It is optimal for local business and hobbyists.
It can inscribe various types of steel as well as timber. It has the capability to cut 8 to tenmm plywood in one pass. It also has the ability to cut natural leather and also acrylic.
It features a number of devices. You can buy the bundle pack that includes the Air Help Set and Honeycomb Working Panel. It costs $119 and also $269, specifically. You can additionally get a 1064nm laser head. This head decreases shed marks in plastic and is specifically useful for delicate fashion jewelry designs. It likewise has an activity sensing unit as well as fire detection sensing unit.
It also includes an emergency stop switch. It can be managed through Wi-fi and can import laser styles from complimentary vector sites like Etsy. You can also manage it using the Makeblock XTool D1 application on Android as well as iOS.
It has a very good focus mechanism. The laser crosshairs relocate as required and move to the framework of the artwork. This makes the inscribing really specific. It can also be made use of to create a thickening impact, which can be valuable when engraving big products.
The XTool D1 Pro has actually improved functions and also laser power. It utilizes a 20W laser module to create a beam that reduces objects in one pass. It can puncture 8mm black acrylic and 10mm basswood. It additionally has a higher speed. It can reach etching precision of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating approach on this maker is very brilliant. Beside the laser module, there is a rotating arm which you pull out when you intend to focus the laser. It ensures that you go down the head on the appropriate range from the material. After that you tighten the thumb screw and pivot the arm back up. Metal Laser Cutting Machine
XTool D1 Special Features
Below are some of the top Special Attributes of the XTool D1:
Wireless Connection
Machine can be attached through USB or a Wi-fi. And you can likewise control with a mobile phone app on Android or iOS.
Trimming and also Engraving Different Materials
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Layer Steel, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is additionally an extremely capable laser cutter.
Cut: Cardboard, Non-woven Material, Wood Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can reduce greater than 10mm thick stuff with this laser engraver. The device can reduce timber, specifically Poplar plywood which is soft and it is the preferred wood for all laser cutters.
I would prevent some plastics like PVC and vinyl given that it releases hydrogen chloride gas while being cut. This gas is poisonous and also extremely destructive (your equipment will certainly rust promptly).
We have actually evaluated the maker with inscription and also cutting different materials. You will certainly discover the results of our examinations few chapters lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have actually seen on all other makers. This need to allow for more precision as well as much less mechanical wobble when etching at high speeds. Metal Laser Cutting Machine
Advanced Stepper Electric Motor Drivers
The equipment has a very innovative controller board. It has Trinamic stepper motor chauffeurs which drive the electric motors with a pure sine wave. By doing this the electric motors are really exact as well as quiet. The chauffeurs likewise support homing procedure without making use of limitation changes as the vehicle drivers determine existing via electric motors and also spot the limit in this manner. This is why this device does not require physical limit switches for homing.
The machine has motorists for 3 axis– so you can plug in the roller system as a Z axis as opposed to needing to separate among the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be managed using Wi-Fi or USB. The laser engraver tool immediately stops if an unexpected touch happens. This is great for individuals who are worried concerning safety. The tool is also suitable with Windows as well as Mac OS systems.
The XTool D1 software is extremely easy to use. As soon as you have actually the art work prepared, you can use the application to set up the laser. You can additionally tailor the laser setups and develop personalized artwork. The app additionally includes a materials listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting maker that can inscribe over 100 materials. The laser engraver tool is easy to use and features a protective cover. The machine has a guarantee of year.
XTool D1 Engraving
The XTool D1 is an extremely flexible etching maker. It cam be made use of to engrave on all types of products/.
Here is a checklist of materials and attributes that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an extremely well thought out equipment. Precise, rapid as well as solidly developed. It comes at a costs price, yet it deserves it for somebody that desires a good as well as nearly a commercial quality table leading laser engraver capable of quick cutting and also accurate inscription thanks to a powerful 10W laser module.
Is XTool better than Glowforge?
The first laser inscription and also cutting machine on our checklist is XTool D1 pro, the most effective alternative to Glowforge. It is in starting point because it has gotten the Red Dot Layout 2022 Honor. The superior style as well as modern technology set this machine in addition to other equipments on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, as well as XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm timber board at one time, and also XTool D1-10W can reduce 10mm wood board at once.
Can XTool D1 cut leather?
XTool can cut and also inscribe a significant variety of materials, from something as slim as cells paper to something as thick as leather and timber panels.
XTool D1 is a diode laser inscription as well as cutting equipment that works with a wide variety of materials, consisting of various kinds of timber. Its effective as well as extremely concentrated laser can conveniently cut as well as inscribed wood with best precision and precision.
Can the XTool D1 engrave alliminum?
You can additionally get the infrared laser component, which is specifically made for steel as well as plastic inscription. It can engrave numerous metals, including aluminum as well as rare-earth elements. It can likewise do colored etching on different steels, including light weight aluminum.