What is the Makeblock XTool D1? Pencil Engraving Laser K40
XTool D1 is a laser cutter that has been created by Makeblock. Pencil Engraving Laser K40
The company was developed in 2012 by Jasen Wang, that researched aircraft design at Northwestern Polytechnic College. The firm is dedicated to producing innovative items to aid individuals share themselves via development. Given that its creation, Makeblock has launched several educational robots, as well as a coding platform for kids. It also launched the MakeX Robot Competitors.
The XTool D1 is a mobile laser engraver that is capable of cutting and also inscribing a selection of products. Its laser can eliminate complex shapes much faster than a scroll saw or jigsaw, and also can be made use of for several projects. Along with engraving, the D1 can additionally be utilized for other projects, including producing precious jewelry and lamp tones.
The D1 is a DIY package that can be assembled in just about half an hour. Its unit is foldable, enabling easy portability as well as efficient ventilation. It is additionally constructed from flame-retardant polyester, making it risk-free from dirt fragments. The room also secures the working surface area under the device.
The XTool D1 is equipped with a laser module that is capable of engrave on metals and numerous other materials. It has an ultra-fine pressed laser place of 0.08 x 0.08 mm. This permits finer engraving and also greater precision.
The D1 likewise has a high resolution of 1000 DPI, which makes it feasible to etch on a wide variety of materials. The D1 likewise has a built-in mobile phone app that can be downloaded and install from the Android Store or the Apple App Shop. The app can be used to import laser layouts from free vector sites, including Etsy. The D1 can likewise be connected to a computer system using USB or WiFi. It can also transfer information via Wi-Fi or a huge capacity TF card.
The D1 can inscribing on Poplar plywood, which is among one of the most frequently used timbers for laser cutters. The D1 can likewise cut on other timbers, consisting of difficult maple, walnut, as well as rosewood. Its laser head is flexible, allowing for a 50mm array. It can also refine products as much as 10mm thick, which implies that it has the ability to inscribe on a wide range of materials. The D1 is developed for both home and service usage.
The XTool D1 can be found in two versions: the 20W variation as well as the 5W model. The 20W variation has a larger laser head, as well as a smaller sized working location. The 5W design has a workspace of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, that makes it a much faster device. Pencil Engraving Laser K40
The D1 includes a steel framework, which supplies maximum stability and also durability. It likewise has a synchronous belt to boost motion precision. The belt’s modest tension is required for precision, especially when relocating at high speeds. The concurrent belt can likewise help the device remain steady and decrease vibration. It can additionally eliminate the activity gap, enabling fine vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most effective diode laser on the market. It generates clear lines to 0.06 mm. This makes it an exceptional choice for mostly all inscribing tasks. Its design is secure and dependable. It is optimal for local business as well as hobbyists.
It can etch different types of steel and also wood. It has the ability to cut 8 to tenmm plywood in one pass. It likewise has the ability to reduce leather and acrylic.
It includes a variety of accessories. You can purchase the bundle pack that consists of the Air Assist Establish as well as Honeycomb Working Panel. It sets you back $119 and also $269, respectively. You can additionally obtain a 1064nm laser head. This head minimizes burn marks in plastic and also is especially useful for delicate jewelry designs. It also has a movement sensing unit as well as fire detection sensor.
It also features an emergency quit button. It can be regulated through WiFi and also can import laser layouts from totally free vector sites like Etsy. You can also regulate it through the Makeblock XTool D1 application on Android and iphone.
It has an excellent emphasis system. The laser crosshairs relocate as needed and also transfer to the framework of the artwork. This makes the engraving very exact. It can likewise be used to create a thickening impact, which can be useful when engraving huge things.
The XTool D1 Pro has enhanced attributes and also laser power. It uses a 20W laser component to create a light beam that cuts things in one pass. It can puncture 8mm black acrylic and also 10mm basswood. It also has a greater rate. It can reach engraving accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating method on this equipment is extremely creative. Beside the laser component, there is a swivelling arm which you take out when you wish to concentrate the laser. It guarantees that you go down the directly the appropriate distance from the product. After that you tighten the thumb screw and also pivot the arm back up. Pencil Engraving Laser K40
XTool D1 Special Features
Here are a few of the top Special Features of the XTool D1:
Wireless Connectivity
Device can be connected via USB or a Wi-fi. And also you can likewise control with a smart device app on Android or iOS.
Trimming and also Engraving Different Materials
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate.
The Makeblock XTool D1 is likewise a very capable laser cutter.
Cut: Cardboard, Non-woven Material, Wood Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can cut more than 10mm thick stuff with this laser engraver. The machine can cut wood, particularly Poplar plywood which is soft and also it is the preferred wood for all laser cutters.
I would certainly avoid some plastics like PVC and also vinyl given that it releases hydrogen chloride gas while being cut. This gas is harmful and extremely corrosive (your maker will corrosion swiftly).
We have checked the maker with engraving and also reducing different products. You will locate the results of our tests few chapters lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have seen on all various other equipments. This must enable more accuracy as well as much less mechanical wobble when engraving at high speeds. Pencil Engraving Laser K40
Advanced Stepper Electric Motor Drivers
The equipment has an extremely sophisticated controller board. It has Trinamic stepper motor motorists which drive the electric motors with a pure sine wave. By doing this the electric motors are really precise and silent. The drivers also sustain homing procedure without making use of limitation switches as the vehicle drivers measure existing via motors and detect the limit this way. This is why this machine does not require physical limitation changes for homing.
The maker has vehicle drivers for 3 axis– so you can plug in the roller system as a Z axis as opposed to having to disconnect among the axis when working with a roller system.
XTool D1 Software
XTool D1 can be regulated using Wi-Fi or USB. The laser engraver device immediately stops if an unintentional touch happens. This is fantastic for individuals who are worried regarding security. The tool is also compatible with Windows and also Mac OS systems.
The XTool D1 software application is very easy to use. As soon as you have the art work prepared, you can make use of the app to set up the laser. You can additionally customize the laser settings and create customized art work. The application additionally includes a materials list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting device that can inscribe over 100 materials. The laser engraver tool is easy to use and includes a safety cover. The maker has a guarantee of year.
XTool D1 Engraving
The XTool D1 is a really versatile engraving machine. It cam be made use of to engrave on all kinds of materials/.
Here is a list of products and attributes that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a very well thought out machine. Accurate, fast and well constructed. It comes with a premium rate, but it is worth it for somebody that wants a great and virtually an industrial quality table leading laser engraver efficient in rapid cutting and precise engraving thanks to a powerful 10W laser component.
Is XTool better than Glowforge?
The very first laser inscription and also cutting equipment on our checklist is XTool D1 pro, the very best choice to Glowforge. It remains in top place since it has actually gotten the Red Dot Style 2022 Award. The superior layout and cutting edge innovation established this maker besides various other machines on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, and XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm wood board at once, as well as XTool D1-10W can reduce 10mm wood board at once.
Can XTool D1 cut leather?
XTool can cut and also etch a big selection of products, from something as slim as tissue paper to something as thick as leather as well as wood panels.
XTool D1 is a diode laser inscription as well as reducing equipment that works with a variety of products, including various kinds of timber. Its effective and extremely focused laser can conveniently reduce and engraved wood with utmost precision and accuracy.
Can the XTool D1 engrave alliminum?
You can additionally obtain the infrared laser module, which is particularly made for metal as well as plastic engraving. It can inscribe different metals, including aluminum and rare-earth elements. It can likewise do tinted inscribing on various metals, including light weight aluminum.