What is the Makeblock XTool D1? Plate And Tube Fiber Laser Cutting Machine
XTool D1 is a laser cutter that has been developed by Makeblock. Plate And Tube Fiber Laser Cutting Machine
The firm was developed in 2012 by Jasen Wang, that studied aircraft design at Northwestern Polytechnic University. The firm is committed to creating cutting-edge products to assist individuals share themselves through development. Since its development, Makeblock has actually released numerous academic robots, along with a coding system for youngsters. It also launched the MakeX Robot Competition.
The XTool D1 is a portable laser engraver that is capable of reducing and also etching a selection of materials. Its laser can eliminate elaborate shapes much faster than a scroll saw or jigsaw, and can be used for many different tasks. Along with engraving, the D1 can additionally be utilized for other tasks, including producing jewelry and lamp tones.
The D1 is a DIY kit that can be put together in just concerning half a hr. Its enclosure is foldable, permitting simple mobility and also efficient air flow. It is additionally made from flame-retardant polyester, making it secure from dirt particles. The unit additionally protects the working surface under the equipment.
The XTool D1 is furnished with a laser module that is capable of engrave on metals as well as many other materials. It has an ultra-fine pressed laser place of 0.08 x 0.08 mm. This allows for finer inscription as well as greater precision.
The D1 also has a high resolution of 1000 DPI, that makes it feasible to engrave on a large range of materials. The D1 additionally has an integrated smart device app that can be downloaded from the Android Shop or the Apple App Shop. The app can be made use of to import laser designs from free vector websites, including Etsy. The D1 can likewise be attached to a computer by means of USB or WiFi. It can additionally transfer information through Wi-Fi or a large capacity TF card.
The D1 can etching on Poplar plywood, which is among the most generally used timbers for laser cutters. The D1 can additionally reduce on other woods, including difficult maple, walnut, and rosewood. Its laser head is adjustable, enabling a 50mm variety. It can also refine materials up to 10mm thick, which suggests that it is able to inscribe on a variety of materials. The D1 is developed for both residence and service use.
The XTool D1 can be found in two versions: the 20W version as well as the 5W design. The 20W variation has a bigger laser head, and also a smaller sized working location. The 5W version has a workspace of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, that makes it a faster equipment. Plate And Tube Fiber Laser Cutting Machine
The D1 includes a steel frame, which supplies maximum security as well as sturdiness. It likewise has a concurrent belt to enhance movement accuracy. The belt’s modest stress is required for precision, especially when moving at high speeds. The simultaneous belt can additionally help the maker stay steady and decrease resonance. It can likewise get rid of the motion space, permitting fine vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most powerful diode laser on the marketplace. It creates clear lines to 0.06 mm. This makes it an exceptional option for nearly all engraving tasks. Its design is safe and also reputable. It is excellent for small businesses as well as hobbyists.
It can inscribe various sorts of steel and also timber. It has the ability to cut eight to tenmm plywood in one pass. It additionally has the capability to reduce natural leather and acrylic.
It features a number of devices. You can acquire the bundle pack that consists of the Air Help Set and also Honeycomb Working Panel. It sets you back $119 and $269, respectively. You can also obtain a 1064nm laser head. This head lowers burn marks in plastic as well as is specifically helpful for fragile precious jewelry designs. It additionally has a movement sensor and flame discovery sensor.
It likewise includes an emergency quit button. It can be regulated with Wi-fi and also can import laser styles from totally free vector sites like Etsy. You can likewise regulate it using the Makeblock XTool D1 app on Android and also iphone.
It has a great focus system. The laser crosshairs relocate as required and move to the structure of the art work. This makes the etching extremely exact. It can likewise be used to produce a thickening effect, which can be helpful when etching huge things.
The XTool D1 Pro has actually improved attributes and laser power. It makes use of a 20W laser component to produce a beam of light that reduces things in one pass. It can cut through 8mm black acrylic as well as 10mm basswood. It also has a greater rate. It can get to engraving accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating approach on this equipment is very clever. Next to the laser module, there is a pivoting arm which you pull out when you wish to focus the laser. It assures that you drop the directly the right distance from the material. Then you tighten the thumb screw and pivot the arm back up. Plate And Tube Fiber Laser Cutting Machine
XTool D1 Special Features
Here are several of the leading Special Functions of the XTool D1:
Wireless Connection
Equipment can be linked through USB or a Wi-fi. And also you can also manage with a smart device app on Android or iOS.
Cutting and Inscription Different Products
Engrave: Timber, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Area Layer Steel, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is also an extremely qualified laser cutter.
Cut: Cardboard, Non-woven Material, Wood Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can reduce greater than 10mm thick things with this laser engraver. The equipment can reduce timber, especially Poplar plywood which is soft and it is the favored timber for all laser cutters.
I would certainly stay clear of some plastics like PVC as well as vinyl since it releases hydrogen chloride gas while being reduced. This gas is harmful and very corrosive (your maker will corrosion rapidly).
We have actually checked the maker with inscription and also cutting different materials. You will find the outcomes of our tests couple of chapters lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have actually seen on all various other makers. This need to enable more precision and also much less mechanical wobble when etching at high speeds. Plate And Tube Fiber Laser Cutting Machine
Advanced Stepper Motor Drivers
The equipment has a very innovative controller board. It has Trinamic stepper motor drivers which drive the motors with a pure sine wave. In this manner the electric motors are extremely precise and quiet. The drivers also support homing treatment without using limit switches as the chauffeurs measure present via motors as well as spot the limit this way. This is why this machine does not need physical limitation switches over for homing.
The machine has motorists for 3 axis– so you can plug in the roller system as a Z axis rather than having to disconnect among the axis when working with a roller system.
XTool D1 Software
XTool D1 can be controlled using Wi-Fi or USB. The laser engraver tool instantly stops if an unexpected touch happens. This is fantastic for individuals who are concerned about safety. The tool is also compatible with Windows as well as Mac OS systems.
The XTool D1 software is extremely easy to use. When you have the artwork prepared, you can use the application to set up the laser. You can likewise personalize the laser settings and produce custom artwork. The app additionally includes a materials checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing device that can etch over 100 materials. The laser engraver tool is easy to use and features a safety cover. The maker has a warranty of twelve month.
XTool D1 Engraving
The XTool D1 is a very versatile inscribing equipment. It cam be utilized to etch on all types of materials/.
Here is a list of products and functions that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an extremely well considered equipment. Accurate, fast and also well constructed. It comes with a premium price, yet it deserves it for a person that wants an excellent and also practically an industrial quality table leading laser engraver with the ability of fast cutting and accurate inscription thanks to a powerful 10W laser component.
Is XTool better than Glowforge?
The initial laser engraving and also cutting equipment on our checklist is XTool D1 pro, the most effective alternative to Glowforge. It is in first place because it has actually gotten the Red Dot Design 2022 Honor. The outstanding style and also modern innovation set this maker in addition to other machines on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, as well as XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm wood board at once, as well as XTool D1-10W can cut 10mm wood board at one time.
Can XTool D1 cut leather?
XTool can cut and also etch a substantial selection of materials, from something as slim as cells paper to something as thick as natural leather as well as wood panels.
XTool D1 is a diode laser inscription and also cutting machine that works with a vast array of products, including various kinds of timber. Its powerful and highly focused laser can easily cut as well as inscribed timber with ultimate accuracy as well as accuracy.
Can the XTool D1 engrave alliminum?
You can likewise obtain the infrared laser component, which is particularly made for metal as well as plastic inscription. It can inscribe numerous steels, including light weight aluminum as well as rare-earth elements. It can additionally do colored etching on various steels, including aluminum.
Plate And Tube Fiber Laser Cutting Machine Plate And Tube Fiber Laser Cutting Machine