What is the Makeblock XTool D1? Plate And Tube Integrated Laser Cutting Machine Manufacturers
XTool D1 is a laser cutter that has actually been developed by Makeblock. Plate And Tube Integrated Laser Cutting Machine Manufacturers
The company was established in 2012 by Jasen Wang, that studied airplane style at Northwestern Polytechnic University. The firm is committed to creating cutting-edge products to aid people express themselves through creation. Since its development, Makeblock has actually launched numerous academic robotics, as well as a coding platform for youngsters. It also released the MakeX Robot Competition.
The XTool D1 is a portable laser engraver that can reducing and also engraving a selection of products. Its laser can eliminate elaborate shapes much faster than a scroll saw or jigsaw, as well as can be made use of for several tasks. In addition to inscription, the D1 can likewise be made use of for various other jobs, consisting of creating jewelry as well as light shades.
The D1 is a DIY package that can be set up in only about half an hour. Its enclosure is foldable, permitting very easy transportability and also effective ventilation. It is additionally constructed from flame-retardant polyester, making it risk-free from dirt particles. The unit likewise secures the working surface area under the equipment.
The XTool D1 is outfitted with a laser component that is capable of engrave on steels as well as many other products. It has actually an ultra-fine compressed laser spot of 0.08 x 0.08 mm. This permits finer engraving and also greater precision.
The D1 additionally has a high resolution of 1000 DPI, which makes it possible to engrave on a wide variety of products. The D1 likewise has a built-in mobile phone application that can be downloaded from the Android Shop or the Apple App Shop. The application can be used to import laser layouts from complimentary vector sites, including Etsy. The D1 can likewise be linked to a computer system through USB or WiFi. It can likewise transfer information using Wi-Fi or a big capability TF card.
The D1 can inscribing on Poplar plywood, which is among the most generally utilized timbers for laser cutters. The D1 can additionally reduce on various other woods, consisting of tough maple, walnut, and rosewood. Its laser head is adjustable, allowing for a 50mm array. It can likewise refine products approximately 10mm thick, which implies that it is able to engrave on a wide range of products. The D1 is developed for both house and company usage.
The XTool D1 can be found in two versions: the 20W variation and also the 5W version. The 20W version has a bigger laser head, as well as a smaller sized working location. The 5W version has a working area of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, which makes it a quicker maker. Plate And Tube Integrated Laser Cutting Machine Manufacturers
The D1 includes a steel structure, which gives optimum stability as well as resilience. It additionally has a synchronous belt to improve movement precision. The belt’s modest stress is required for precision, especially when moving at high speeds. The simultaneous belt can also help the equipment remain secure and lessen vibration. It can also eliminate the activity void, permitting great vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most powerful diode laser on the market. It produces clear lines down to 0.06 mm. This makes it an exceptional choice for nearly all inscribing jobs. Its layout is secure and reputable. It is ideal for local business as well as hobbyists.
It can etch different kinds of steel as well as wood. It has the ability to reduce eight to tenmm plywood in one pass. It likewise has the ability to reduce natural leather as well as acrylic.
It features a number of accessories. You can get the bundle pack that includes the Air Assist Set as well as Honeycomb Working Panel. It sets you back $119 and $269, specifically. You can additionally get a 1064nm laser head. This head decreases melt marks in plastic as well as is specifically useful for fragile jewelry layouts. It likewise has a movement sensing unit as well as flame discovery sensor.
It additionally features an emergency situation quit switch. It can be controlled with WiFi and can import laser styles from free vector sites like Etsy. You can additionally control it through the Makeblock XTool D1 app on Android and iOS.
It has a very good emphasis mechanism. The laser crosshairs relocate as needed and also relocate to the structure of the artwork. This makes the etching extremely exact. It can additionally be used to create a thickening effect, which can be beneficial when inscribing big products.
The XTool D1 Pro has boosted functions and also laser power. It utilizes a 20W laser module to develop a beam of light that reduces items in one pass. It can puncture 8mm black acrylic and also 10mm basswood. It also has a higher rate. It can reach inscribing precision of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing technique on this maker is very creative. Next to the laser module, there is a pivoting arm which you pull out when you wish to focus the laser. It guarantees that you go down the head on the correct distance from the material. Then you tighten up the thumb screw and also rotate the arm back up. Plate And Tube Integrated Laser Cutting Machine Manufacturers
XTool D1 Special Features
Below are some of the leading Unique Features of the XTool D1:
Wireless Connection
Device can be connected by means of USB or a Wi-fi. As well as you can likewise control with a smart device app on Android or iOS.
Trimming as well as Inscription Different Products
Engrave: Timber, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Steel, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Cloth, Slate.
The Makeblock XTool D1 is additionally a very capable laser cutter.
Cut: Cardboard, Non-woven Textile, Timber Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can reduce more than 10mm thick stuff with this laser engraver. The maker can cut wood, especially Poplar plywood which is soft as well as it is the preferred wood for all laser cutters.
I would prevent some plastics like PVC and also plastic because it releases hydrogen chloride gas while being reduced. This gas is hazardous and really harsh (your machine will certainly rust swiftly).
We have checked the maker with inscription and cutting various products. You will locate the outcomes of our examinations few chapters lower.
The Makeblock XTool D1 has steel rollers on all axis rather than the plastic ones we have actually seen on all various other makers. This must enable even more precision and also less mechanical wobble when engraving at high speeds. Plate And Tube Integrated Laser Cutting Machine Manufacturers
Advanced Stepper Electric Motor Drivers
The equipment has a really innovative controller board. It has Trinamic stepper electric motor motorists which drive the electric motors with a pure sine wave. By doing this the electric motors are extremely precise as well as silent. The motorists also sustain homing procedure without utilizing limit switches as the drivers measure present via electric motors as well as identify the limit in this manner. This is why this machine does not require physical limitation changes for homing.
The device has drivers for 3 axis– so you can connect in the roller system as a Z axis rather than needing to separate among the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be controlled by means of Wi-Fi or USB. The laser engraver tool instantly stops if an accidental touch happens. This is wonderful for individuals that are concerned about security. The tool is additionally compatible with Windows as well as Mac OS systems.
The XTool D1 software is very easy to use. When you have the artwork prepared, you can make use of the app to establish the laser. You can likewise customize the laser setups as well as create personalized artwork. The app also includes a materials listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting machine that can engrave over 100 materials. The laser engraver tool is easy to use and also features a safety cover. The machine has a service warranty of year.
XTool D1 Engraving
The XTool D1 is a very flexible engraving maker. It cam be made use of to inscribe on all sorts of materials/.
Below is a list of products and also features that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an effectively considered machine. Specific, rapid as well as solidly constructed. It comes at a costs price, yet it deserves it for a person that desires a good and practically an industrial quality table top laser engraver capable of rapid cutting and accurate inscription thanks to an effective 10W laser component.
Is XTool better than Glowforge?
The initial laser inscription and also cutting equipment on our checklist is XTool D1 pro, the most effective option to Glowforge. It remains in starting point because it has gotten the Red Dot Style 2022 Honor. The superior layout and cutting edge modern technology set this device apart from other makers on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, and also XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm wood board at one time, and also XTool D1-10W can cut 10mm timber board at one time.
Can XTool D1 cut leather?
XTool can reduce and also engrave a substantial variety of materials, from something as slim as tissue paper to something as thick as natural leather as well as wood panels.
XTool D1 is a diode laser engraving as well as cutting device that is compatible with a variety of materials, consisting of different types of wood. Its powerful as well as highly focused laser can easily reduce as well as engraved timber with utmost precision and also accuracy.
Can the XTool D1 engrave alliminum?
You can also get the infrared laser module, which is specifically created steel and plastic inscription. It can engrave numerous steels, including aluminum and also precious metals. It can also do tinted etching on numerous metals, including aluminum.
Plate And Tube Integrated Laser Cutting Machine Manufacturers Plate And Tube Integrated Laser Cutting Machine Manufacturers