What is the Makeblock XTool D1? Replace K40 Laser
XTool D1 is a laser cutter that has been produced by Makeblock. Replace K40 Laser
The company was established in 2012 by Jasen Wang, who examined aircraft design at Northwestern Polytechnic University. The firm is devoted to creating ingenious products to assist individuals express themselves via creation. Since its development, Makeblock has released numerous academic robots, as well as a coding system for children. It also launched the MakeX Robotic Competitors.
The XTool D1 is a portable laser engraver that can reducing as well as inscribing a selection of products. Its laser can remove detailed forms much faster than a scroll saw or jigsaw, as well as can be used for various tasks. In addition to inscription, the D1 can additionally be made use of for other jobs, consisting of creating fashion jewelry and light tones.
The D1 is a do it yourself package that can be constructed in only regarding half a hr. Its enclosure is collapsible, enabling very easy portability and efficient air flow. It is likewise made of flame-retardant polyester, making it safe from dirt fragments. The enclosure additionally secures the working surface under the maker.
The XTool D1 is equipped with a laser component that can engrave on steels as well as several various other products. It has actually an ultra-fine compressed laser place of 0.08 x 0.08 mm. This permits finer engraving and higher accuracy.
The D1 also has a high resolution of 1000 DPI, that makes it possible to engrave on a wide range of materials. The D1 likewise has an integrated smartphone application that can be downloaded and install from the Android Shop or the Apple Application Store. The app can be made use of to import laser layouts from totally free vector websites, consisting of Etsy. The D1 can likewise be linked to a computer system using USB or WiFi. It can additionally move data via Wi-Fi or a large capability TF card.
The D1 is capable of inscribing on Poplar plywood, which is just one of one of the most typically utilized woods for laser cutters. The D1 can also cut on other timbers, including difficult maple, walnut, and also rosewood. Its laser head is adjustable, enabling a 50mm array. It can also process products approximately 10mm thick, which means that it has the ability to inscribe on a variety of materials. The D1 is created for both residence as well as service usage.
The XTool D1 comes in two models: the 20W variation as well as the 5W design. The 20W variation has a bigger laser head, and also a smaller sized working area. The 5W model has a workspace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, which makes it a faster machine. Replace K40 Laser
The D1 features a steel structure, which gives optimum security and also resilience. It likewise has a concurrent belt to boost motion accuracy. The belt’s modest tension is needed for precision, especially when moving at high speeds. The synchronous belt can also assist the machine remain secure and reduce resonance. It can likewise get rid of the activity gap, enabling fine vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most powerful diode laser on the marketplace. It produces clear lines down to 0.06 mm. This makes it an outstanding option for mostly all etching jobs. Its design is secure and reputable. It is suitable for small companies and enthusiasts.
It can inscribe various types of metal and timber. It has the capacity to cut eight to tenmm plywood in one pass. It also has the ability to reduce natural leather and polymer.
It comes with a variety of devices. You can get the package pack that consists of the Air Assist Establish and also Honeycomb Working Panel. It sets you back $119 and also $269, respectively. You can additionally obtain a 1064nm laser head. This head decreases shed marks in plastic and also is particularly helpful for delicate precious jewelry layouts. It likewise has an activity sensor and also flame discovery sensor.
It additionally includes an emergency stop button. It can be regulated through WiFi and can import laser layouts from complimentary vector websites like Etsy. You can additionally manage it using the Makeblock XTool D1 application on Android and iphone.
It has a great focus mechanism. The laser crosshairs relocate as required and also move to the framework of the artwork. This makes the inscribing very specific. It can likewise be made use of to develop a thickening effect, which can be useful when engraving big things.
The XTool D1 Pro has improved features and also laser power. It utilizes a 20W laser component to develop a beam of light that cuts things in one pass. It can puncture 8mm black acrylic and 10mm basswood. It also has a higher rate. It can get to inscribing precision of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing approach on this maker is really clever. Alongside the laser module, there is a swivelling arm which you pull out when you intend to concentrate the laser. It ensures that you drop the head on the appropriate distance from the product. Then you tighten the thumb screw and swivel the arm back up. Replace K40 Laser
XTool D1 Special Features
Below are some of the leading Special Attributes of the XTool D1:
Wireless Connectivity
Equipment can be attached through USB or a WiFi. And also you can likewise regulate with a smartphone app on Android or iOS.
Trimming and Engraving Different Products
Engrave: Timber, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Layer Metal, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is additionally an extremely capable laser cutter.
Cut: Cardboard, Non-woven Textile, Wood Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can reduce greater than 10mm thick things with this laser engraver. The device can cut timber, particularly Poplar plywood which is soft as well as it is the preferred wood for all laser cutters.
I would avoid some plastics like PVC and vinyl considering that it launches hydrogen chloride gas while being cut. This gas is harmful and really corrosive (your machine will certainly rust promptly).
We have actually checked the equipment with engraving and also cutting different materials. You will certainly discover the results of our examinations couple of chapters lower.
The Makeblock XTool D1 has steel rollers on all axis rather than the plastic ones we have actually seen on all various other devices. This need to enable more accuracy and less mechanical wobble when etching at high speeds. Replace K40 Laser
Advanced Stepper Electric Motor Drivers
The equipment has a very advanced controller board. It has Trinamic stepper electric motor vehicle drivers which drive the electric motors with a pure sine wave. In this manner the motors are very exact as well as silent. The drivers also support homing procedure without making use of limitation changes as the vehicle drivers measure present through motors and identify the limit this way. This is why this equipment does not need physical restriction switches over for homing.
The maker has chauffeurs for 3 axis– so you can connect in the roller system as a Z axis instead of having to separate among the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be regulated through Wi-Fi or USB. The laser engraver tool automatically stops if an accidental touch occurs. This is fantastic for individuals who are worried regarding security. The device is also compatible with Windows as well as Mac OS systems.
The XTool D1 software is really easy to use. As soon as you have actually the art work prepared, you can make use of the application to establish the laser. You can likewise customize the laser setups and also create custom-made artwork. The application likewise includes a materials list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing maker that can engrave over 100 materials. The laser engraver device is easy to use as well as features a protective cover. The machine has a guarantee of one year.
XTool D1 Engraving
The XTool D1 is a really flexible engraving machine. It cam be used to etch on all kinds of materials/.
Below is a checklist of products as well as attributes that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a very well considered equipment. Specific, rapid and well developed. It comes at a premium rate, but it is worth it for someone that desires a great as well as practically a commercial grade table leading laser engraver capable of quick cutting as well as specific engraving thanks to an effective 10W laser component.
Is XTool better than Glowforge?
The first laser engraving and also cutting equipment on our checklist is XTool D1 pro, the most effective choice to Glowforge. It is in first place because it has actually gotten the Red Dot Design 2022 Honor. The superior style and also cutting edge modern technology established this maker in addition to various other equipments on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, and also XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm timber board at once, and also XTool D1-10W can cut 10mm wood board at one time.
Can XTool D1 cut leather?
XTool can cut and also etch a substantial range of products, from something as slim as tissue paper to something as thick as leather as well as wood panels.
XTool D1 is a diode laser inscription and cutting equipment that is compatible with a wide range of materials, including various types of timber. Its effective and very focused laser can quickly cut as well as inscribed timber with ultimate precision and also accuracy.
Can the XTool D1 engrave alliminum?
You can additionally obtain the infrared laser module, which is particularly made for steel as well as plastic inscription. It can inscribe numerous metals, consisting of aluminum and also rare-earth elements. It can likewise do colored inscribing on various metals, consisting of aluminum.