What is the Makeblock XTool D1? Sandblast Laser Engraving Machine
XTool D1 is a laser cutter that has been developed by Makeblock. Sandblast Laser Engraving Machine
The company was developed in 2012 by Jasen Wang, that examined aircraft design at Northwestern Polytechnic University. The company is devoted to producing ingenious items to help individuals express themselves through creation. Since its creation, Makeblock has launched a number of instructional robots, in addition to a coding system for youngsters. It also released the MakeX Robotic Competition.
The XTool D1 is a mobile laser engraver that is capable of reducing as well as engraving a variety of products. Its laser can eliminate detailed shapes much faster than a scroll saw or jigsaw, and can be utilized for several tasks. Along with engraving, the D1 can additionally be utilized for other tasks, consisting of producing precious jewelry as well as lamp tones.
The D1 is a DIY kit that can be set up in just about half an hour. Its enclosure is collapsible, allowing for simple mobility and reliable ventilation. It is additionally made of flame-retardant polyester, making it risk-free from dirt particles. The unit also safeguards the working surface under the equipment.
The XTool D1 is outfitted with a laser component that can engrave on steels as well as many other materials. It has an ultra-fine compressed laser place of 0.08 x 0.08 mm. This allows for finer inscription and also greater accuracy.
The D1 likewise has a high resolution of 1000 DPI, that makes it feasible to inscribe on a large range of products. The D1 likewise has an integrated mobile phone application that can be downloaded and install from the Android Shop or the Apple App Shop. The app can be used to import laser designs from free vector websites, including Etsy. The D1 can also be connected to a computer system via USB or WiFi. It can additionally transfer data via Wi-Fi or a huge ability TF card.
The D1 is capable of etching on Poplar plywood, which is among the most commonly utilized woods for laser cutters. The D1 can additionally reduce on other timbers, including tough maple, walnut, and also rosewood. Its laser head is flexible, allowing for a 50mm variety. It can likewise refine products up to 10mm thick, which indicates that it is able to engrave on a wide variety of products. The D1 is created for both residence and also service use.
The XTool D1 can be found in 2 designs: the 20W variation and also the 5W version. The 20W variation has a bigger laser head, and also a smaller working area. The 5W version has a workspace of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, that makes it a quicker maker. Sandblast Laser Engraving Machine
The D1 features a steel structure, which offers optimum security and also resilience. It likewise has a simultaneous belt to enhance motion precision. The belt’s modest stress is needed for accuracy, particularly when moving at high speeds. The synchronous belt can also help the maker stay steady as well as lessen vibration. It can additionally get rid of the activity gap, allowing for fine vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most effective diode laser on the market. It creates clear lines to 0.06 mm. This makes it a superb selection for almost all inscribing tasks. Its layout is risk-free as well as dependable. It is ideal for small companies and also enthusiasts.
It can inscribe different kinds of steel as well as timber. It has the ability to cut 8 to tenmm plywood in one pass. It also has the capacity to reduce natural leather as well as acrylic.
It comes with a number of accessories. You can acquire the bundle pack that includes the Air Assist Establish as well as Honeycomb Working Panel. It costs $119 and also $269, respectively. You can likewise get a 1064nm laser head. This head minimizes burn marks in plastic and also is particularly helpful for fragile fashion jewelry layouts. It additionally has a motion sensing unit and also fire detection sensing unit.
It likewise features an emergency situation stop switch. It can be regulated through Wi-fi as well as can import laser designs from complimentary vector sites like Etsy. You can also regulate it using the Makeblock XTool D1 app on Android as well as iOS.
It has a great focus device. The laser crosshairs move as required as well as transfer to the structure of the artwork. This makes the inscribing very exact. It can likewise be used to produce a thickening impact, which can be valuable when inscribing huge items.
The XTool D1 Pro has improved features and also laser power. It uses a 20W laser component to produce a beam of light that cuts objects in one pass. It can cut through 8mm black acrylic and also 10mm basswood. It additionally has a greater speed. It can get to etching precision of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing technique on this machine is very clever. Beside the laser module, there is a rotating arm which you take out when you intend to concentrate the laser. It assures that you go down the directly the appropriate range from the material. Then you tighten the thumb screw and pivot the arm back up. Sandblast Laser Engraving Machine
XTool D1 Special Features
Below are some of the top Unique Attributes of the XTool D1:
Wireless Connection
Equipment can be attached through USB or a WiFi. And you can likewise regulate with a smartphone app on Android or iOS.
Trimming and also Engraving Different Products
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Area Layer Metal, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is additionally a very qualified laser cutter.
Cut: Cardboard, Non-woven Textile, Wood Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can reduce greater than 10mm thick stuff with this laser engraver. The device can reduce timber, specifically Poplar plywood which is soft and it is the preferred timber for all laser cutters.
I would avoid some plastics like PVC as well as vinyl given that it releases hydrogen chloride gas while being cut. This gas is poisonous as well as really destructive (your equipment will certainly corrosion rapidly).
We have checked the maker with inscription and reducing various products. You will certainly discover the results of our examinations few chapters lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have seen on all various other machines. This need to permit even more precision and also much less mechanical wobble when inscribing at high speeds. Sandblast Laser Engraving Machine
Advanced Stepper Electric Motor Drivers
The equipment has a very advanced controller board. It has Trinamic stepper electric motor motorists which drive the electric motors with a pure sine wave. In this manner the electric motors are very precise and also quiet. The chauffeurs likewise sustain homing treatment without using limit changes as the chauffeurs determine existing through electric motors and discover the limit in this manner. This is why this equipment does not need physical limitation changes for homing.
The equipment has chauffeurs for 3 axis– so you can plug in the roller system as a Z axis as opposed to needing to separate one of the axis when working with a roller system.
XTool D1 Software
XTool D1 can be regulated by means of Wi-Fi or USB. The laser engraver tool instantly stops if an accidental touch occurs. This is wonderful for individuals who are concerned regarding safety and security. The device is additionally compatible with Windows and also Mac OS systems.
The XTool D1 software application is very easy to use. As soon as you have actually the artwork prepared, you can utilize the app to set up the laser. You can also personalize the laser settings and create personalized artwork. The application likewise consists of a materials checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing equipment that can engrave over 100 products. The laser engraver tool is easy to use and also includes a safety cover. The machine has a service warranty of year.
XTool D1 Engraving
The XTool D1 is a really functional engraving equipment. It cam be utilized to engrave on all kinds of products/.
Right here is a checklist of materials and also functions that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an effectively considered device. Exact, quick and sturdily constructed. It comes at a premium rate, but it is worth it for somebody that desires a good as well as virtually a commercial quality table top laser engraver capable of rapid cutting and specific engraving thanks to a powerful 10W laser module.
Is XTool better than Glowforge?
The initial laser engraving and also reducing equipment on our listing is XTool D1 pro, the best choice to Glowforge. It is in first place because it has gotten the Red Dot Style 2022 Award. The exceptional layout and also state-of-the-art innovation established this machine besides various other machines on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, and also XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm timber board at one time, as well as XTool D1-10W can cut 10mm timber board at once.
Can XTool D1 cut leather?
XTool can cut and also inscribe a significant variety of materials, from something as slim as tissue paper to something as thick as leather as well as wood panels.
XTool D1 is a diode laser inscription as well as reducing maker that is compatible with a wide range of products, including different types of wood. Its effective and very concentrated laser can easily reduce and engraved timber with ultimate accuracy and precision.
Can the XTool D1 engrave alliminum?
You can also obtain the infrared laser component, which is especially produced steel and also plastic inscription. It can engrave different metals, consisting of light weight aluminum and rare-earth elements. It can also do tinted engraving on various steels, consisting of aluminum.
Sandblast Laser Engraving Machine Sandblast Laser Engraving Machine