What is the Makeblock XTool D1? Scanner Key Programmer Xtool X300 Plus
XTool D1 is a laser cutter that has actually been created by Makeblock. Scanner Key Programmer Xtool X300 Plus
The firm was developed in 2012 by Jasen Wang, who studied airplane design at Northwestern Polytechnic University. The firm is dedicated to creating cutting-edge products to assist people reveal themselves with creation. Because its production, Makeblock has launched a number of academic robotics, as well as a coding system for children. It also introduced the MakeX Robot Competitors.
The XTool D1 is a portable laser engraver that is capable of cutting and etching a range of products. Its laser can remove elaborate shapes much faster than a scroll saw or jigsaw, and can be used for many different tasks. In addition to inscription, the D1 can also be made use of for other tasks, consisting of developing precious jewelry and light tones.
The D1 is a DIY package that can be set up in just about half an hour. Its unit is collapsible, allowing for easy mobility and also effective air flow. It is additionally made of flame-retardant polyester, making it risk-free from dust particles. The room also safeguards the functioning surface area under the equipment.
The XTool D1 is equipped with a laser component that is capable of engrave on steels and numerous various other materials. It has actually an ultra-fine compressed laser place of 0.08 x 0.08 mm. This allows for finer inscription and higher precision.
The D1 additionally has a high resolution of 1000 DPI, that makes it feasible to engrave on a large range of products. The D1 also has an integrated mobile phone application that can be downloaded from the Android Store or the Apple Application Shop. The app can be used to import laser layouts from cost-free vector sites, consisting of Etsy. The D1 can also be connected to a computer via USB or WiFi. It can additionally move data by means of Wi-Fi or a big ability TF card.
The D1 is capable of inscribing on Poplar plywood, which is among the most typically used timbers for laser cutters. The D1 can likewise reduce on various other timbers, consisting of difficult maple, walnut, as well as rosewood. Its laser head is adjustable, allowing for a 50mm array. It can additionally refine materials as much as 10mm thick, which suggests that it is able to engrave on a wide array of products. The D1 is made for both home and also service usage.
The XTool D1 can be found in 2 models: the 20W variation and also the 5W design. The 20W variation has a larger laser head, and also a smaller sized working location. The 5W version has a workplace of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, that makes it a much faster device. Scanner Key Programmer Xtool X300 Plus
The D1 includes a steel frame, which supplies optimum security and also toughness. It also has a synchronous belt to improve movement precision. The belt’s moderate tension is required for accuracy, specifically when relocating at high speeds. The synchronous belt can also help the device remain stable and lessen vibration. It can additionally remove the activity void, allowing for great vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most effective diode laser on the marketplace. It creates clear lines down to 0.06 mm. This makes it an exceptional choice for almost all engraving jobs. Its style is secure and also trustworthy. It is optimal for small companies as well as hobbyists.
It can engrave different kinds of steel and timber. It has the capacity to reduce eight to tenmm plywood in one pass. It likewise has the ability to reduce leather and polymer.
It comes with a number of accessories. You can get the package pack that consists of the Air Assist Establish and Honeycomb Working Panel. It sets you back $119 and $269, respectively. You can likewise get a 1064nm laser head. This head minimizes burn marks in plastic as well as is especially beneficial for delicate jewelry designs. It also has a movement sensor as well as fire detection sensor.
It likewise features an emergency situation quit button. It can be regulated via WiFi and also can import laser layouts from totally free vector sites like Etsy. You can also regulate it through the Makeblock XTool D1 app on Android and iOS.
It has a great emphasis device. The laser crosshairs relocate as needed and move to the structure of the artwork. This makes the inscribing extremely accurate. It can also be used to produce a thickening effect, which can be beneficial when etching huge things.
The XTool D1 Pro has actually improved features as well as laser power. It uses a 20W laser component to develop a beam of light that reduces items in one pass. It can cut through 8mm black acrylic and 10mm basswood. It additionally has a higher speed. It can reach engraving accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating approach on this maker is extremely creative. Next to the laser module, there is a swivelling arm which you pull out when you intend to focus the laser. It ensures that you go down the head on the appropriate range from the product. Then you tighten the thumb screw as well as pivot the arm back up. Scanner Key Programmer Xtool X300 Plus
XTool D1 Special Features
Here are some of the leading Special Attributes of the XTool D1:
Wireless Connection
Maker can be connected via USB or a Wi-fi. And also you can also control with a smart device application on Android or iOS.
Trimming as well as Inscription Different Products
Engrave: Timber, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Area Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is additionally an extremely qualified laser cutter.
Cut: Cardboard, Non-woven Fabric, Timber Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can cut more than 10mm thick things with this laser engraver. The equipment can cut timber, particularly Poplar plywood which is soft and it is the recommended wood for all laser cutters.
I would certainly stay clear of some plastics like PVC and also vinyl since it releases hydrogen chloride gas while being cut. This gas is harmful and really corrosive (your maker will certainly rust swiftly).
We have evaluated the maker with inscription and reducing different materials. You will certainly find the results of our tests couple of phases lower.
The Makeblock XTool D1 has steel rollers on all axis rather than the plastic ones we have actually seen on all other makers. This must permit even more precision and less mechanical wobble when inscribing at broadband. Scanner Key Programmer Xtool X300 Plus
Advanced Stepper Electric Motor Drivers
The maker has a really sophisticated controller board. It has Trinamic stepper motor motorists which drive the motors with a pure sine wave. This way the motors are very precise and silent. The drivers also sustain homing procedure without utilizing restriction switches over as the chauffeurs determine present with electric motors and also detect the limit in this manner. This is why this machine does not need physical restriction switches for homing.
The maker has chauffeurs for 3 axis– so you can connect in the roller system as a Z axis as opposed to needing to disconnect one of the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be managed by means of Wi-Fi or USB. The laser engraver tool immediately stops if an unexpected touch takes place. This is terrific for individuals who are concerned concerning safety and security. The tool is also compatible with Windows and also Mac OS systems.
The XTool D1 software is extremely easy to use. When you have actually the art work prepared, you can use the app to establish the laser. You can also personalize the laser setups and also create customized art work. The application likewise consists of a products checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing maker that can inscribe over 100 materials. The laser engraver device is easy to use as well as comes with a protective cover. The device has a service warranty of 12 months.
XTool D1 Engraving
The XTool D1 is a very versatile engraving maker. It cam be made use of to inscribe on all sorts of materials/.
Below is a listing of materials as well as features that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an extremely well thought out machine. Precise, rapid and also solidly constructed. It comes with a costs rate, however it is worth it for a person that wants a great and practically a commercial quality table top laser engraver capable of quick cutting and also precise engraving thanks to an effective 10W laser component.
Is XTool better than Glowforge?
The initial laser inscription and also cutting device on our list is XTool D1 pro, the very best alternative to Glowforge. It is in top place because it has actually obtained the Red Dot Design 2022 Award. The impressive style and advanced innovation set this machine apart from other devices on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, and XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm timber board at one time, and also XTool D1-10W can reduce 10mm timber board at one time.
Can XTool D1 cut leather?
XTool can reduce and also inscribe a substantial variety of materials, from something as slim as cells paper to something as thick as natural leather and wood panels.
XTool D1 is a diode laser inscription and reducing machine that is compatible with a variety of materials, consisting of different kinds of timber. Its effective and very concentrated laser can quickly cut and engraved wood with best precision and also accuracy.
Can the XTool D1 engrave alliminum?
You can also get the infrared laser module, which is especially created metal and plastic engraving. It can etch different steels, consisting of aluminum and also precious metals. It can additionally do tinted inscribing on various metals, consisting of light weight aluminum.
Scanner Key Programmer Xtool X300 Plus Scanner Key Programmer Xtool X300 Plus