What is the Makeblock XTool D1? Top 10 Fiber Laser Cutting Machine
XTool D1 is a laser cutter that has been developed by Makeblock. Top 10 Fiber Laser Cutting Machine
The company was developed in 2012 by Jasen Wang, who researched airplane design at Northwestern Polytechnic University. The firm is devoted to producing ingenious products to assist people express themselves through creation. Considering that its creation, Makeblock has released several educational robotics, as well as a coding system for kids. It also released the MakeX Robotic Competition.
The XTool D1 is a portable laser engraver that can cutting as well as etching a variety of products. Its laser can remove complex shapes much faster than a scroll saw or jigsaw, and also can be utilized for various tasks. Along with inscription, the D1 can also be used for other jobs, consisting of creating jewelry and also lamp tones.
The D1 is a DIY kit that can be assembled in only about half a hr. Its unit is collapsible, allowing for simple portability and also efficient air flow. It is additionally made from flame-retardant polyester, making it safe from dust fragments. The unit additionally safeguards the working surface under the maker.
The XTool D1 is geared up with a laser component that can engrave on metals as well as several various other materials. It has an ultra-fine pressed laser place of 0.08 x 0.08 mm. This allows for finer engraving as well as higher accuracy.
The D1 additionally has a high resolution of 1000 DPI, that makes it possible to etch on a wide range of materials. The D1 additionally has a built-in smart device app that can be downloaded and install from the Android Store or the Apple Application Store. The application can be made use of to import laser layouts from totally free vector websites, consisting of Etsy. The D1 can likewise be connected to a computer system using USB or WiFi. It can also move information by means of Wi-Fi or a large ability TF card.
The D1 can etching on Poplar plywood, which is one of the most generally made use of timbers for laser cutters. The D1 can likewise reduce on other timbers, including tough maple, walnut, as well as rosewood. Its laser head is adjustable, enabling a 50mm range. It can additionally refine materials up to 10mm thick, which indicates that it has the ability to inscribe on a wide range of materials. The D1 is created for both house as well as service usage.
The XTool D1 is available in 2 versions: the 20W variation as well as the 5W design. The 20W variation has a larger laser head, as well as a smaller sized working area. The 5W version has a workspace of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, that makes it a much faster machine. Top 10 Fiber Laser Cutting Machine
The D1 includes a steel frame, which supplies maximum security and also resilience. It also has a concurrent belt to boost motion precision. The belt’s moderate tension is needed for accuracy, especially when moving at broadband. The concurrent belt can likewise help the device remain stable and also decrease resonance. It can likewise remove the activity space, permitting fine vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most powerful diode laser on the marketplace. It creates clear lines to 0.06 mm. This makes it an excellent choice for nearly all engraving jobs. Its design is safe and also trusted. It is ideal for small businesses and also enthusiasts.
It can etch various types of steel as well as timber. It has the ability to reduce 8 to tenmm plywood in one pass. It also has the capacity to cut leather as well as polymer.
It comes with a variety of devices. You can acquire the package pack that consists of the Air Help Establish and also Honeycomb Working Panel. It sets you back $119 as well as $269, respectively. You can additionally get a 1064nm laser head. This head reduces burn marks in plastic and is especially helpful for fragile jewelry styles. It also has a movement sensing unit as well as fire detection sensor.
It additionally includes an emergency stop button. It can be regulated through Wi-fi and also can import laser styles from totally free vector sites like Etsy. You can likewise regulate it through the Makeblock XTool D1 app on Android as well as iphone.
It has an excellent focus system. The laser crosshairs relocate as needed and relocate to the framework of the artwork. This makes the etching very accurate. It can additionally be made use of to develop a thickening effect, which can be helpful when inscribing large products.
The XTool D1 Pro has improved functions and also laser power. It makes use of a 20W laser module to develop a beam of light that reduces objects in one pass. It can puncture 8mm black acrylic and 10mm basswood. It also has a higher rate. It can get to inscribing accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing method on this equipment is really brilliant. Next to the laser module, there is a rotating arm which you pull out when you wish to concentrate the laser. It guarantees that you go down the head on the correct range from the product. After that you tighten up the thumb screw as well as pivot the arm back up. Top 10 Fiber Laser Cutting Machine
XTool D1 Special Features
Right here are a few of the leading Unique Features of the XTool D1:
Wireless Connection
Machine can be connected via USB or a Wi-fi. And you can likewise regulate with a smartphone application on Android or iphone.
Trimming and Engraving Different Products
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Layer Steel, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is also an extremely qualified laser cutter.
Cut: Cardboard, Non-woven Textile, Wood Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can cut greater than 10mm thick stuff with this laser engraver. The device can cut wood, especially Poplar plywood which is soft as well as it is the recommended timber for all laser cutters.
I would avoid some plastics like PVC as well as vinyl considering that it releases hydrogen chloride gas while being reduced. This gas is toxic as well as very harsh (your maker will certainly rust promptly).
We have checked the machine with inscription and reducing different materials. You will locate the outcomes of our examinations couple of chapters lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have seen on all various other equipments. This need to allow for more accuracy and also less mechanical wobble when inscribing at high speeds. Top 10 Fiber Laser Cutting Machine
Advanced Stepper Electric Motor Drivers
The equipment has a really advanced controller board. It has Trinamic stepper motor chauffeurs which drive the motors with a pure sine wave. By doing this the motors are really specific as well as quiet. The drivers additionally support homing treatment without utilizing limit changes as the chauffeurs gauge present through motors as well as find the limit this way. This is why this equipment does not need physical restriction switches over for homing.
The maker has vehicle drivers for 3 axis– so you can connect in the roller system as a Z axis rather than having to detach among the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be regulated via Wi-Fi or USB. The laser engraver tool immediately stops if an accidental touch takes place. This is excellent for individuals who are worried about safety. The device is additionally compatible with Windows and Mac OS systems.
The XTool D1 software application is very easy to use. Once you have the art work prepared, you can use the application to set up the laser. You can additionally tailor the laser setups and also develop personalized artwork. The app also consists of a products checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing maker that can inscribe over 100 materials. The laser engraver device is easy to use and includes a protective cover. The equipment has a service warranty of twelve month.
XTool D1 Engraving
The XTool D1 is an extremely versatile inscribing device. It cam be utilized to inscribe on all types of materials/.
Below is a list of materials as well as attributes that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an effectively considered maker. Exact, rapid and solidly constructed. It comes with a costs price, but it is worth it for somebody that desires a good and also almost an industrial grade table top laser engraver efficient in quick cutting and exact inscription thanks to a powerful 10W laser component.
Is XTool better than Glowforge?
The very first laser inscription as well as cutting maker on our listing is XTool D1 pro, the most effective choice to Glowforge. It remains in first place since it has actually obtained the Red Dot Style 2022 Award. The outstanding design and also state-of-the-art technology established this device besides various other makers on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, and XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm wood board at one time, and XTool D1-10W can reduce 10mm timber board at one time.
Can XTool D1 cut leather?
XTool can cut and also inscribe a huge selection of materials, from something as slim as tissue paper to something as thick as leather as well as wood panels.
XTool D1 is a diode laser inscription and reducing maker that works with a wide variety of materials, consisting of various types of timber. Its effective and also highly focused laser can easily reduce and engraved wood with ultimate accuracy as well as precision.
Can the XTool D1 engrave alliminum?
You can additionally obtain the infrared laser module, which is especially created steel and plastic engraving. It can etch different metals, including light weight aluminum and also precious metals. It can additionally do tinted etching on various metals, including aluminum.
Top 10 Fiber Laser Cutting Machine Top 10 Fiber Laser Cutting Machine