What is the Makeblock XTool D1? Vvdi Xtool
XTool D1 is a laser cutter that has actually been created by Makeblock. Vvdi Xtool
The business was developed in 2012 by Jasen Wang, that studied aircraft design at Northwestern Polytechnic College. The company is dedicated to producing cutting-edge items to help people share themselves via creation. Given that its creation, Makeblock has launched numerous educational robots, in addition to a coding platform for youngsters. It additionally released the MakeX Robot Competitors.
The XTool D1 is a portable laser engraver that is capable of cutting and etching a range of materials. Its laser can cut out elaborate forms much faster than a scroll saw or jigsaw, as well as can be made use of for several projects. Along with engraving, the D1 can additionally be made use of for various other projects, including creating fashion jewelry as well as lamp tones.
The D1 is a DIY set that can be constructed in only about half an hour. Its unit is collapsible, allowing for simple mobility and also efficient air flow. It is likewise made of flame-retardant polyester, making it safe from dirt particles. The enclosure additionally shields the working surface under the machine.
The XTool D1 is equipped with a laser module that can engrave on metals and also several various other materials. It has actually an ultra-fine pressed laser place of 0.08 x 0.08 mm. This allows for finer engraving as well as higher accuracy.
The D1 also has a high resolution of 1000 DPI, which makes it feasible to engrave on a wide range of products. The D1 additionally has an integrated smartphone app that can be downloaded from the Android Store or the Apple App Shop. The application can be utilized to import laser designs from totally free vector sites, including Etsy. The D1 can additionally be linked to a computer system through USB or WiFi. It can additionally move information by means of Wi-Fi or a large capacity TF card.
The D1 can etching on Poplar plywood, which is just one of the most typically utilized woods for laser cutters. The D1 can additionally cut on various other timbers, consisting of difficult maple, walnut, as well as rosewood. Its laser head is adjustable, allowing for a 50mm variety. It can also refine products as much as 10mm thick, which suggests that it has the ability to inscribe on a wide variety of materials. The D1 is created for both home and also company usage.
The XTool D1 can be found in 2 designs: the 20W variation as well as the 5W design. The 20W variation has a bigger laser head, and also a smaller working location. The 5W model has a workspace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a quicker machine. Vvdi Xtool
The D1 includes a steel structure, which provides maximum security and also durability. It likewise has a synchronous belt to improve activity precision. The belt’s moderate stress is required for accuracy, specifically when moving at high speeds. The simultaneous belt can also aid the equipment remain stable and also decrease resonance. It can additionally eliminate the activity space, permitting fine vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most powerful diode laser on the market. It generates clear lines down to 0.06 mm. This makes it an outstanding option for almost all etching jobs. Its style is risk-free and trusted. It is excellent for small companies and also enthusiasts.
It can inscribe various sorts of steel and timber. It has the capability to cut 8 to tenmm plywood in one pass. It likewise has the ability to reduce leather and polymer.
It comes with a variety of devices. You can purchase the package pack that includes the Air Assist Set and Honeycomb Working Panel. It sets you back $119 as well as $269, specifically. You can also get a 1064nm laser head. This head reduces burn marks in plastic and is particularly valuable for fragile fashion jewelry styles. It additionally has a motion sensing unit and flame discovery sensor.
It likewise features an emergency situation quit switch. It can be controlled via WiFi as well as can import laser designs from totally free vector websites like Etsy. You can likewise control it via the Makeblock XTool D1 application on Android as well as iphone.
It has a great emphasis mechanism. The laser crosshairs move as required and also transfer to the frame of the artwork. This makes the etching extremely accurate. It can also be made use of to develop a thickening effect, which can be beneficial when engraving large products.
The XTool D1 Pro has actually boosted features and also laser power. It makes use of a 20W laser module to produce a light beam that cuts objects in one pass. It can cut through 8mm black acrylic and 10mm basswood. It likewise has a greater rate. It can get to engraving precision of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating approach on this equipment is extremely creative. Beside the laser module, there is a rotating arm which you take out when you intend to focus the laser. It guarantees that you drop the head on the appropriate range from the material. Then you tighten up the thumb screw as well as swivel the arm back up. Vvdi Xtool
XTool D1 Special Features
Below are a few of the top Special Attributes of the XTool D1:
Wireless Connection
Device can be connected via USB or a Wi-fi. As well as you can likewise control with a mobile phone app on Android or iOS.
Cutting and Inscription Different Materials
Engrave: Timber, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Layer Steel, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is likewise a very qualified laser cutter.
Cut: Cardboard, Non-woven Material, Timber Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can cut greater than 10mm thick things with this laser engraver. The maker can cut wood, specifically Poplar plywood which is soft and also it is the preferred timber for all laser cutters.
I would stay clear of some plastics like PVC and vinyl since it launches hydrogen chloride gas while being reduced. This gas is toxic as well as extremely harsh (your device will corrosion quickly).
We have examined the machine with engraving and also cutting various materials. You will certainly locate the results of our tests couple of chapters lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have actually seen on all other devices. This should enable even more precision and also much less mechanical wobble when etching at high speeds. Vvdi Xtool
Advanced Stepper Motor Drivers
The maker has a very sophisticated controller board. It has Trinamic stepper electric motor vehicle drivers which drive the motors with a pure sine wave. This way the electric motors are very specific and also silent. The motorists likewise sustain homing treatment without using limit switches as the vehicle drivers determine existing with electric motors and also identify the limit by doing this. This is why this machine does not need physical restriction switches for homing.
The device has drivers for 3 axis– so you can plug in the roller system as a Z axis as opposed to having to disconnect among the axis when working with a roller system.
XTool D1 Software
XTool D1 can be regulated using Wi-Fi or USB. The laser engraver device instantly quits if an unexpected touch occurs. This is terrific for people that are concerned regarding security. The tool is likewise compatible with Windows as well as Mac OS systems.
The XTool D1 software is extremely easy to use. Once you have actually the artwork prepared, you can utilize the app to set up the laser. You can additionally personalize the laser setups and also create customized art work. The application likewise consists of a products listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing machine that can inscribe over 100 products. The laser engraver device is easy to use and includes a protective cover. The equipment has a guarantee of year.
XTool D1 Engraving
The XTool D1 is a very functional etching maker. It cam be utilized to inscribe on all sorts of products/.
Below is a list of products as well as attributes that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a quite possibly considered equipment. Precise, fast and well built. It comes with a premium cost, but it is worth it for somebody that wants an excellent as well as virtually a commercial quality table top laser engraver efficient in quick cutting and also accurate engraving thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The very first laser engraving and reducing equipment on our listing is XTool D1 pro, the very best option to Glowforge. It is in starting point because it has obtained the Red Dot Design 2022 Award. The superior design and also cutting edge modern technology established this equipment besides various other makers on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, and also XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm wood board at once, and XTool D1-10W can reduce 10mm timber board at once.
Can XTool D1 cut leather?
XTool can cut as well as inscribe a significant variety of materials, from something as slim as tissue paper to something as thick as leather and timber panels.
XTool D1 is a diode laser inscription and also reducing maker that works with a large range of products, including different sorts of wood. Its effective and also extremely concentrated laser can conveniently cut and engraved timber with utmost accuracy and accuracy.
Can the XTool D1 engrave alliminum?
You can likewise obtain the infrared laser module, which is specifically produced steel and also plastic inscription. It can engrave numerous metals, consisting of aluminum and also precious metals. It can likewise do tinted inscribing on different metals, including aluminum.