What is the Makeblock XTool D1? Xtool 100 Pro
XTool D1 is a laser cutter that has been produced by Makeblock. Xtool 100 Pro
The firm was established in 2012 by Jasen Wang, that examined aircraft style at Northwestern Polytechnic University. The business is committed to developing ingenious products to assist individuals express themselves through development. Because its creation, Makeblock has launched numerous educational robotics, along with a coding system for kids. It also introduced the MakeX Robot Competition.
The XTool D1 is a mobile laser engraver that is capable of cutting and also engraving a range of materials. Its laser can eliminate detailed forms much faster than a scroll saw or jigsaw, and can be made use of for various projects. Along with engraving, the D1 can additionally be utilized for other tasks, including creating jewelry and lamp shades.
The D1 is a DIY package that can be constructed in just regarding half a hr. Its unit is foldable, allowing for easy portability and efficient air flow. It is likewise made of flame-retardant polyester, making it risk-free from dirt bits. The enclosure additionally shields the functioning surface under the maker.
The XTool D1 is equipped with a laser component that can engrave on metals as well as numerous other materials. It has actually an ultra-fine compressed laser spot of 0.08 x 0.08 mm. This allows for finer engraving and also higher precision.
The D1 additionally has a high resolution of 1000 DPI, that makes it feasible to inscribe on a large range of products. The D1 also has a built-in mobile phone application that can be downloaded and install from the Android Store or the Apple Application Shop. The application can be utilized to import laser styles from totally free vector sites, including Etsy. The D1 can additionally be connected to a computer through USB or WiFi. It can additionally move information via Wi-Fi or a big capability TF card.
The D1 is capable of etching on Poplar plywood, which is just one of one of the most commonly used timbers for laser cutters. The D1 can additionally cut on other woods, including difficult maple, walnut, as well as rosewood. Its laser head is adjustable, permitting a 50mm array. It can also refine products up to 10mm thick, which suggests that it is able to etch on a variety of products. The D1 is created for both home and also service usage.
The XTool D1 is available in two versions: the 20W version as well as the 5W design. The 20W variation has a larger laser head, and a smaller sized working location. The 5W design has a working area of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, which makes it a much faster maker. Xtool 100 Pro
The D1 includes a steel structure, which supplies optimum security as well as sturdiness. It likewise has a synchronous belt to boost movement accuracy. The belt’s modest tension is required for precision, particularly when relocating at high speeds. The synchronous belt can additionally aid the machine remain stable and minimize vibration. It can also get rid of the motion space, permitting fine vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most powerful diode laser on the marketplace. It creates clear lines down to 0.06 mm. This makes it an outstanding selection for nearly all inscribing tasks. Its design is safe and also trustworthy. It is ideal for local business and also enthusiasts.
It can inscribe various sorts of metal as well as timber. It has the ability to cut eight to tenmm plywood in one pass. It additionally has the capacity to cut leather as well as acrylic.
It includes a number of accessories. You can get the package pack that consists of the Air Assist Set and Honeycomb Working Panel. It costs $119 as well as $269, specifically. You can also obtain a 1064nm laser head. This head reduces shed marks in plastic and also is particularly helpful for fragile jewelry layouts. It additionally has a movement sensing unit and also fire detection sensor.
It additionally includes an emergency situation quit switch. It can be regulated via Wi-fi and also can import laser styles from complimentary vector sites like Etsy. You can additionally control it through the Makeblock XTool D1 app on Android and also iOS.
It has an excellent emphasis mechanism. The laser crosshairs relocate as required and also transfer to the frame of the artwork. This makes the inscribing very accurate. It can also be made use of to create a thickening impact, which can be useful when engraving big items.
The XTool D1 Pro has boosted functions and also laser power. It uses a 20W laser component to develop a light beam that reduces items in one pass. It can puncture 8mm black acrylic and 10mm basswood. It additionally has a greater rate. It can get to inscribing accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing method on this maker is very clever. Next to the laser module, there is a swivelling arm which you take out when you wish to concentrate the laser. It assures that you drop the directly the correct distance from the material. Then you tighten up the thumb screw as well as pivot the arm back up. Xtool 100 Pro
XTool D1 Special Features
Right here are a few of the top Unique Functions of the XTool D1:
Wireless Connection
Equipment can be connected by means of USB or a Wi-fi. And also you can also regulate with a smart device application on Android or iphone.
Cutting and Inscription Different Materials
Engrave: Timber, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate.
The Makeblock XTool D1 is additionally an extremely capable laser cutter.
Cut: Cardboard, Non-woven Fabric, Timber Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can cut greater than 10mm thick stuff with this laser engraver. The device can cut timber, especially Poplar plywood which is soft and it is the preferred timber for all laser cutters.
I would avoid some plastics like PVC and also vinyl because it launches hydrogen chloride gas while being cut. This gas is toxic and extremely corrosive (your maker will certainly corrosion promptly).
We have actually tested the device with inscription as well as reducing various products. You will certainly locate the results of our tests couple of chapters lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have seen on all various other devices. This need to enable even more precision as well as much less mechanical wobble when inscribing at broadband. Xtool 100 Pro
Advanced Stepper Electric Motor Drivers
The maker has a really sophisticated controller board. It has Trinamic stepper electric motor motorists which drive the electric motors with a pure sine wave. In this manner the electric motors are very exact as well as silent. The chauffeurs likewise sustain homing treatment without using limitation switches as the chauffeurs gauge existing via motors and detect the limit this way. This is why this device does not need physical limitation switches for homing.
The device has drivers for 3 axis– so you can connect in the roller system as a Z axis as opposed to having to detach one of the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be regulated through Wi-Fi or USB. The laser engraver device automatically stops if an accidental touch occurs. This is fantastic for individuals that are worried about safety. The device is likewise suitable with Windows as well as Mac OS systems.
The XTool D1 software is extremely easy to use. As soon as you have actually the artwork prepared, you can utilize the app to establish the laser. You can also customize the laser setups as well as develop personalized art work. The application additionally includes a materials checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting equipment that can engrave over 100 products. The laser engraver tool is easy to use as well as includes a safety cover. The device has a warranty of year.
XTool D1 Engraving
The XTool D1 is an extremely functional inscribing device. It cam be utilized to inscribe on all types of products/.
Here is a listing of products and functions that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an effectively thought out equipment. Accurate, quick and also solidly constructed. It comes at a premium price, however it is worth it for somebody that desires a good and nearly an industrial grade table top laser engraver with the ability of quick cutting and exact engraving thanks to a powerful 10W laser component.
Is XTool better than Glowforge?
The initial laser engraving as well as cutting machine on our listing is XTool D1 pro, the most effective alternative to Glowforge. It remains in top place since it has received the Red Dot Style 2022 Honor. The impressive style and modern technology established this equipment apart from various other equipments on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, and also XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm wood board at once, and also XTool D1-10W can cut 10mm wood board at once.
Can XTool D1 cut leather?
XTool can cut and engrave a massive variety of products, from something as slim as cells paper to something as thick as leather and also wood panels.
XTool D1 is a diode laser inscription and cutting maker that works with a variety of materials, including different kinds of wood. Its effective as well as very concentrated laser can easily reduce as well as etched wood with best precision as well as accuracy.
Can the XTool D1 engrave alliminum?
You can additionally obtain the infrared laser module, which is especially made for steel as well as plastic engraving. It can etch various metals, consisting of aluminum and also rare-earth elements. It can additionally do tinted inscribing on numerous metals, including aluminum.