What is the Makeblock XTool D1? Xtool Kc100
XTool D1 is a laser cutter that has been produced by Makeblock. Xtool Kc100
The company was established in 2012 by Jasen Wang, who researched aircraft layout at Northwestern Polytechnic University. The company is dedicated to developing ingenious products to aid people reveal themselves with development. Considering that its production, Makeblock has launched a number of instructional robots, in addition to a coding platform for youngsters. It also introduced the MakeX Robot Competition.
The XTool D1 is a mobile laser engraver that is capable of reducing and inscribing a range of products. Its laser can remove intricate forms much faster than a scroll saw or jigsaw, and also can be utilized for many different tasks. In addition to inscription, the D1 can additionally be used for other jobs, consisting of developing precious jewelry and also lamp tones.
The D1 is a DIY set that can be assembled in only regarding half a hr. Its enclosure is foldable, permitting simple mobility and also effective ventilation. It is also made of flame-retardant polyester, making it safe from dust fragments. The unit additionally shields the functioning surface under the maker.
The XTool D1 is outfitted with a laser module that is capable of engrave on metals and also many other products. It has an ultra-fine pressed laser spot of 0.08 x 0.08 mm. This enables finer inscription and also greater precision.
The D1 additionally has a high resolution of 1000 DPI, which makes it possible to etch on a variety of materials. The D1 also has a built-in smart device application that can be downloaded from the Android Shop or the Apple Application Shop. The app can be used to import laser styles from free vector sites, including Etsy. The D1 can likewise be attached to a computer using USB or WiFi. It can additionally move data by means of Wi-Fi or a huge capacity TF card.
The D1 is capable of engraving on Poplar plywood, which is one of one of the most typically made use of timbers for laser cutters. The D1 can likewise cut on various other woods, consisting of tough maple, walnut, as well as rosewood. Its laser head is flexible, allowing for a 50mm range. It can likewise refine materials as much as 10mm thick, which means that it is able to engrave on a wide range of materials. The D1 is made for both home and service use.
The XTool D1 comes in two models: the 20W version as well as the 5W model. The 20W variation has a larger laser head, and also a smaller working location. The 5W design has a workspace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a much faster maker. Xtool Kc100
The D1 features a steel structure, which offers maximum stability as well as durability. It also has a synchronous belt to improve activity accuracy. The belt’s moderate stress is needed for precision, specifically when moving at high speeds. The concurrent belt can also assist the device stay stable and also minimize resonance. It can likewise get rid of the motion void, enabling fine vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most effective diode laser on the market. It produces clear lines down to 0.06 mm. This makes it a superb option for nearly all etching tasks. Its style is risk-free and dependable. It is suitable for local business and enthusiasts.
It can engrave different types of metal and wood. It has the capability to reduce 8 to tenmm plywood in one pass. It likewise has the ability to cut leather and polymer.
It includes a number of accessories. You can get the bundle pack that consists of the Air Help Set and also Honeycomb Working Panel. It sets you back $119 and $269, specifically. You can additionally get a 1064nm laser head. This head minimizes burn marks in plastic as well as is especially beneficial for fragile precious jewelry styles. It also has an activity sensing unit and also flame discovery sensing unit.
It additionally features an emergency quit button. It can be controlled through Wi-fi and can import laser layouts from totally free vector websites like Etsy. You can also manage it via the Makeblock XTool D1 app on Android and iphone.
It has a great emphasis system. The laser crosshairs relocate as needed and also transfer to the framework of the art work. This makes the etching very exact. It can additionally be utilized to develop a thickening result, which can be valuable when etching huge things.
The XTool D1 Pro has improved functions and also laser power. It uses a 20W laser component to create a beam of light that cuts things in one pass. It can cut through 8mm black acrylic and 10mm basswood. It additionally has a greater rate. It can get to inscribing precision of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating method on this machine is very creative. Alongside the laser component, there is a pivoting arm which you pull out when you intend to concentrate the laser. It guarantees that you drop the directly the proper range from the product. After that you tighten the thumb screw and also pivot the arm back up. Xtool Kc100
XTool D1 Special Features
Here are some of the top Unique Features of the XTool D1:
Wireless Connectivity
Device can be linked using USB or a WiFi. And you can likewise regulate with a smart device app on Android or iOS.
Trimming and also Engraving Different Materials
Engrave: Wood, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Area Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is additionally a really qualified laser cutter.
Cut: Cardboard, Non-woven Material, Timber Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can reduce more than 10mm thick stuff with this laser engraver. The device can reduce wood, especially Poplar plywood which is soft and it is the favored timber for all laser cutters.
I would avoid some plastics like PVC as well as vinyl considering that it releases hydrogen chloride gas while being cut. This gas is poisonous and really corrosive (your equipment will corrosion promptly).
We have checked the device with inscription and also reducing different materials. You will discover the outcomes of our examinations few phases lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have seen on all other makers. This must enable more precision as well as much less mechanical wobble when inscribing at broadband. Xtool Kc100
Advanced Stepper Electric Motor Drivers
The maker has an extremely innovative controller board. It has Trinamic stepper electric motor chauffeurs which drive the electric motors with a pure sine wave. In this manner the electric motors are really exact and also silent. The vehicle drivers additionally sustain homing procedure without utilizing limit changes as the chauffeurs measure current through motors and discover the limit this way. This is why this maker does not need physical limitation changes for homing.
The equipment has drivers for 3 axis– so you can plug in the roller system as a Z axis rather than needing to disconnect one of the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be controlled via Wi-Fi or USB. The laser engraver device automatically quits if an unintentional touch happens. This is great for people that are concerned concerning security. The device is additionally compatible with Windows and Mac OS systems.
The XTool D1 software application is very easy to use. Once you have the artwork prepared, you can make use of the app to establish the laser. You can likewise customize the laser setups and create customized art work. The app additionally includes a materials list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting maker that can etch over 100 products. The laser engraver tool is easy to use as well as includes a protective cover. The maker has a guarantee of year.
XTool D1 Engraving
The XTool D1 is an extremely versatile etching machine. It cam be utilized to etch on all kinds of products/.
Right here is a list of materials and also features that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an extremely well considered maker. Accurate, fast as well as sturdily constructed. It comes at a premium price, however it is worth it for somebody that wants a good and virtually an industrial quality table leading laser engraver efficient in fast cutting as well as accurate engraving thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The first laser engraving and also reducing device on our listing is XTool D1 pro, the best alternative to Glowforge. It is in first place since it has obtained the Red Dot Layout 2022 Honor. The outstanding layout as well as advanced technology set this device besides various other equipments on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, and also XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm timber board at one time, as well as XTool D1-10W can reduce 10mm wood board at once.
Can XTool D1 cut leather?
XTool can reduce and etch a substantial selection of products, from something as slim as cells paper to something as thick as leather as well as timber panels.
XTool D1 is a diode laser engraving and also reducing device that is compatible with a wide range of materials, including various types of wood. Its effective and highly focused laser can quickly reduce and also engraved timber with utmost precision and also precision.
Can the XTool D1 engrave alliminum?
You can additionally get the infrared laser component, which is particularly made for metal and plastic engraving. It can engrave numerous steels, consisting of aluminum and also precious metals. It can additionally do tinted inscribing on various metals, including light weight aluminum.