What is the Makeblock XTool D1? Xtool Vag401 Manual
XTool D1 is a laser cutter that has actually been developed by Makeblock. Xtool Vag401 Manual
The company was developed in 2012 by Jasen Wang, who examined aircraft layout at Northwestern Polytechnic University. The business is dedicated to producing cutting-edge items to aid people share themselves with creation. Considering that its creation, Makeblock has released numerous instructional robotics, along with a coding system for youngsters. It also launched the MakeX Robotic Competitors.
The XTool D1 is a portable laser engraver that can reducing as well as inscribing a selection of products. Its laser can eliminate intricate forms much faster than a scroll saw or jigsaw, and also can be used for several projects. In addition to engraving, the D1 can additionally be made use of for other tasks, consisting of developing jewelry and also light shades.
The D1 is a do it yourself kit that can be put together in just concerning half a hr. Its enclosure is foldable, allowing for easy transportability as well as efficient ventilation. It is likewise made of flame-retardant polyester, making it safe from dirt bits. The unit also shields the working surface area under the machine.
The XTool D1 is outfitted with a laser component that is capable of engrave on steels and also lots of various other products. It has actually an ultra-fine compressed laser place of 0.08 x 0.08 mm. This allows for finer engraving as well as higher accuracy.
The D1 also has a high resolution of 1000 DPI, that makes it feasible to engrave on a wide range of products. The D1 additionally has a built-in smart device app that can be downloaded and install from the Android Shop or the Apple App Store. The application can be made use of to import laser designs from totally free vector websites, including Etsy. The D1 can likewise be attached to a computer through USB or WiFi. It can likewise move information using Wi-Fi or a huge ability TF card.
The D1 is capable of engraving on Poplar plywood, which is one of the most typically used woods for laser cutters. The D1 can likewise cut on other woods, including hard maple, walnut, and rosewood. Its laser head is adjustable, enabling a 50mm variety. It can additionally refine materials approximately 10mm thick, which suggests that it is able to engrave on a variety of products. The D1 is developed for both residence and also business use.
The XTool D1 is available in 2 versions: the 20W version as well as the 5W model. The 20W version has a bigger laser head, and a smaller sized working location. The 5W design has a workspace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a much faster maker. Xtool Vag401 Manual
The D1 includes a steel structure, which offers optimum security and resilience. It additionally has a concurrent belt to improve activity accuracy. The belt’s moderate tension is needed for accuracy, specifically when relocating at high speeds. The synchronous belt can also assist the device keep stable and also decrease vibration. It can also eliminate the motion gap, allowing for great vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most effective diode laser on the marketplace. It creates clear lines down to 0.06 mm. This makes it an outstanding option for nearly all etching tasks. Its layout is risk-free as well as trustworthy. It is suitable for small businesses and also hobbyists.
It can etch different sorts of steel and timber. It has the capability to reduce 8 to tenmm plywood in one pass. It likewise has the capacity to reduce leather and also polymer.
It features a number of accessories. You can acquire the bundle pack that consists of the Air Help Establish and also Honeycomb Working Panel. It costs $119 as well as $269, specifically. You can likewise obtain a 1064nm laser head. This head minimizes melt marks in plastic and is particularly valuable for fragile precious jewelry layouts. It also has a movement sensing unit as well as fire detection sensor.
It additionally features an emergency situation stop button. It can be controlled through WiFi and can import laser styles from complimentary vector websites like Etsy. You can additionally manage it using the Makeblock XTool D1 app on Android as well as iOS.
It has a great emphasis mechanism. The laser crosshairs move as required and also transfer to the structure of the artwork. This makes the engraving very accurate. It can also be utilized to develop a thickening effect, which can be useful when etching huge products.
The XTool D1 Pro has boosted attributes and also laser power. It uses a 20W laser module to create a beam of light that cuts objects in one pass. It can cut through 8mm black acrylic and 10mm basswood. It likewise has a greater speed. It can get to engraving precision of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing approach on this equipment is very brilliant. Alongside the laser component, there is a rotating arm which you take out when you intend to concentrate the laser. It assures that you go down the directly the proper range from the material. Then you tighten the thumb screw as well as pivot the arm back up. Xtool Vag401 Manual
XTool D1 Special Features
Below are some of the top Special Functions of the XTool D1:
Wireless Connectivity
Maker can be attached via USB or a Wi-fi. As well as you can additionally regulate with a mobile phone app on Android or iOS.
Cutting and Inscription Different Materials
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Area Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is likewise a very capable laser cutter.
Cut: Cardboard, Non-woven Fabric, Timber Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can reduce more than 10mm thick stuff with this laser engraver. The equipment can cut wood, specifically Poplar plywood which is soft and also it is the favored wood for all laser cutters.
I would certainly stay clear of some plastics like PVC and also plastic given that it releases hydrogen chloride gas while being cut. This gas is toxic and very harsh (your maker will certainly corrosion swiftly).
We have checked the maker with engraving and cutting various materials. You will discover the outcomes of our tests few chapters lower.
The Makeblock XTool D1 has steel rollers on all axis rather than the plastic ones we have seen on all other makers. This ought to permit even more precision and also less mechanical wobble when engraving at high speeds. Xtool Vag401 Manual
Advanced Stepper Motor Drivers
The maker has an extremely advanced controller board. It has Trinamic stepper motor motorists which drive the electric motors with a pure sine wave. In this manner the motors are really specific and quiet. The chauffeurs additionally support homing treatment without utilizing limit switches over as the motorists gauge current through electric motors as well as discover the limit in this manner. This is why this maker does not require physical limit switches for homing.
The device has motorists for 3 axis– so you can connect in the roller system as a Z axis as opposed to having to disconnect among the axis when working with a roller system.
XTool D1 Software
XTool D1 can be regulated using Wi-Fi or USB. The laser engraver tool automatically stops if an unintentional touch happens. This is great for individuals that are worried regarding security. The device is also suitable with Windows and also Mac OS systems.
The XTool D1 software program is very easy to use. As soon as you have the artwork prepared, you can make use of the app to set up the laser. You can likewise customize the laser setups and develop custom-made artwork. The application also includes a products listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting maker that can etch over 100 products. The laser engraver device is easy to use as well as comes with a protective cover. The maker has a guarantee of year.
XTool D1 Engraving
The XTool D1 is a really flexible engraving maker. It cam be made use of to etch on all types of products/.
Here is a list of products as well as attributes that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a quite possibly considered device. Specific, fast and sturdily developed. It comes at a costs rate, however it is worth it for someone that desires an excellent as well as nearly an industrial quality table top laser engraver efficient in rapid cutting as well as precise inscription thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The initial laser inscription as well as reducing machine on our checklist is XTool D1 pro, the best option to Glowforge. It is in starting point due to the fact that it has actually gotten the Red Dot Style 2022 Honor. The superior design and also modern innovation established this machine in addition to various other devices on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, as well as XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm timber board at once, and XTool D1-10W can cut 10mm timber board at one time.
Can XTool D1 cut leather?
XTool can reduce and also engrave a huge selection of products, from something as slim as cells paper to something as thick as leather and also timber panels.
XTool D1 is a diode laser engraving and also reducing maker that works with a vast array of products, consisting of different sorts of timber. Its effective and highly concentrated laser can quickly cut as well as engraved timber with best accuracy and accuracy.
Can the XTool D1 engrave alliminum?
You can likewise get the infrared laser component, which is especially created steel and plastic inscription. It can etch numerous metals, consisting of aluminum and precious metals. It can also do colored etching on various metals, consisting of light weight aluminum.