What is the Makeblock XTool D1? Xtool Vag401 Update Chip
XTool D1 is a laser cutter that has been created by Makeblock. Xtool Vag401 Update Chip
The firm was established in 2012 by Jasen Wang, who researched airplane layout at Northwestern Polytechnic College. The firm is dedicated to producing ingenious products to help individuals share themselves via development. Since its creation, Makeblock has launched numerous academic robots, in addition to a coding system for youngsters. It likewise released the MakeX Robotic Competition.
The XTool D1 is a mobile laser engraver that can cutting as well as inscribing a range of products. Its laser can eliminate detailed shapes much faster than a scroll saw or jigsaw, as well as can be used for many different jobs. In addition to engraving, the D1 can also be made use of for other tasks, including creating jewelry and lamp tones.
The D1 is a DIY set that can be put together in just regarding half an hour. Its enclosure is collapsible, enabling very easy portability as well as reliable air flow. It is also made of flame-retardant polyester, making it risk-free from dust bits. The enclosure also safeguards the working surface area under the maker.
The XTool D1 is furnished with a laser component that is capable of engrave on metals as well as numerous other materials. It has actually an ultra-fine pressed laser spot of 0.08 x 0.08 mm. This enables finer inscription as well as higher precision.
The D1 likewise has a high resolution of 1000 DPI, that makes it feasible to inscribe on a wide variety of materials. The D1 likewise has an integrated mobile phone application that can be downloaded from the Android Shop or the Apple Application Store. The application can be used to import laser designs from cost-free vector websites, including Etsy. The D1 can also be linked to a computer using USB or WiFi. It can also transfer data by means of Wi-Fi or a big capacity TF card.
The D1 is capable of engraving on Poplar plywood, which is among one of the most commonly made use of timbers for laser cutters. The D1 can likewise cut on other timbers, consisting of tough maple, walnut, and also rosewood. Its laser head is flexible, permitting a 50mm variety. It can also refine materials approximately 10mm thick, which indicates that it has the ability to engrave on a wide array of materials. The D1 is made for both house and company use.
The XTool D1 can be found in two models: the 20W variation as well as the 5W version. The 20W version has a bigger laser head, and a smaller working area. The 5W design has a working area of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, which makes it a quicker maker. Xtool Vag401 Update Chip
The D1 features a steel structure, which provides maximum security and toughness. It likewise has a simultaneous belt to enhance motion precision. The belt’s modest stress is needed for precision, especially when relocating at broadband. The synchronous belt can also aid the device remain secure and lessen resonance. It can additionally eliminate the activity space, permitting great vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most powerful diode laser on the market. It produces clear lines to 0.06 mm. This makes it a superb choice for nearly all etching tasks. Its design is secure and also dependable. It is excellent for small businesses and also hobbyists.
It can engrave different kinds of metal as well as wood. It has the ability to reduce eight to tenmm plywood in one pass. It additionally has the capability to reduce leather and also acrylic.
It features a variety of devices. You can purchase the bundle pack that includes the Air Help Set and Honeycomb Working Panel. It costs $119 and also $269, specifically. You can additionally get a 1064nm laser head. This head minimizes burn marks in plastic and also is especially useful for fragile fashion jewelry layouts. It likewise has a motion sensing unit as well as flame discovery sensor.
It likewise features an emergency stop button. It can be managed through WiFi and can import laser designs from complimentary vector sites like Etsy. You can additionally control it using the Makeblock XTool D1 application on Android as well as iOS.
It has a great focus system. The laser crosshairs relocate as required and also transfer to the framework of the artwork. This makes the inscribing really precise. It can additionally be used to develop a thickening effect, which can be valuable when engraving huge products.
The XTool D1 Pro has improved functions and laser power. It makes use of a 20W laser component to produce a light beam that reduces things in one pass. It can cut through 8mm black acrylic as well as 10mm basswood. It additionally has a greater rate. It can get to engraving accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing approach on this equipment is very brilliant. Next to the laser module, there is a swivelling arm which you pull out when you intend to concentrate the laser. It assures that you go down the head on the correct range from the material. Then you tighten up the thumb screw as well as rotate the arm back up. Xtool Vag401 Update Chip
XTool D1 Special Features
Below are some of the leading Unique Attributes of the XTool D1:
Wireless Connectivity
Equipment can be connected via USB or a WiFi. As well as you can likewise regulate with a mobile phone app on Android or iOS.
Cutting and also Engraving Different Materials
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Cloth, Slate.
The Makeblock XTool D1 is likewise a really qualified laser cutter.
Cut: Cardboard, Non-woven Textile, Timber Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can reduce greater than 10mm thick things with this laser engraver. The machine can cut wood, particularly Poplar plywood which is soft and it is the favored timber for all laser cutters.
I would stay clear of some plastics like PVC as well as plastic considering that it releases hydrogen chloride gas while being cut. This gas is hazardous and really corrosive (your maker will corrosion swiftly).
We have actually checked the machine with engraving and also reducing various materials. You will certainly discover the results of our examinations couple of chapters lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have actually seen on all various other devices. This need to enable more precision and also much less mechanical wobble when etching at high speeds. Xtool Vag401 Update Chip
Advanced Stepper Motor Drivers
The machine has an extremely innovative controller board. It has Trinamic stepper electric motor vehicle drivers which drive the motors with a pure sine wave. This way the electric motors are very exact and quiet. The motorists also sustain homing procedure without utilizing limitation changes as the vehicle drivers determine present through electric motors as well as find the limit by doing this. This is why this maker does not require physical restriction switches over for homing.
The maker has vehicle drivers for 3 axis– so you can connect in the roller system as a Z axis rather than needing to detach among the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be managed using Wi-Fi or USB. The laser engraver tool instantly stops if an accidental touch takes place. This is excellent for people that are concerned regarding security. The device is additionally compatible with Windows as well as Mac OS systems.
The XTool D1 software program is extremely easy to use. Once you have the artwork prepared, you can use the app to set up the laser. You can likewise personalize the laser setups and also produce personalized art work. The app likewise includes a materials listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting device that can engrave over 100 materials. The laser engraver device is easy to use and also includes a protective cover. The device has a service warranty of year.
XTool D1 Engraving
The XTool D1 is an extremely flexible engraving maker. It cam be used to inscribe on all types of materials/.
Right here is a listing of products and also features that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a very well considered machine. Exact, fast and also well developed. It comes with a premium price, however it deserves it for a person that desires a great as well as practically a commercial grade table leading laser engraver with the ability of rapid cutting and precise inscription thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The very first laser engraving as well as reducing device on our list is XTool D1 pro, the very best choice to Glowforge. It remains in top place since it has obtained the Red Dot Layout 2022 Honor. The exceptional layout and also advanced technology established this machine aside from other equipments on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, as well as XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm wood board at once, and XTool D1-10W can cut 10mm timber board at once.
Can XTool D1 cut leather?
XTool can cut as well as inscribe a massive selection of products, from something as slim as tissue paper to something as thick as leather and timber panels.
XTool D1 is a diode laser inscription and cutting device that is compatible with a wide variety of materials, consisting of different types of timber. Its effective and also very concentrated laser can conveniently reduce and engraved wood with supreme precision as well as precision.
Can the XTool D1 engrave alliminum?
You can likewise get the infrared laser component, which is specifically created metal as well as plastic inscription. It can etch numerous metals, consisting of light weight aluminum and precious metals. It can also do colored etching on different steels, including light weight aluminum.