What is the Makeblock XTool D1? Xtool Vag401 Update
XTool D1 is a laser cutter that has been created by Makeblock. Xtool Vag401 Update
The company was developed in 2012 by Jasen Wang, who researched airplane design at Northwestern Polytechnic College. The business is dedicated to producing ingenious items to assist people share themselves through creation. Considering that its development, Makeblock has actually launched several instructional robotics, along with a coding system for youngsters. It likewise introduced the MakeX Robot Competitors.
The XTool D1 is a mobile laser engraver that can cutting as well as inscribing a selection of materials. Its laser can remove elaborate shapes much faster than a scroll saw or jigsaw, and also can be made use of for many different projects. Along with engraving, the D1 can also be used for other projects, consisting of producing precious jewelry and also light tones.
The D1 is a DIY set that can be set up in just about half a hr. Its room is collapsible, permitting easy transportability and also reliable air flow. It is additionally made of flame-retardant polyester, making it risk-free from dirt particles. The unit also shields the functioning surface area under the device.
The XTool D1 is geared up with a laser component that is capable of engrave on metals and several various other products. It has an ultra-fine pressed laser place of 0.08 x 0.08 mm. This allows for finer engraving and also greater accuracy.
The D1 also has a high resolution of 1000 DPI, which makes it feasible to engrave on a wide variety of products. The D1 likewise has an integrated mobile phone app that can be downloaded and install from the Android Store or the Apple Application Store. The application can be used to import laser designs from totally free vector sites, including Etsy. The D1 can also be attached to a computer via USB or WiFi. It can also transfer information via Wi-Fi or a huge capacity TF card.
The D1 is capable of engraving on Poplar plywood, which is just one of the most commonly made use of woods for laser cutters. The D1 can likewise reduce on various other woods, consisting of difficult maple, walnut, and rosewood. Its laser head is flexible, permitting a 50mm variety. It can additionally process materials as much as 10mm thick, which indicates that it is able to engrave on a variety of products. The D1 is developed for both home as well as organization use.
The XTool D1 can be found in 2 versions: the 20W variation as well as the 5W version. The 20W version has a bigger laser head, and a smaller working area. The 5W design has a workspace of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, that makes it a faster maker. Xtool Vag401 Update
The D1 includes a steel frame, which offers maximum stability and longevity. It likewise has a simultaneous belt to boost motion accuracy. The belt’s moderate tension is needed for accuracy, especially when relocating at broadband. The synchronous belt can likewise aid the maker keep stable and minimize vibration. It can also remove the movement space, permitting fine vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most effective diode laser on the market. It creates clear lines to 0.06 mm. This makes it a superb choice for mostly all engraving tasks. Its design is risk-free and also trustworthy. It is ideal for small businesses and also hobbyists.
It can etch different types of steel and also timber. It has the capacity to cut 8 to tenmm plywood in one pass. It additionally has the capability to cut leather and polymer.
It comes with a variety of accessories. You can purchase the package pack that consists of the Air Assist Establish and Honeycomb Working Panel. It costs $119 and $269, respectively. You can also get a 1064nm laser head. This head minimizes shed marks in plastic and also is particularly valuable for fragile precious jewelry styles. It also has a motion sensing unit as well as fire detection sensor.
It also includes an emergency quit switch. It can be regulated via Wi-fi and also can import laser designs from totally free vector sites like Etsy. You can additionally manage it by means of the Makeblock XTool D1 app on Android as well as iphone.
It has a great focus device. The laser crosshairs relocate as needed and also transfer to the frame of the art work. This makes the etching very exact. It can also be used to develop a thickening result, which can be valuable when engraving big products.
The XTool D1 Pro has actually enhanced features and laser power. It utilizes a 20W laser component to develop a beam that reduces objects in one pass. It can cut through 8mm black acrylic as well as 10mm basswood. It additionally has a greater speed. It can reach engraving accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing technique on this maker is very clever. Alongside the laser component, there is a swivelling arm which you take out when you wish to concentrate the laser. It guarantees that you drop the head on the appropriate range from the material. After that you tighten up the thumb screw and pivot the arm back up. Xtool Vag401 Update
XTool D1 Special Features
Right here are a few of the top Special Functions of the XTool D1:
Wireless Connection
Equipment can be linked using USB or a Wi-fi. And you can also manage with a smartphone application on Android or iphone.
Trimming and Engraving Different Products
Engrave: Wood, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Layer Steel, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is likewise an extremely qualified laser cutter.
Cut: Cardboard, Non-woven Material, Wood Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can reduce more than 10mm thick things with this laser engraver. The device can cut wood, specifically Poplar plywood which is soft and also it is the favored wood for all laser cutters.
I would avoid some plastics like PVC and plastic since it releases hydrogen chloride gas while being cut. This gas is toxic and also extremely destructive (your maker will corrosion rapidly).
We have actually tested the maker with engraving and reducing different products. You will locate the results of our examinations few chapters lower.
The Makeblock XTool D1 has steel rollers on all axis rather than the plastic ones we have actually seen on all other equipments. This should allow for more accuracy and also less mechanical wobble when inscribing at high speeds. Xtool Vag401 Update
Advanced Stepper Motor Drivers
The machine has an extremely innovative controller board. It has Trinamic stepper motor vehicle drivers which drive the electric motors with a pure sine wave. This way the electric motors are extremely specific and also silent. The vehicle drivers also sustain homing treatment without utilizing limit switches as the motorists determine existing via motors and also identify the limit by doing this. This is why this maker does not need physical limit switches for homing.
The equipment has vehicle drivers for 3 axis– so you can plug in the roller system as a Z axis instead of having to separate one of the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be regulated through Wi-Fi or USB. The laser engraver device automatically stops if an unexpected touch occurs. This is terrific for people that are worried regarding safety. The device is additionally compatible with Windows and also Mac OS systems.
The XTool D1 software is really easy to use. Once you have actually the art work prepared, you can utilize the app to set up the laser. You can also tailor the laser setups and also develop customized art work. The app additionally consists of a products listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting maker that can etch over 100 materials. The laser engraver tool is easy to use and also comes with a protective cover. The maker has a service warranty of 12 months.
XTool D1 Engraving
The XTool D1 is a very flexible engraving device. It cam be made use of to etch on all types of materials/.
Right here is a list of products and functions that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a quite possibly considered device. Precise, fast as well as well constructed. It comes at a costs cost, however it is worth it for someone that desires a good as well as practically an industrial grade table leading laser engraver efficient in quick cutting and also accurate inscription thanks to an effective 10W laser component.
Is XTool better than Glowforge?
The initial laser engraving as well as cutting machine on our listing is XTool D1 pro, the most effective option to Glowforge. It is in first place since it has actually gotten the Red Dot Layout 2022 Award. The impressive design and modern innovation set this maker in addition to various other makers on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, and also XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm wood board at one time, and also XTool D1-10W can cut 10mm timber board at one time.
Can XTool D1 cut leather?
XTool can reduce and etch a big variety of materials, from something as slim as cells paper to something as thick as leather and also timber panels.
XTool D1 is a diode laser inscription as well as cutting equipment that is compatible with a wide variety of products, including various sorts of wood. Its powerful as well as extremely concentrated laser can easily reduce as well as engraved wood with supreme precision and accuracy.
Can the XTool D1 engrave alliminum?
You can likewise get the infrared laser component, which is specifically made for steel as well as plastic engraving. It can etch numerous metals, including aluminum and also precious metals. It can likewise do colored engraving on various metals, consisting of light weight aluminum.