What is the Makeblock XTool D1? Xtool X100 Pro Acura
XTool D1 is a laser cutter that has actually been produced by Makeblock. Xtool X100 Pro Acura
The firm was developed in 2012 by Jasen Wang, who examined aircraft design at Northwestern Polytechnic College. The firm is dedicated to developing innovative items to assist people express themselves with production. Given that its development, Makeblock has launched numerous educational robots, along with a coding system for kids. It additionally launched the MakeX Robot Competition.
The XTool D1 is a mobile laser engraver that can cutting as well as inscribing a range of products. Its laser can remove intricate forms much faster than a scroll saw or jigsaw, and can be utilized for several projects. In addition to inscription, the D1 can also be made use of for various other tasks, including creating jewelry and lamp shades.
The D1 is a DIY kit that can be set up in only concerning half an hour. Its enclosure is collapsible, allowing for very easy transportability and also effective ventilation. It is additionally made of flame-retardant polyester, making it safe from dust fragments. The unit also protects the functioning surface under the equipment.
The XTool D1 is furnished with a laser component that is capable of engrave on steels and also several other materials. It has actually an ultra-fine compressed laser area of 0.08 x 0.08 mm. This permits finer engraving and also higher accuracy.
The D1 likewise has a high resolution of 1000 DPI, that makes it possible to etch on a vast array of products. The D1 also has a built-in mobile phone application that can be downloaded and install from the Android Store or the Apple Application Shop. The application can be utilized to import laser layouts from complimentary vector sites, including Etsy. The D1 can also be attached to a computer system through USB or WiFi. It can also transfer data via Wi-Fi or a large capability TF card.
The D1 is capable of engraving on Poplar plywood, which is one of the most typically used woods for laser cutters. The D1 can also cut on other timbers, including hard maple, walnut, and rosewood. Its laser head is flexible, allowing for a 50mm range. It can also process materials approximately 10mm thick, which implies that it is able to inscribe on a wide array of products. The D1 is made for both residence and service use.
The XTool D1 is available in 2 versions: the 20W version as well as the 5W design. The 20W version has a larger laser head, and also a smaller working location. The 5W design has a workspace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a faster device. Xtool X100 Pro Acura
The D1 features a steel frame, which gives maximum security as well as sturdiness. It additionally has a concurrent belt to improve activity precision. The belt’s modest stress is required for precision, specifically when relocating at broadband. The concurrent belt can also aid the equipment remain steady and also decrease vibration. It can likewise eliminate the activity space, enabling great vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most powerful diode laser on the marketplace. It generates clear lines down to 0.06 mm. This makes it an excellent choice for mostly all inscribing jobs. Its design is safe as well as reliable. It is optimal for small companies and enthusiasts.
It can inscribe different kinds of steel and timber. It has the capability to cut 8 to tenmm plywood in one pass. It also has the ability to cut leather and also acrylic.
It features a variety of devices. You can purchase the package pack that includes the Air Assist Establish and Honeycomb Working Panel. It costs $119 and also $269, respectively. You can additionally get a 1064nm laser head. This head minimizes burn marks in plastic as well as is especially valuable for delicate precious jewelry designs. It additionally has a movement sensing unit as well as fire detection sensing unit.
It additionally includes an emergency quit button. It can be regulated with WiFi and also can import laser designs from cost-free vector sites like Etsy. You can likewise regulate it by means of the Makeblock XTool D1 app on Android as well as iOS.
It has a great focus mechanism. The laser crosshairs move as needed and also transfer to the structure of the art work. This makes the inscribing very specific. It can additionally be used to produce a thickening result, which can be helpful when etching huge products.
The XTool D1 Pro has actually enhanced attributes and also laser power. It makes use of a 20W laser component to create a light beam that cuts items in one pass. It can puncture 8mm black acrylic and 10mm basswood. It likewise has a greater rate. It can get to etching precision of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating technique on this equipment is really smart. Beside the laser component, there is a pivoting arm which you pull out when you intend to concentrate the laser. It guarantees that you go down the directly the correct distance from the material. After that you tighten the thumb screw and also rotate the arm back up. Xtool X100 Pro Acura
XTool D1 Special Features
Below are a few of the leading Unique Features of the XTool D1:
Wireless Connectivity
Device can be attached through USB or a Wi-fi. As well as you can also regulate with a mobile phone app on Android or iphone.
Trimming and also Engraving Different Materials
Engrave: Timber, Bamboo, Cardboard, Plastic, Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Layer Metal, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is also a very capable laser cutter.
Cut: Cardboard, Non-woven Textile, Wood Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can reduce greater than 10mm thick things with this laser engraver. The device can reduce timber, particularly Poplar plywood which is soft as well as it is the preferred wood for all laser cutters.
I would certainly stay clear of some plastics like PVC and plastic given that it launches hydrogen chloride gas while being cut. This gas is hazardous as well as extremely harsh (your maker will certainly corrosion quickly).
We have actually examined the equipment with inscription and cutting different products. You will locate the outcomes of our examinations couple of chapters lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have seen on all other makers. This must enable even more precision as well as less mechanical wobble when inscribing at high speeds. Xtool X100 Pro Acura
Advanced Stepper Electric Motor Drivers
The maker has a really innovative controller board. It has Trinamic stepper motor drivers which drive the motors with a pure sine wave. By doing this the motors are really accurate and also quiet. The chauffeurs also support homing procedure without making use of limitation changes as the drivers gauge current via electric motors and find the limit by doing this. This is why this maker does not require physical limit changes for homing.
The machine has vehicle drivers for 3 axis– so you can connect in the roller system as a Z axis as opposed to needing to disconnect among the axis when working with a roller system.
XTool D1 Software
XTool D1 can be regulated through Wi-Fi or USB. The laser engraver device immediately stops if an unintentional touch occurs. This is great for individuals who are worried regarding safety. The device is also suitable with Windows as well as Mac OS systems.
The XTool D1 software is really easy to use. As soon as you have the artwork prepared, you can use the app to establish the laser. You can likewise customize the laser settings as well as develop custom art work. The app likewise includes a products list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing maker that can inscribe over 100 products. The laser engraver device is easy to use and includes a protective cover. The equipment has a warranty of one year.
XTool D1 Engraving
The XTool D1 is a really flexible inscribing equipment. It cam be made use of to etch on all sorts of products/.
Right here is a checklist of products as well as attributes that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an extremely well thought out device. Accurate, quick and also sturdily constructed. It comes at a premium rate, but it is worth it for someone that wants an excellent and almost a commercial grade table top laser engraver efficient in quick cutting and also exact engraving thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The first laser engraving and also reducing machine on our checklist is XTool D1 pro, the best option to Glowforge. It is in starting point due to the fact that it has actually obtained the Red Dot Style 2022 Honor. The impressive layout and also advanced innovation established this device in addition to various other makers on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, and also XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm timber board at once, and XTool D1-10W can cut 10mm wood board at one time.
Can XTool D1 cut leather?
XTool can reduce and also etch a massive selection of materials, from something as slim as cells paper to something as thick as natural leather as well as wood panels.
XTool D1 is a diode laser inscription and cutting device that works with a variety of products, including various sorts of timber. Its powerful as well as highly focused laser can quickly cut as well as etched wood with best accuracy and precision.
Can the XTool D1 engrave alliminum?
You can likewise obtain the infrared laser module, which is particularly produced steel and plastic engraving. It can etch various metals, including light weight aluminum and also rare-earth elements. It can also do colored inscribing on different steels, consisting of aluminum.