What is the Makeblock XTool D1? Xtool X100 Pro Login Dealer
XTool D1 is a laser cutter that has actually been produced by Makeblock. Xtool X100 Pro Login Dealer
The business was developed in 2012 by Jasen Wang, who researched airplane design at Northwestern Polytechnic University. The company is devoted to producing cutting-edge products to help individuals express themselves through production. Because its development, Makeblock has released a number of educational robotics, along with a coding system for youngsters. It additionally introduced the MakeX Robotic Competition.
The XTool D1 is a mobile laser engraver that is capable of cutting as well as inscribing a range of products. Its laser can cut out intricate forms much faster than a scroll saw or jigsaw, and can be used for various jobs. In addition to inscription, the D1 can also be utilized for other tasks, including creating jewelry as well as light shades.
The D1 is a DIY package that can be set up in just about half a hr. Its enclosure is foldable, enabling simple mobility and also reliable ventilation. It is additionally made from flame-retardant polyester, making it safe from dust particles. The room additionally protects the working surface area under the machine.
The XTool D1 is equipped with a laser module that can engrave on metals and also several other products. It has an ultra-fine compressed laser place of 0.08 x 0.08 mm. This allows for finer engraving as well as greater accuracy.
The D1 likewise has a high resolution of 1000 DPI, which makes it feasible to etch on a vast array of products. The D1 additionally has a built-in mobile phone application that can be downloaded and install from the Android Shop or the Apple App Shop. The app can be utilized to import laser designs from free vector sites, consisting of Etsy. The D1 can additionally be connected to a computer system by means of USB or WiFi. It can also transfer data using Wi-Fi or a huge capacity TF card.
The D1 is capable of inscribing on Poplar plywood, which is one of one of the most commonly utilized timbers for laser cutters. The D1 can additionally reduce on various other timbers, including difficult maple, walnut, and also rosewood. Its laser head is adjustable, allowing for a 50mm array. It can also refine materials as much as 10mm thick, which means that it has the ability to etch on a wide array of products. The D1 is created for both residence as well as service use.
The XTool D1 is available in 2 designs: the 20W version and also the 5W design. The 20W variation has a larger laser head, and a smaller sized working area. The 5W version has a working area of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, which makes it a quicker machine. Xtool X100 Pro Login Dealer
The D1 features a steel framework, which provides optimum stability as well as resilience. It additionally has a synchronous belt to improve motion precision. The belt’s moderate tension is required for accuracy, particularly when relocating at high speeds. The simultaneous belt can likewise help the equipment stay steady and decrease resonance. It can also eliminate the activity gap, allowing for fine vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most effective diode laser on the market. It creates clear lines down to 0.06 mm. This makes it an exceptional selection for mostly all inscribing tasks. Its design is safe and also trustworthy. It is ideal for small businesses as well as enthusiasts.
It can engrave different types of metal and wood. It has the capability to reduce eight to tenmm plywood in one pass. It additionally has the capacity to cut leather as well as polymer.
It features a variety of devices. You can buy the bundle pack that includes the Air Assist Establish and also Honeycomb Working Panel. It sets you back $119 and also $269, respectively. You can additionally obtain a 1064nm laser head. This head lowers shed marks in plastic and is specifically valuable for fragile fashion jewelry styles. It additionally has a movement sensing unit as well as flame detection sensor.
It additionally includes an emergency quit switch. It can be controlled via WiFi as well as can import laser layouts from cost-free vector websites like Etsy. You can likewise control it through the Makeblock XTool D1 application on Android and iphone.
It has a great emphasis device. The laser crosshairs move as needed as well as move to the structure of the artwork. This makes the etching extremely specific. It can likewise be utilized to develop a thickening effect, which can be valuable when etching big items.
The XTool D1 Pro has actually improved attributes and laser power. It uses a 20W laser component to develop a beam that cuts items in one pass. It can puncture 8mm black acrylic and also 10mm basswood. It likewise has a greater rate. It can reach engraving precision of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing method on this machine is extremely creative. Next to the laser component, there is a rotating arm which you take out when you wish to concentrate the laser. It assures that you go down the head on the appropriate range from the material. Then you tighten up the thumb screw and also rotate the arm back up. Xtool X100 Pro Login Dealer
XTool D1 Special Features
Below are a few of the top Unique Functions of the XTool D1:
Wireless Connectivity
Machine can be attached via USB or a Wi-fi. As well as you can also control with a smart device app on Android or iphone.
Trimming as well as Engraving Different Materials
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Area Layer Steel, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is also a really capable laser cutter.
Cut: Cardboard, Non-woven Material, Wood Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can cut greater than 10mm thick stuff with this laser engraver. The device can reduce wood, specifically Poplar plywood which is soft as well as it is the favored timber for all laser cutters.
I would certainly stay clear of some plastics like PVC and also vinyl since it launches hydrogen chloride gas while being reduced. This gas is hazardous and also very harsh (your maker will rust swiftly).
We have actually checked the device with inscription as well as cutting various products. You will certainly find the outcomes of our examinations couple of phases lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have actually seen on all other devices. This need to allow for even more precision and much less mechanical wobble when inscribing at high speeds. Xtool X100 Pro Login Dealer
Advanced Stepper Electric Motor Drivers
The equipment has a very advanced controller board. It has Trinamic stepper motor drivers which drive the electric motors with a pure sine wave. This way the motors are really exact and quiet. The vehicle drivers additionally sustain homing treatment without using limit switches as the drivers determine present with motors as well as detect the limit in this manner. This is why this equipment does not require physical limit changes for homing.
The maker has drivers for 3 axis– so you can connect in the roller system as a Z axis rather than needing to detach among the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be controlled using Wi-Fi or USB. The laser engraver device instantly stops if an unintentional touch takes place. This is terrific for people that are worried about security. The device is also compatible with Windows and Mac OS systems.
The XTool D1 software application is very easy to use. As soon as you have the art work prepared, you can utilize the application to set up the laser. You can additionally personalize the laser setups and produce custom artwork. The application additionally consists of a materials listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing machine that can engrave over 100 materials. The laser engraver tool is easy to use and includes a protective cover. The equipment has a guarantee of 12 months.
XTool D1 Engraving
The XTool D1 is a really versatile etching equipment. It cam be made use of to inscribe on all types of materials/.
Below is a list of materials and also attributes that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a very well thought out device. Specific, fast and well constructed. It comes with a costs cost, however it deserves it for a person that wants a great and also nearly an industrial quality table top laser engraver with the ability of rapid cutting as well as accurate engraving thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The first laser inscription and cutting machine on our checklist is XTool D1 pro, the most effective alternative to Glowforge. It is in top place since it has gotten the Red Dot Style 2022 Award. The outstanding style and also modern innovation established this machine apart from various other machines on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, and XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm timber board at one time, and XTool D1-10W can cut 10mm timber board at one time.
Can XTool D1 cut leather?
XTool can cut and etch a massive range of materials, from something as slim as cells paper to something as thick as leather as well as wood panels.
XTool D1 is a diode laser engraving and cutting equipment that is compatible with a wide variety of products, including various sorts of timber. Its powerful and very focused laser can conveniently cut and also inscribed timber with best precision and also accuracy.
Can the XTool D1 engrave alliminum?
You can also get the infrared laser module, which is particularly produced steel as well as plastic engraving. It can engrave various steels, consisting of light weight aluminum and also rare-earth elements. It can also do tinted engraving on different metals, including light weight aluminum.