What is the Makeblock XTool D1? Xtool X300 Plus Software
XTool D1 is a laser cutter that has been created by Makeblock. Xtool X300 Plus Software
The business was developed in 2012 by Jasen Wang, that researched aircraft layout at Northwestern Polytechnic College. The business is devoted to developing ingenious products to assist people reveal themselves with creation. Because its creation, Makeblock has actually released several academic robotics, as well as a coding platform for youngsters. It likewise launched the MakeX Robot Competition.
The XTool D1 is a mobile laser engraver that can reducing and inscribing a range of materials. Its laser can eliminate intricate forms much faster than a scroll saw or jigsaw, and can be used for various jobs. In addition to engraving, the D1 can also be used for other jobs, including developing precious jewelry as well as light tones.
The D1 is a do it yourself kit that can be set up in only concerning half a hr. Its enclosure is foldable, allowing for simple transportability and efficient ventilation. It is additionally made of flame-retardant polyester, making it safe from dust fragments. The enclosure also shields the working surface area under the maker.
The XTool D1 is furnished with a laser component that is capable of engrave on steels and also many other products. It has an ultra-fine pressed laser place of 0.08 x 0.08 mm. This allows for finer engraving as well as higher accuracy.
The D1 additionally has a high resolution of 1000 DPI, that makes it feasible to engrave on a large range of materials. The D1 likewise has a built-in smartphone application that can be downloaded from the Android Shop or the Apple Application Store. The application can be used to import laser styles from totally free vector websites, including Etsy. The D1 can also be linked to a computer system through USB or WiFi. It can also transfer information through Wi-Fi or a large ability TF card.
The D1 can engraving on Poplar plywood, which is one of one of the most frequently used timbers for laser cutters. The D1 can also cut on various other woods, including tough maple, walnut, as well as rosewood. Its laser head is adjustable, permitting a 50mm range. It can likewise process products up to 10mm thick, which means that it has the ability to inscribe on a wide array of materials. The D1 is created for both residence as well as service use.
The XTool D1 is available in 2 designs: the 20W variation as well as the 5W version. The 20W version has a bigger laser head, and a smaller working location. The 5W design has a workplace of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, which makes it a quicker maker. Xtool X300 Plus Software
The D1 includes a steel frame, which provides maximum stability as well as resilience. It additionally has a concurrent belt to improve motion accuracy. The belt’s modest tension is required for precision, specifically when relocating at high speeds. The concurrent belt can additionally aid the equipment keep stable and also lessen resonance. It can likewise eliminate the activity gap, permitting great vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most effective diode laser on the marketplace. It generates clear lines down to 0.06 mm. This makes it a superb selection for nearly all inscribing tasks. Its style is secure as well as trusted. It is ideal for small companies and also hobbyists.
It can engrave various kinds of metal as well as wood. It has the capacity to cut eight to tenmm plywood in one pass. It likewise has the ability to cut leather and acrylic.
It comes with a number of accessories. You can acquire the bundle pack that includes the Air Assist Establish and Honeycomb Working Panel. It costs $119 and also $269, specifically. You can likewise get a 1064nm laser head. This head decreases melt marks in plastic and is specifically useful for delicate jewelry layouts. It likewise has an activity sensor and also fire detection sensor.
It likewise features an emergency quit switch. It can be managed with Wi-fi and also can import laser designs from complimentary vector sites like Etsy. You can likewise control it via the Makeblock XTool D1 app on Android and also iOS.
It has a great focus system. The laser crosshairs move as required and relocate to the framework of the artwork. This makes the inscribing really precise. It can likewise be utilized to develop a thickening impact, which can be beneficial when engraving big items.
The XTool D1 Pro has boosted attributes and laser power. It uses a 20W laser module to create a light beam that cuts objects in one pass. It can cut through 8mm black acrylic as well as 10mm basswood. It additionally has a higher rate. It can get to engraving accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating technique on this maker is very clever. Alongside the laser component, there is a rotating arm which you pull out when you intend to focus the laser. It ensures that you go down the directly the appropriate range from the product. Then you tighten up the thumb screw as well as swivel the arm back up. Xtool X300 Plus Software
XTool D1 Special Features
Right here are some of the leading Special Attributes of the XTool D1:
Wireless Connectivity
Equipment can be attached via USB or a Wi-fi. And you can also regulate with a smart device application on Android or iOS.
Cutting and Engraving Different Materials
Engrave: Timber, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Layer Metal, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is additionally an extremely capable laser cutter.
Cut: Cardboard, Non-woven Fabric, Timber Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can cut more than 10mm thick stuff with this laser engraver. The maker can reduce timber, particularly Poplar plywood which is soft as well as it is the preferred wood for all laser cutters.
I would certainly prevent some plastics like PVC and plastic because it launches hydrogen chloride gas while being reduced. This gas is toxic as well as very destructive (your device will certainly rust swiftly).
We have evaluated the machine with inscription and also reducing different products. You will locate the outcomes of our examinations few phases lower.
The Makeblock XTool D1 has steel rollers on all axis rather than the plastic ones we have actually seen on all other machines. This need to allow for more precision as well as much less mechanical wobble when etching at high speeds. Xtool X300 Plus Software
Advanced Stepper Motor Drivers
The equipment has a very advanced controller board. It has Trinamic stepper motor motorists which drive the motors with a pure sine wave. In this manner the motors are extremely precise as well as quiet. The motorists likewise support homing procedure without making use of restriction switches over as the motorists measure present through motors and also detect the limit this way. This is why this equipment does not require physical limit switches over for homing.
The machine has vehicle drivers for 3 axis– so you can plug in the roller system as a Z axis rather than needing to disconnect among the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be regulated through Wi-Fi or USB. The laser engraver tool automatically stops if an accidental touch happens. This is wonderful for people who are worried regarding safety and security. The tool is also compatible with Windows as well as Mac OS systems.
The XTool D1 software application is very easy to use. When you have actually the art work prepared, you can make use of the application to establish the laser. You can also personalize the laser settings and also produce personalized artwork. The app also includes a materials list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing equipment that can etch over 100 materials. The laser engraver tool is easy to use as well as features a protective cover. The equipment has a guarantee of one year.
XTool D1 Engraving
The XTool D1 is a very functional etching maker. It cam be made use of to inscribe on all sorts of products/.
Right here is a checklist of materials and also features that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a quite possibly considered machine. Precise, quick as well as well built. It comes at a costs price, however it is worth it for somebody that desires a great as well as virtually an industrial grade table leading laser engraver with the ability of rapid cutting as well as precise engraving thanks to a powerful 10W laser component.
Is XTool better than Glowforge?
The initial laser engraving and cutting equipment on our list is XTool D1 pro, the best option to Glowforge. It is in first place because it has actually received the Red Dot Style 2022 Award. The exceptional style and also modern innovation established this machine apart from other devices on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, as well as XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm timber board at once, and XTool D1-10W can cut 10mm timber board at one time.
Can XTool D1 cut leather?
XTool can reduce and also etch a substantial selection of materials, from something as slim as cells paper to something as thick as natural leather as well as wood panels.
XTool D1 is a diode laser engraving and also reducing maker that works with a vast array of materials, consisting of various sorts of wood. Its powerful and also extremely focused laser can easily reduce and also inscribed wood with ultimate accuracy as well as accuracy.
Can the XTool D1 engrave alliminum?
You can also obtain the infrared laser module, which is especially produced metal and plastic engraving. It can etch various metals, consisting of light weight aluminum and precious metals. It can also do colored engraving on various steels, including aluminum.